Raven E1008500 User Manual

Wi-Fi Bridge

Setup / Operation Guide

iPhone™ and iPod™ touch functionality
only.

www.adjustablesbyleggett.com 993011XX EDR11XXX 10/09

Table of Contents

Before Beginning ........................................................................ 4

Prodigy™ Wi-Fi Bridge Receiver Installation .............................. 5

Prodigy™ Bridge Application Setup ........................................... 7

Prodigy™ Position Screen .......................................................... 11

Prodigy™ Massage Screen ........................................................ 12

Prodigy™ Presets Screen ........................................................... 13

Prodigy™ Sleep Timer Screen ................................................... 14

Prodigy™ More Screen .............................................................. 15

Prodigy™ Gentle Wake Alarm Screen ....................................... 16

Prodigy™ Diagnostics Screen .................................................... 17

Changes or modifications not expressively
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.

Copyright © 2009 Leggett & Platt, Inc.

FCC DISCLAIMER

Before Beginning

STEP 1

Before beginning Prodigy™ Wi-Fi Bridge setup, be sure you
have uploaded the Prodigy Bridge App. to your iPhone™ or
iPod™ touch (FIGURE 1). Go to . . .

FIGURE 1: Home screen with Prodigy™ Bridge App.

4 Prodigy™ Wi-Fi Bridge Setup / Operation Guide 993011XX

Prodigy™ Wi-Fi Bridge Receiver Installation

STEP 2

Locate the Prodigy™ Wi-Fi Bridge receiver and electrical power
cord (FIGURE 2).

WI-FI BRIDGE
RECEIVER

TRANSMISSION
LIGHT

FIGURE 2: Prodigy™ Wi-Fi Bridge receiver and electrical power cord.

ACTIVATE
BUTTON

ELECTRICAL
POWER CORD

Prodigy™ Wi-Fi Bridge Setup / Operation Guide 993011XX 5

Prodigy™ Wi-Fi Bridge Receiver Installation

STEP 3

Insert the power cord into the Prodigy™ Wi-Fi Bridge receiver,
then plug into electrical power source (electrical surge
protection device recommended, not included) (FIGURE 3).

WI-FI BRIDGE
RECEIVER

ELECTRICAL
POWER CORD

TRANSMISSION
LIGHT

FIGURE 3: Prodigy™ Wi-Fi Bridge receiver power cord installation

and activation button location.

ACTIVATE
BUTTON

STEP 4

Press the activate button on the Prodigy™ Wi-Fi Bridge receiver for (1)
second, then press the learn button on the Prodigy™ adjustable base
power down box for (1) second (FIGURES 3 and 4). The transmission
light on both receiver boxes will flash on-and-off in succession
indicating communication. NOTE: The Prodigy™ Wi-Fi Bridge receiver
must be in the same general location as the power down box.

POWER
DOWN BOX

LEARN

TRANSMISSION
LIGHT

BUTTON

FIGURE 4: Power down box learn button location.

6 Prodigy™ Wi-Fi Bridge Setup / Operation Guide 993011XX