Ravenol VPD SAE 5W-40 Product Information [de]

- Certificate / Product Information -

RAVENOL VPD SAE 5W-40

Diesel-Synthetic

Pumpe-Düse

RAVENOL VPD SAE 5W-40 is a high performance synthetic mid SAPS low friction oil with CleanSynto® technology based on the most modern synthesis technology, which

was especially developed for engines of the new TDI generation. It is suitable for passenger cars diesel engines with and without turbocharging and direct injection are used.

RAVENOL VPD SAE 5W-40 ensures minimized friction, wear and fuel consumption and excellent cold start characteristics. Extendes oil change intervals according to manufacturer’s recommendation.

RAVENOL VPD SAE 5W-40 guarantees operational safety for all driving conditions, such as extreme stop and go traffic as well as high speed highway trips.

RAVENOL VPD SAE 5W-40 is recommended for VW diesel engines with “Pumpe-Düse-System” according to VW 505 01.

Application Notes

RAVENOL VPD SAE 5W-40 is recommended for VW diesel engines with “Pumpe-Düse-System” according to VW 505 01.

Quality Classifications

Specifications

API SM/CF, ACEA C3

Approvals

VW 505 00 / 505 01, VW 502 00

Practice and tested in aggregates with filling

MB 229.51, Ford WSS-M2C917-A, BMW Longlife-04, Porsche, Fiat 9.55535-GH2, Chrysler MS-11116, MS-11106

Characteristic

RAVENOL VPD SAE 5W-40 offers:

Recommendation for VW diesel engines with “Pumpe-Düse-System” according to VW 505 01 MID SAPS = reduced sulfated ash, phosphorus and sulfur Fastest lubrication time and fastest time filling of the bucket tappet that means no cold start rattling Respectively cold start corrosion Highest wear protection at all flexible parts like valve actuating device, camshaft and piston rings even under permanent full load trips No deposits in combustion chambers in the piston ring zone, and on valves by a solid product. Neutrality towards sealing materials.

Characteristics Unit Data Audit Density at 20°C kg/m³ 848,0 EN ISO 12185 Colour yellow brown visual Viscosity at 100°C mm²/s 13,8 DIN 51 562 Viscosity at 40°C mm²/s 83 DIN 51 562 Viscosity index VI 171 DIN ISO 2909 HTHS at 150°C mP?*s 3,75 ASTM D5481 CCS Viscosity at -30°C mPa*s 5500 ASTM D5293 Low Temp. Pumping viscosity (MRV) at

-40°C Pourpoint °C -39 DIN ISO 3016 Noack Volatility % M/M 8,7 ASTM D5800/b Flash point °C 242 DIN ISO 2592 TBN mg KOH/g 7,7 ASTM D2896 Sulphated ash %wt. 0,7 DIN 51 575

mPa*s 21.050 ASTM D4684

All indicated data are approximate values and are subject to the commercial fluctuations.

All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.

27.02.2019

Ravensberger Schmierstoffvertrieb GmbH Postfach 1163 33819 Werther Tel.: 05203/9719-0 Fax.: 052039719-40 / 41