Raymarine 520 PLUS, 620 PLUS, PLUS Series Quick Reference Card

Quick Reference Card: PLUS Series Mono LCD Chart Display

86057_2

D5704-1

Soft Key Labels:

Change when you press a key.

Default soft key labels are shown.

Chartplotter

ROUTE GOTO SCREEN

FIND SHIP

Trackpad

Controls cursor position and the slider values.
Hold the trackpad down to move the cursor faster.

CLEAR
Cancels operation in progress and returns to the
previous display.
Deletes an object/function under cursor control.

ENTER
Confirms selection and (if appropriate) clears current soft
key labels. It performs the selected task, accepts changes,
or displays more options.
When cursor text is displayed, takes cursor control
of the object.
When arrow-head cursor symbol is displayed, drops the
object under cursor control.

Soft keys

Press to select option, or slider.
Labels change when you press soft/dedicated key.
Elipses (...) after the text indicate that pressing soft key
leads to a further display of soft key options.

POWER

Press and hold until unit beeps to turn on display.
Press for 3 seconds to turn off display.

Press soft key to display required setup menu, then use trackpad
to select option and soft key to change option.
Press ENTER to close menu, and CLEAR to finish.

SYSTEM

SET UP¬

CHART

SET UP¬

TRACK

SET UP¬

GPS

SET UP¬

MENU

Provides access to setup options.

- Press to display

soft keys.

Press soft keys to toggle window on/off and to select
lower window.
Press ENTER to finish.

SELECT

WINDOWS

WINDOWS

OFF ON

DISPLAY

Controls display mode and windows.

- Press for display mode and soft keys display.

- Press again to toggle through display modes, then ENTER.

- Press and hold for 2 seconds for full screen display.

Press soft key to place waypoint at cursor or vessel, or display the
waypoint list/user card menu and asscociated soft keys.
Press ENTER to finish.

MARKS / MOB
Controls waypoints, and Man Overboard function.

- Press to display waypoint soft keys.

- Press and hold for 2 seconds to activate or cancel MOB.

PLACE WPT
AT CURSOR

PLACE WPT
AT VESSEL

WAYPOINT

LIST

LOAD/SAVE
USER CARD

VRM/EBL

Use to measure range and bearing to/between points.

- Position cursor at start point, and press VRM/EBL key to display the
Ruler data box. Select end point using trackpad, and press ENTER to fix
end position of ruler.

GAIN

Not used in Chart mode.

MULTI

Controls display lighting and contrast.

- Press to display sliders.

RANGE

Controls chart scale.
Displayed vertical distances shown in the Status Bar.

- Press top of key to increase the chart distance.

- Press bottom of key to decrease the chart distance.

- Press and hold to change the scale faster.

Select a slider using the soft key or trackpad.
Toggle between off/on by pressing the soft key again.
Adjust slider using trackpad, and press ENTER to finish.

O
F
F

60%

LIGHT CONTRAST

ALARMS

Use to set up the chartplotter alarms.

- Press to display the Alarms set up menu and soft keys,
the soft keys correspond to the selected alarm.

SELECT ARRIVAL

ALARM RADIUS

ALARMS SET UP

OFF TRACK ALARM

ANCHOR ALARM

COUNTDOWN TIMER

ALARM CLOCK

OFF

OFF

00:33:00

OFF

ARRIVAL ALARM 0.01nm

Use the trackball to select the alarm, then use the softkeys to adjust
parameters and/or toggle the alarm on/off.
Press ENTER to finish.

Use the softkeys to edit the current route.
Press UNDO WAYPOINT to remove the last waypoint in a route. Press
PLACE waypoint and/or select a waypoint from the Waypoint List, to add
a waypoint at the end of the route.
Press ACCEPT ROUTE to finish.

Use the soft keys to set up a series of waypoints as a route.
Use the trackpad to move the cursor then press PLACE WAYPOINT, and/or
select a waypoint from the Waypoint List. Continue until the route is complete.
Press ACCEPT ROUTE to finish.

MAKE

ROUTE

PLACE

WAYPOINT

UNDO

WAYPOINT

ACCEPT

ROUTE

ROUTE

PLACE

WAYPOINT

UNDO

WAYPOINT

ACCEPT

ROUTE

CLEAR
ROUTE

Press to clear the current route from the display, if it is not saved you
are prompted to save the route.

EDIT

ROUTE

Status Bar

Vessel Position

Cursor -

selecting chart object

Cursor position box

Shows the current
cursor position as
either Range/Bearing
or Lat/Long. You can
move this box to your
preferred position on
the screen or turn it off.

Waypoint

Object data box -

for object selected
by cursor

Default soft key labels

These can be turned off: press any soft key to redisplay them.
Different labels are displayed when you press a key.

Depth Area

Chart Range

Chart Boundary

Press to navigate to the cursor position.
When you press GOTO CURSOR, a temporary waypoint is added at the
cursor position and the GOTO is started. Press STOP GOTO to cancel.

STOP
GOTO

GOTO

CURSOR

Use to navigate to a waypoint selected from the waypoint database list.
Use the trackpad to select the waypoint then press the soft key to start
the GOTO.

GOTO

WAYPOINT

GOTO

WAYPOINT

FOLLOW

ROUTE

GOTO

CURSOR

STOP

FOLLOW

RESTART

XTE

WAYPOINT

ADVANCE

Press to follow the current route.
Use the softkeys to cancel the follow, or to modify the route whilst it is
being followed

GOTO

Text Label

A-B
BOX
COG
HDG
MOB
MRK
POS
RTE
TIDE
WPT

Context Sensitive Cursor Control

When the cursor is positioned over special features on the display, a text label appears
to identify the feature. Depending on the feature, you can then move, re-size or delete it.

Feature

Ruler line
Data box (any type)
Course Over Ground Vector
Heading Vector
Man OverBoard Marker
Mark
Vessel's Position
Route Leg
Tide Vector
Waypoint

Move (for example, a waypoint)

Delete (for example, a waypoint)

1.

2.

3.

4.

1.

2.

Use the soft keys to manage the route database list.
Use the trackpad to select a route then press the required softkey.

ROUTE

LIST

Use to save and name the current route.

MORE¬

Press to reverse the waypoint order in the current route.

REVERSE

ROUTE

YES NO

NAME ROUTE

SAVE

ROUTE

SHOW

ROUTE

ERASE
ROUTE

ROUTE

INFO

NAME

ROUTE

ROUTE

Default Display

Soft Keys

Soft Keys

Soft Keys

D5709_1

WPT

WPT

WPT

WPT

USE WPT

LIST

USE WPT

LIST

WPT