Ravenol FDS SAE 5W-30 Product Information

- Certificate / Product Information -

RAVENOL FDS SAE 5W-30

RAVENOL FDS SAE 5W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger

car petrol and diesel engines with and without turbo-charging and direct injection.

Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them.
This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses
during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the
engine clean and efficient.

RAVENOL FDS SAE 5W-30 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving
mechanical efficiency.

With its new formulation, RAVENOL FDS SAE 5W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil
through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.

By significantly reducing fuel consumption, RAVENOL FDS SAE 5W-30 helps to protect the environment by reducing emissions.

RAVENOL FDS SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL FDS SAE 5W-30 ensures operational safety in all driving conditions such as in extreme stop-and-go traffic and high-speed motorway driving.

Extended oil change intervals according to the manufacturer’s instructions.

Application Notes

RAVENOL FDS SAE 5W-30 is suitable as motor oil for fuel-efficient year-round use in modern petrol and diesel engines in passenger cars, station wagon's, vans and similar

vehicles from FORD and RENAULT,Toyota, Hyundai, Kia, Mazda, Honda, Nissan, Mitsubishi when the given specifications ACEA A5/B5 are required.

Specifications

API SL/CF, ACEA A1/B1, C5, ACEA A5/B5, Lizensiert: API SL

Approvals

RENAULT RN0700, FORD WSS-M2C913-D, JAGUAR LAND ROVER STJLR.03.5003, MB-Freigabe 229.6

Practice and tested in aggregates with filling

Ford WSS-M2C913-C, Fiat 9.55535-G1, MB 229.6

Characteristic

RAVENOL FDS SAE 5W-30 offers:

Excellent cold starting properties even at low temperatures of below -30 ° C
A very stable and excellent viscosity characteristics, shear stability
Fuel efficiency under all operating conditions
Excellent detergency and dispersing properties
neutrality towards sealing materials
Low evaporation loss, thereby lower oil consumption
An extensive protection against wear, corrosion and foaming
Catalyst suitability
Extended oil change intervals to protect natural resources

Characteristics Unit Data Audit
Density at 20°C kg/m³ 843 EN ISO 12185
Colour brown visual
Viscosity at 100°C mm²/s 10,2 DIN 51 562
Viscosity at 40°C mm²/s 58,35 DIN 51 562
Viscosity index VI 163 DIN ISO 2909
HTHS at 150°C mP?*s 3,0 ASTM D5481
Viscosity at –30°C mPa.s 3880 ASTM D5293
Low Temp. Pumping viscosity -35°C
(MRV)
Pourpoint °C -51 DIN ISO 3016
Noack Volatility % M/M 8,9 ASTM D5800/b
Flash point (COC) °C 228 DIN ISO 2592
TBN mg KOH/g 10,1 ASTM D2896
Sulphated ash %wt. 1,2 DIN 51 575

mPa*s 14.800 ASTM D 4684

All indicated data are approximate values and are subject to the commercial fluctuations.

All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references
made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.

20.02.2019

Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: [phone]
Fax.: [phone] / 41

Powered by TCPDF (www.tcpdf.org)