- Certificate / Product Information -
RAVENOL VMP SAE 5W-30
RAVENOL VMP SAE 5W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for
passenger car petrol and diesel engines with and without turbo-charging and direct injection. Minimises friction, wear and fuel consumption with excellent cold start
characteristics. Suitable for extended oil change intervals where recommended by manufacturer.
RAVENOL VMP SAE 5W-30 is based on additives with reduced ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start
characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. Developed for fuel economy and energy conserving in
EURO IV and EURO V Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL VMP SAE 5W-30 achieved by its formulation with special base oils a high viscosity index. The excellent cold start behaviour ensures a optimal lubrication safety in
the cold running phase.
Due to a significant fuel economy RAVENOL VMP SAE 5W-30 contributes by reduction of emissions to conservation the environment. Minimal wear extends the lifespan of
the engine.
Application Notes
RAVENOL VMP SAE 5W-30 is a universal fuel economy, especially collected engine oil for modern gasoline and diesel engines with and without turbo charger in passenger
cars and vans with extended oil change intervals. Extend the lifespan of the particle filter. Due to the specific composition is RAVENOL VMP SAE 5W-30 excellent suitable
for use for several of the latest OEM requirements.
Specifications
ACEA C3, API SN
Approvals
BMW Longlife-04, VW 504 00 / 507 00 (for Europe and Northamerica), MB-Approval 229.51, Porsche C30 (currently valid for PORSCHE Diesel cars, Cayenne V6 and all
PORSCHE Hybrid cars)
Practice and tested in aggregates with filling
MB 229.31, Fiat 9.55535-S1, Audi/Volkswagen G 052 195 M2, G 052 195 M4, G 052 195 M6, BMW 83 21 0 398 507, BMW/Mini 83 21 0 398 508, Mercedes Benz 000 989
89 01 10, Audi Motorsport V31 748 026, Chrysler MS-11116, MS-11106
Characteristic
RAVENOL VMP SAE 5W-30 offers:
Fuel economy in part and full power operation
MID SAPS = reduced Sulphated ash, Phosphor and Sulfur
Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine
Excellent cold starting characteristics also at low temperatures
A safe lubricant film at high operating temperatures
Low evaporative tendency, so lower oil consumption
No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned
Neutrality towards sealing materials
Extended oil change intervals to protect natural resources
Characteristics Unit Data Audit
Density at 20°C kg/m³ 852 EN ISO 12185
Colour mid brown visual
Viscosity at 100°C mm²/s 11,5 DIN 51 562
Viscosity at 40°C mm²/s 68,2 DIN 51 562
Viscosity index VI 164 DIN ISO 2909
HTHS at 150°C mP?*s 3,6 ASTM D5481
CCS Viscosity at -30°C mPa*s 4230 ASTM D5293
Low Temp. Pumping viscosity (MRV) at
-35°C
Pourpoint °C -60 DIN ISO 3016
Noack Volatility % M/M 7,2 ASTM D5800/b
Flash point °C 238 DIN ISO 2592
TBN mg KOH/g 6,6 ASTM D2896
Sulphated ash %wt. 0,7 DIN 51 575
All indicated data are approximate values and are subject to the commercial fluctuations.
All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references
mPa*s 13.200 ASTM D4684
made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.
27.02.2019
Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: 05203/9719-0
Fax.: 052039719-40 / 41
Powered by TCPDF (www.tcpdf.org)
Loading...