RAVE Sports Slidewalk User Manual

Aqua Attachments
Owner’s Manual
www.ravesports.com
Table of Contents
Introduction ......................................................................................... 2
Safety rules and information ............................................................. 3
Inflation valve operation ................................................................... 5
Assembling your Slide ......................................................................... 6
Assembling your Log ........................................................................ 13
Assembling your Launch ................................................................. 15
Assembling your Slidewalk ............................................................. 17
Cleaning and storage ....................................................................... 19
Repairs ............................................................................................... 20
This owner’s manual contains important safety instructions and information about how to assemble, use, and care for your product. Please read entire manual before assembling or using your product. Make sure that everyone who uses the product also receives proper supervision and understands the safety instructions and warnings in this manual. Be sure to save this owner’s manual for future reference and safety instructions for others.
Date Purchased: _________________________________
Purchased from: _________________________________
Copyright ©
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the publisher. Requests should be mailed to RAVE Sports, 3325 Labore Road, Saint Paul, Minn. 55110.
1
!!
Introduction
Thank you for purchasing a RAVE Sports Aqua Attachment. Water sports can be safe and fun for all levels of enthusiasts. This Owner’s Manual is presented to enhance your enjoyment of the sport. It is intended to alert you to some of the potentially dangerous conditions that can arise in all water sports.
Please take a few minutes to read this manual before assembling and using the product. Although the product is simple to use, this manual contains important safety information that you and all users must understand to safely enjoy the Aqua Attachments.
If you have any questions regarding this product, please call RAVE Sports at 1-800-659-0790, or visit ravesports.com. Please
have your serial number available.
W A R N I N G
UNSAFE USE OF THE AQUA JUMP CAN RESULT
IN PERSONAL INJURY OR DEATH.
To reduce the risk of injury, read and follow all
instructions and warnings in this manual. Do not
use this product unless you understand and accept
the risk of injury involved with this activity.
2
Safety Rules and Information
Read and understand all of the information contained in this
owner’s manual before assembling and using your product.
Make sure that everyone who uses the product is provided with
and understands these safety rules and information.
The Aqua Attachments are designed to be used only while
secured to the Classic Aqua Jump® or the Aqua Jump Eclipse in large bodies of water with depths of at least 10 feet of water. Do not use or allow anyone else to use the product on land or any other hard surface or in swimming pools.
Choose a location for your product that is most protected from
wind, of sufficient water depth, and free of obstructions.
Always anchor the Aqua Jump Eclipse securely before it is used.
Always make sure the Aqua Attachments are securely attached
to the Aqua Jump Eclipse before using.
Always wear a U.S. Coast Guard approved Type III (PFD) vest
when using the products.
Never use the product after sunset, before dawn, or any other
time in poor lighting conditions.
Never use the product in rough surface water conditions,
during storms, or when there is lightning. If an unexpected storm arises while using the product, seek shelter on shore. Do not stay on the product.
Never use the product under the influence of alcohol or drugs.
Always stay under control while using the product.
Never swim or play under or around the Aqua Attachments.
Never dive off of or slide down the Aqua Attachments head
first. If you choose to jump off any of the products, always enter the water feet first.
3
Never use the product while tired or fatigued. Use extreme
caution while swimming between the shore and the product. Do not attempt to swim this distance if you are tired or fatigued.
Always inspect the areas around and under the product before
each use to ensure the water is deep enough and free of all rocks, logs, sand bars, and underwater obstructions and that the product is a safe distance from above water hard objects. Ask about local water conditions before using the product in unfamiliar water.
When not in use, secure the product against unauthorized or
unsupervised use.
Inspect your product for any worn, defective, or missing parts.
Do not attempt flips, somersaults or other acrobatic maneuvers
on the product. Most debilitating spinal cord injuries that occur during trampoline use involve somersaults. Improper landing during a somersault produces serious risk of broken bones, cuts, nerve damage, spinal cord or brain injury, or death.
Use the Aqua Attachments only under mature, knowledgeable
adult supervision.
Not recommended for children under the age of six.
4
OPEN
CLOSE
Adaptor
Coupler
Inflating any RAVE Aqua Attachment
We highly recommend using the RAVE High Speed Inflator/Deflator. It will provide rapid inflation/deflation and will achieve optimum air pressure in your RAVE product. (Part # 01083 not included).
To lock open valve, depress the stem and rotate ¼ turn clockwise. To close valve, depress the stem and rotate ¼ turn counter-clockwise. The valve stem should be in the depressed position while inflating. Replace cap on valve after inflation to ensure air tight seal.
If you are using the RAVE Sports High Speed Inflator (Part #01083), simply lock the adaptor onto the end of the inflation hose and insert into the valve body. Turn ¼ turn to lock in place.
NOTE: This inflation adaptor will automatically open the valve when inserted and will close the valve when removed. You do not need to manually open/close the valve when using this special adaptor.
If you will be using a shop vacuum or other inflation device with a larger nozzle, use the 1-¼” diameter coupler (included) between the valve adaptor and the hose of your inflator. Make sure
the hose is attached to the blower port of the vacuum for inflation. Insert the adapter into the air valve and lock into place by turning clockwise.
5
C A U T I O N
DO NOT USE AN AIR COMPRESSOR TO INFLATE ANY AQUA
!!
ATTACHMENT. USE OF AN AIR COMPRESSOR MAY CAUSE OVER­INFLATION, WHICH CAN DAMAGE OR RUPTURE SEAMS.
IMPORTANT:
It is normal for the air pressure within air filled tubes to fluctuate depending on air and water temperatures. It may be necessary to increase or decrease the air pressure in your product accordingly. To avoid damage on extremely hot days it may be necessary to check and release the air pressure from your product throughout the day.
AQUA SLIDE ASSEMBLY INSTRUCTIONS
Aqua Slide™
Step 1
Lay the Slide cover on a flat surface. Make sure there are no sharp objects under the product that might puncture the tubes. Both tubes are identical. Orient the tubes between the straps and the cover with the tube seams facing upward. Insert so the long leg of the tube is positioned in the long section of the cover.
Step 2
Inflate both tubes approximately 50% full. Adjust tubes so the seams of both tubes are face up and the ends of the tubes line up with each other and the cover. Alternate inflating each tube until fully
6
Buckle
inflated. Check alignment of tubes and fit of cover periodically during inflation. If tubes are not aligned properly, release some air and move tubes to align.
When properly inflated and assembled, the tubes on the underside of the Aqua Slide should be level with each other and the cover should be straight and taught as shown.
Connecting to your Water Trampoline
To attach Slide to Classic Aqua Jump™ (with steel frame), see p. 7
To attach Slide to Aqua Jump™ Eclipse (without steel frame), see p. 8
To attach Slide to Aqua Deck™, see p. 10
To attach Slide to Bongo™, see p. 10
Attaching the Aqua Slide to Classic Aqua Jump™
(Models AJ10, AJ15, AJ20, AJ25, with steel trampoline frame)
Step 3
Determine the preferred location for the Slide on the Aqua Jump. Wrap the two straps around the inflated tube near each inside corner of the desired panel location. Properly positioned, both attachment straps
for the Slide will be on the same colored panel and running parallel with each other on the Aqua Jump tube.
IMPORTANT: Rotate the strap around the tube until the buckle is located just below the bar towards the inside of the tube. Insert the end of the strap into the
7
Loading...
+ 16 hidden pages