Ravenol SSV SAE 0W-30 Product Information

- Certificate / Product Information -

RAVENOL SSV SAE 0W-30

RAVENOL SSV Fuel Economy SAE 0W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto®

technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.

RAVENOL SSV Fuel Economy SAE 0W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

With its new formulation, RAVENOL SSV Fuel Economy SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from
corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.

By significantly reducing fuel consumption, RAVENOL SSV Fuel Economy SAE 0W-30 helps to protect the environment by reducing emissions.

Extended oil change intervals according to the manufacturer’s instructions.

Application Notes

RAVENOL SSV FUEL ECONOMY SAE 0W-30 is universal, fuel-efficient engine oil. It is a premium product for gasoline and diesel engine passenger cars. Suitable for all

petrol and diesel passenger cars with and without turbo charger, especially recommended for full synthetic all-season motor oils.

Specifications

API SL, ACEA A5/B5

Approvals

VOLVO VCC 95200377, MB-Freigabe 229.6

Practice and tested in aggregates with filling

MB 229.6

Characteristic

RAVENOL SSV FUEL ECONOMY SAE 0W-30 offers:

universal application in all modern petrol and diesel engines
quick lubrication of the engine even at temperatures below -30 °C
low evaporation tendency, therefore a lower oil consumption
safety against accumulation of sludge, coking and corrosion even under unfavourable operating conditions
guarantee of the function of the hydro tappets at all temperatures
no oil limited deposits in combustion chambers, at the piston ring and valves
unchanged viscosity during the whole oil change interval, high viscosity index
neutral against sealing materials
Miscibility with all commercially available engine oils. Flushing is not required.

Characteristics Unit Data Audit
Density at 20°C kg/m³ 838,0 EN ISO 12185
Colour brown visual
Viscosity at 100°C mm²/s 9,7 DIN 51 562
Viscosity at 40°C mm²/s 52,9 DIN 51 562
Viscosity index VI 172 DIN ISO 2909
HTHS at 150°C mP?*s 2,97 ASTM D5481
CCS Viscosity at -35°C mPa*s 4610 ASTM D5293
Low Temp. Pumping viscosity (MRV) at

-40°C
Pourpoint °C -57 DIN ISO 3016
Noack Volatility % M/M 8,1 ASTM D5800/b
Flash point °C 234 DIN ISO 2592
TBN mg KOH/g 9,7 ASTM D2896
Sulphated ash %wt. 1,2 DIN 51 575

All indicated data are approximate values and are subject to the commercial fluctuations.

All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references
made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.

31.01.2019

mPa*s 16.300 ASTM D4684

Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: [phone]
Fax.: [phone] / 41

Powered by TCPDF (www.tcpdf.org)