Ravenol HPS SAE 5W-30 Product Information

- Certificate / Product Information -

RAVENOL HPS SAE 5W-30

HyperSynth

RAVENOL HPS SAE 5W-30 is modern high performance low friction semi-synthetic multigrade motor oil, which is suitable for performance motors because of its synthetic

components and innovative additives. The excellent cold start characteristics provide optimal lubricant safety in the cold-running phase. Because of the noticeable fuel
economy contributes RAVENOL HPS SAE 5W-30 the reduction of pollutant emissions and protects the environment.

Application Notes

RAVENOL HPS SAE 5W-30 is low friction motor oil, which is suitable for performance motors. It is recommended for all modern passenger car gasoline and diesel engines,

including turbo versions and for direct injection motors and also recommended for all operation conditions.

Quality Classifications

RAVENOL HPS SAE 5W-30 is approved, tried and tested for aggregates specifying:

Specifications

API SL/CF, ACEA A3/B4

Practice and tested in aggregates with filling

MB 229.3, BMW Longlife-98, VW 502 00/505 00

Characteristic

RAVENOL HPS SAE 5W-30 offers:

Fuel economy in part and full power operation
Very stable and excellent viscosity behaviour
Excellent shear stability
Excellent cold starting characteristics
A safe lubricant film at high operating temperatures
Excellent detergent- and dispersant characteristics
High wear and corrosion protection, high oxidation stability
Prevention of sludge formation
Extended lifetime because of oxidation stability
Suitable for catalysts

Characteristics Unit Data Audit
Density at 20°C kg/m³ 852 EN ISO 12185
Colour gelbbraun visual
Viscosity at 100°C mm²/s 12,15 DIN 51 562
Viscosity at 40°C mm²/s 70,9 DIN 51 562
Viscosity index VI 170 DIN ISO 2909
HTHS at 150°C mP?*s 3,54 ASTM D5481
CCS Viscosity at -30°C mPa*s 6140 ASTM D5293
Low Temp. Pumping viscosity (MRV) at

-35°C
Pourpoint °C -39 DIN ISO 3016
Noack Volatility % M/M 8,9 ASTM D5800/b
Flash point (COC) °C 242 DIN ISO 2592
TBN mg KOH/g 11,0 ASTM D2896
Sulphated ash %wt. 1,18 DIN 51 575

mPa*s 16.200 ASTM D4684

All indicated data are approximate values and are subject to the commercial fluctuations.

All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references
made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.

19.10.2018

Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: [phone]
Fax.: [phone] / 41

Powered by TCPDF (www.tcpdf.org)