Ravenol DXG SAE 5W-30 Product Information

- Certificate / Product Information -

RAVENOL DXG SAE 5W-30

RAVENOL DXG SAE 5W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for

passenger car petrol engines with and without turbo-charging and direct injection.

For the development of RAVENOL DXG SAE 5W-30 the proven formulation of tri-nuclear molybdenum, tungsten and OFM (Organic Friction Modifiers) was used. A highly
polar Group V base oil was used in this formula, which has good compatibility with the PAO used.

Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them.
This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses
during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the
engine clean and efficient.

RAVENOL DXG SAE 5W-30 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving
mechanical efficiency.

With its new formulation, RAVENOL DXG SAE 5W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil
through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By significantly reducing fuel consumption, RAVENOL DXG SAE 5W-30 helps to protect the environment by reducing emissions.
RAVENOL DXG SAE 5W-30 helps to avoid low speed pre-ignition LSPI (Low Speed ??Pre-ignition). This can help avoid engine damage.
Extended oil change intervals according to the manufacturer’s instructions.

Application Notes

RAVENOL DXG SAE 5W-30 is a high-performance low-friction engine oil for modern engines, and is recommended by OPEL/GENERAL MOTORS to the latest GM dexos 1

specification for modern GM gasoline-engined vehicles under all operating conditions.

RAVENOL DXG SAE 5W-30 is also suitable fort he shown specifications of Ford, Chrysler and Honda.

Specifications

API SN Plus, API SN (RC), ILSAC GF-5

Approvals

GM dexos1™ Gen 2 (License No. D10709HK081)

Practice and tested in aggregates with filling

Ford WSS-M2C946-A/-B1, Ford WSS-M2C929-A, Chrysler MS-6395, Honda/Acura HTO-06, Fiat 9.55535-CR1

Characteristic

RAVENOL DXG SAE 5W-30 offers:

New formula with dexos1™ Gen 2 approval
Special molybdenum and tungsten additive formula to smooth the engine surfaces
Particularly suitable for GDI engines
Avoids low speed pre-ignition (LSPI)
No oil-related deposits in combustion chambers, in the piston ring zone and on valves
Fuel savings potential under both part and full load operation
Latest low SAPS technology = low Sulphated Ash, Phosphorus and Sulphur
A very stable viscosity behavior and an excellent shear stability
Very good cold starting properties
A safe lubricant film even at very high operating temperatures
Exceptional wear and corrosion protection
Excellent detergent and dispersant capabilities for cleaner engines, prevents foaming
Long service life through high oxidation stability
Suitable for catalyst-equipped vehicles

Characteristics Unit Data Audit
Density at 20°C kg/m³ 846,0 EN ISO 12185
Colour brown visual
Viscosity at 100°C mm²/s 10,7 DIN 51 562
Viscosity at 40°C mm²/s 63,3 DIN 51562
Viscosity index VI 160 DIN ISO 2909
HTHS Viscosity mPa*s 3,1 ASTM D5481
CCS Viscosity at -30°C mPa*s 3990 ASTM D5293
Low Temp. Pumping viscosity -35°C
(MRV)
Pourpoint °C -57 DIN ISO 3016
Noack Volatility % M/M 6,0 ASTM D5800/a
Flash point (COC) °C 256 DIN ISO 2592

mPa*s 11.800 ASTM D 4684

Characteristics Unit Data Audit
TBN mg KOH/g 8,3 DIN ISO 3771
Sulphated ash %wt. 0,77 DIN 51 575

All indicated data are approximate values and are subject to the commercial fluctuations.

All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references
made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.

20.02.2019

Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: [phone]
Fax.: [phone] / 41

Powered by TCPDF (www.tcpdf.org)