Ravpower RP-PB19 User Manual

Specications

Technische Daten┇Spécications┇Especicaciones┇ Speciche Tecniche┇製品仕様

Model
Battery Capacity
Micro USB Input
iSmart Output
iSmart Output
Total Output
Rated Capacity

RP-PB19
16750mAh / 60.8Wh
5V ⎓ 2A, 10W Max.
5V ⎓ 2.4A, 12W Max.
5V ⎓ 2.1A, 10.5W Max.
5V ⎓ 4.5A, 22.5W Max.
5V ⎓ 4.5A, 9400mAh / 47Wh

RAVPower Prime 16750mAh 22W 2-Port Power Bank

Model: RP-PB19

User Guide

(9850mAh/49.25Wh)

(9700mAh/48.5Wh)

(9850mAh/49.25Wh)

(9700mAh/48.5Wh)

(9850mAh/49.25Wh)

(9700mAh/48.5Wh)

(9850mAh/49.25Wh)

(9700mAh/48.5Wh)

(9850mAh/49.25Wh)

(9700mAh/48.5Wh)

(9850mAh/49.25Wh)

(9700mAh/48.5Wh)

www.ravpower.com

ASIA PACIFIC

E-mail: [e-mail](JP)
JP Importer: 株式会社SUNVALLEY JAPAN
Address: 〒104-0032 東京都中央区八丁堀3丁目18-6 PMO京橋東9F

EUROPE

E-mail:
[e-mail](UK)
[e-mail](DE)
[e-mail](FR)
[e-mail](ES)
[e-mail](IT)
EU Importer : ZBT International Trading GmbH
Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland

NORTH AMERICA

E-mail: [e-mail](US)
[e-mail](CA)
Tel: [phone] (Mon-Fri: 9:00-17:00 PST)
US Distributor: SUNVALLEYTEK INTERNATIONAL INC.
Address: 46724 Lakeview Blvd, Fremont, CA 94538

MANUFACTURER

Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129

RP-PB19_V3.5MADE IN CHINA

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using this product, basic precautions should always be followed,
including thefollowing:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the product is used near
children.
c) Do not put ngers or hands into the product.
d) Do not expose power bank to rain or snow.
e) Use of a power supply or charger not recommended or sold by power pack manufacturer
may result in a risk of re or injury to persons.
f) Do not use the power bank in excess of its output rating. Overload outputs above rating
may result in a risk of re or injury to persons.
g) Do not use the power bank that is damaged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re, explosion or risk of injury.
h) Do not disassemble the power bank. Take it to a qualied service person when service or
repair is required. Incorrect reassembly may result in a risk of re or injury to persons.
i) Do not expose a power pack to re or excessive temperature. Exposure to re or
temperature above 100°C may cause explosion. The temperature of 100°C can be replaced
by the temperature of 212°F.
j) Have servicing performed by a qualied repair person using only identical replacement
parts. This will ensure that the safety of the product is maintained.

k) Switch o the power bank when not in use.

SAVE THESE INSTRUCTIONS

FCC Compliance

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must withstand any
interference received, including interference that may cause undesired operation.

WEEE Compliance

DO not to dispose of product as unsorted municipal waste and to collect such WEEE
separately, for proper treatment, recovery and recycling, please take this product(s) to
designated collection points where it will be accepted free of charge. Please contact your
local authority for further details of your nearest designated collection station.