Rapoo Technology M6097G Users Manual

Quick Start Guide of

2.4GHz Wireless Media Remote Mouse

Installation

battery, this mouse can operate

with single battery, install two battery

can double the use time. turn on the

mouse, a REDbattery icon on the left

side of mouse will light On and flash 10s.

of your mouse. Insert the CD into your computer’s CD-ROM

1. plug the Micro receiver into a USB port of your computer

2. Open the battery door and install

drive and follow on-screen instructions.

3. Install Software to take all advantage

Mouse buttons functions under Media Remote mode

Trouble Shooting

1. Check Micro receiver connection; try to inserting Micro

switch on the bottom of the mouse

ON/OFF the mouse

1. You can switch On or shut off the mouse by use the On/OFF

2. The Low battery indicator will flash 10s when the mouse is

P/N: 266-80971-0000

Receiver to another USB port on your computer.

Re-insert the Micro Receiver. Take out the battery and

reinstall it.

2. Connection between the mouse and the Micro Receiver.

Scrolling Side-to-side

You can scroll side-to-side by tilting the wheel left or right. This

feature is especially useful in spread sheets or viewing large-size

images.

Zoom In and Zoom Out

You can use the two extra button on left size of the mouse to

zoom in and zoom out your document.

To use this function, you need to install the CD Driver.

Universal Back / Forward

Use the back button to access previous page and use the forward

button to access next page.

Media Remote Control Mode

Press the CPI button for over 3 seconds to enter Media Remote

control Mode. the battery icon will fast flash 3 seconds when you

successful change mouse mode.

In Media Remote control mode. the mouse button and scroll will

change to following function to let you remote control your PC’s

media player

Press the CPI button for over 3 seconds again and you will back

to Normal Mode.

turned on. If the battery icon keep flash during your using.

The battery need to be replaced.

Mouse Functions

Cursor Speed control

Press the CPI button and you can toggle the CPI between 800

CPI and 1600 CPI (Laser Version, Optical is between 500 CPI

and 1000 CPI)