RAPID RELEASE PRO2
USER’S MANUAL
Rapid Release is a Trademark of Rapid Release Technology LLC, all rights reserved.
www.RapidReleaseTech.com | (949) 415-4778
10-008 Rev 5 02/28/17
10-008 Rev 5 02/28/17
INTRODUCTION ........................................................................................ 1
INTENDED USE ......................................................................................... 1
IMPORTANT SAFETY INSTRUCTIONS ..................................................... 1
DANGERS AND PRECAUTIONS ............................................................... 1
RAPID RELEASE PRO2 PRECAUTIONS .................................................... 2
RAPID RELEASE PRO2 COMPONENTS ................................................... 2
CONTRAINDICATIONS OR WHEN NOT TO USE .................................... 3
VOLTAGE ................................................................................................... 3
MAINTENANCE AND CARE OF YOUR
RAPID RELEASE PRO2 MASSAGER .......................................................... 4
BASIC USAGE INSTRUCTIONS ................................................................. 4
FOLLOW UP SESSIONS ............................................................................ 5
GENERAL GUIDELINES ............................................................................. 5
SPECIFICATIONS ....................................................................................... 5
RAPID RELEASE TECHNOLOGY® LIMITED WARRANTY ......................... 6
CONTENTS
10-008 Rev 5 02/28/17
10-008 Rev 5 02/28/17
1
INTRODUCTION
Before operating your Rapid Release Pro2 please read this user
manual to familiarize yourself with operating precautions
and guidelines.
Thank you for your purchase of the Rapid Release Technology Pro2,
a breakthrough in vibration therapy!
The Rapid Release Pro2 is a non-invasive approach to treating minor
aches and pains, and relaxing muscles.
INTENDED USE
The Rapid Release Pro2 is intended for relaxing muscles and relieving
minor aches and pains.
IMPORTANT SAFETY INSTRUCTIONS
DANGERS AND PRECAUTIONS
The Rapid Release Pro2, like any other electric appliance, has the basic
precautions noted below:
• Always unplug Rapid Release Pro2 from the electrical outlet after using
and before cleaning.
• Do not use while bathing or in a shower. Keep away from water and
other liquids.
• Do not place Rapid Release Pro2 where it can fall into a bath tub
or sink.
• Do not touch if appliance has fallen into water! Unplug immediately.
To reduce the risk of burns, re, electric shock, injury or death:
• Plug into polarized outlets only (one opening is bigger than the other).
• Unplug Rapid Release Pro2 from outlet when not in use and before
cleaning. Never leave unattended when plugged in.
• Never operate Rapid Release Pro2 if the cord or plug is damaged, if it
is not working properly, has been dropped, damaged, or immersed in
water. Contact the factory for inspection and repair.
• Do not operate under blankets, towels, clothing etc. or anyplace where
ventilation is limited.
• Careful supervision is necessary when used on, by or near children,
immobile or disabled individuals.
10-008 Rev 5 02/28/17
2
RAPID RELEASE PRO2 PRECAUTIONS
Use Rapid Release Pro2 only for its intended purpose, as described in
this manual. Do not use attachments not made by the manufacturer.
• Always use caution when using your Rapid Release Pro2.
For example, if your Pro2 is ever dropped, carefully inspect the
device before using it or return it to Rapid Release Technology for a
no-charge evaluation.
• Keep the initial session brief, so you can see how the body responds
to high speed vibration.
• Do not carry or pull Rapid Release Pro2 by the cord sharply. Don’t
insert any object into the Rapid Release Pro2 openings.
• Never block ventilation openings. Keep the openings free of lint,
hair, and loose jewelry.
• Do not place the cord on heated surfaces.
• Do not operate where aerosol products or oxygen are being used
or administered.
RAPID RELEASE PRO 2 COMPONENTS
Treatment Cap
For soothing and
gentle application
Soft Tip
For use over
bony areas
Large Tip
Useful for most
applications
Large Treatment Areas
For large muscle groups
The Actuator
Useful to apply vibration
to a very small area
Rapid Release Pro2
10-008 Rev 5 02/28/17
3
CONTRAINDICATIONS OR WHEN NOT TO USE
THESE CONTRAINDICATIONS ARE FOR ELECTRIC MASSAGERS
INCLUDING YOUR RAPID RELEASE PRO2.
Do not apply during pregnancy.
Do not apply to persons with pacemaker or debrillators.
Do not apply over implanted plates or screws.
Do not use over any open wound or incision.
Do not apply the Large Treatment Tip or actuator heads over
bony surfaces.
Do not use if you or a family member have a history of Deep Vein
Thrombosis (DVT) or areas with blood clots.
Do not apply to bruises, open wounds, tumors or cancer.
Do not use if you have a disease/s that deep vibration is not recommended.
If you have any doubts or questions about appropriateness of use, please
consult your health professional.
Stop session if irritation, swelling, excessive redness or pain increases.
Do not apply directly to any area that has signs of inammation.
WARNING: This device should not be used over swollen or inamed areas
or skin eruptions. Do not use in the presence of unexplained calf pain.
Consult a physician.
The Rapid Release Pro2 is not intended for adjusting or manipulating
bones or joints of the body.
VOLTAGE
The Rapid Release Pro2 is available in two models: 110/120 volt model or
220/240 volt model.
Use the proper Voltage. Do not plug a 120V Rapid Release Pro2 into a
240V plug and vice versa. If you do need to use your Rapid Release Pro2
with a dierent voltage, you must use a transformer to change
the voltage.
This transformer must be rated at 300 Watts or higher and typically weigh
about 5lbs (2 KG). Using plug adapters or transformers rated less than
300 Watts will destroy your Rapid Release Pro2 and will void the
warranty. If you have any questions about this, please contact us at
support@rapidreleasetech.com before you plug it in.
The product specication label will state the operating voltage of
your device.
10-008 Rev 5 02/28/17
4
MAINTENANCE AND CARE
OF YOUR RAPID RELEASE PRO2 MASSAGER
Clean your Rapid Release Pro2 with premoistened wipes. Do not use
solvents such as benzene, paint thinner, or acetone.
Your Rapid Release Pro 2 is made from the highest quality ABS,
polycarbonate and polymer plastics. Please do not use massage oils or
lotions that contain aromatic oils as they can cause deterioration of the
plastic and power cord rubber, damaging your Rapid Release Pro2 device.
Do not store or place Rapid Release Pro2 where it can drop or fall
into water.
Do not use continuously for more than 10 minutes. Please allow it to
cool o 5–10 minutes before the next use.
BASIC USAGE INSTRUCTIONS
Session time is typically 2 to 5 minutes.
1. Turn on by pushing gray switch on the rear of the Rapid Release Pro2
to the Right.
2. Use a grip that is comfortable to you, making sure that you are not
obstructing the air vents.
3. Rotate the Rapid Release Pro2 so the desired treatment head is in
contact with the body.
4. When using for the rst time on somebody, ask them to hold out
their hand with palm up and apply Rapid Release Pro2 to conrm it is
acceptable to them.
5. Applying pressure is not needed or recommended. Let the weight of
the Rapid Release Pro2 do the work for you.
6. Keep the device moving about 1 inch per second in a circular or
zig zag motion.
7. The Rapid Release Pro2 can be used on skin or clothing.
8. Do not pull or tug on the power cord. Doing so could damage the cord
or cause a power disconnect where the cord connects at the base of
the Rapid Release Pro2. This may void your warranty.
9. It is normal for the green disk to become warm to the touch. Like any
mechanical device, while in use, it is normal for the areas near the
ventilation slots to become warm. If this area becomes hot, turn the
machine o and let it cool o for ten minutes before using it again.
10. Please visit RapidReleaseTech.com for more information.
10-008 Rev 5 02/28/17
5
FOLLOW UP SESSIONS
During follow up sessions, treatment area should be expanded to cover
all structures linked to your target area. For example: working around the
shoulder apply the Rapid Release Pro2 down the entire arm to the ngers
and back to the upper chest and all around the shoulder blade area. After
the rst few sessions you can change position to stretch the area or target
the area from a dierent angle. You can also change the body position or
apply while weight bearing.
Remember the Rapid Release Pro2’s eectiveness derives from its unique
frequency therefore too much pressure can compress the tissue and limit
the penetration of the vibration.
GENERAL GUIDELINES
• There is no observed benet to sessions lasting longer than
5 minutes per area.
• Use common sense when using the Rapid Release Pro2.
• When in doubt, always err on the side of caution.
See our website www.RapidReleaseTech.com for updated instructions.
SPECIFICATIONS
Leakage current: none
Length: 10.5 in.
Cord Length: 9 ft.
Weight: 2.2 lbs. without cord
Weight: 2.7 lbs. with cord
Frequency: 155Hz +- 10%
10-008 Rev 5 02/28/17
6
RAPID RELEASE TECHNOLOGY®
LIMITED WARRANTY
What is covered?
All parts defective in material and workmanship.
What is not covered?
Defects that have resulted from improper or unreasonable use or maintenance,
strained power cord, accident, excess moisture, improper packing, lightning, power
surges, or unauthorized tampering, alteration or modication are not covered.
Limitation on Liability
WHERE PERMITTED, THE PROVISIONS OF THIS LIMITED WARRANTY ARE IN LIEU
OF ANY OTHER WRITTEN WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN
OR ORAL, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Notwithstanding the above, where applicable, if you qualify
as a “consumer” under the Magnuson-Moss Warranty Act, then you may be entitled
to any implied warranties allowed by law for the period of the express Limited
Warranty as set forth below. Some states do not allow limitations on how long an
implied Limited Warranty lasts, so the above limitation may not apply to you.
For how long?
This Limited Warranty lasts one year from the purchase date.
What we will do?
We will, at our sole option, repair or replace any defective parts within a reasonable
period of time and free of charge.
What we will not do?
Pay shipping or transportation charges from you to us.
What you must do to obtain Limited Warranty service.
Return product in new condition with proof of purchase directly to Rapid Release
Pro2. Contact us at: (949) 415-4778 or visit www.RapidReleaseTech.com/RMA for
specic return and shipping instructions.
Exclusive Remedy
This Limited Warranty is fully transferable provided that the current owner furnishes
the original proof of purchase. THE MAXIMUM LIABILITY OF Rapid Release Pro2
SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
IN NO EVENT SHALL Rapid Release Pro2 BE LIABLE FOR SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES. Some areas do not allow limitations on
the exclusion or limitation of relief, special, incidental, consequential or indirect
damages, or the limitation of liability to specied amounts, so the above limitations
or exclusions may not apply to you.
10-008 Rev 5 02/28/17
Manufactured for Rapid Release Technology, LLC
3621 W. MacArthur Blvd. #111 Santa Ana, CA 92704
©2013 Rapid Release Technology, LLC. All Rights Reserved.
www.RapidReleaseTech.com
Rapid Release Pro1 User Manual 10-021 Rev 3 03/22/2017
Rapid Release Pro1 User Manual
Before operating your Rapid Release Pro1 please read this user manual to familiarize yourself with operating
precautions and guidelines.
Intended Use
The Rapid Release Pro1 is intended for relaxing muscles and relieving minor aches and pains.
Important Safety Instructions
Dangers and Precautions
The Rapid Release Pro1, like any other electric appliance, has the basic precautions noted below:
• Always unplug Rapid Release Pro1 from the electrical outlet after using and before cleaning.
• Do not use while bathing or in a shower. Keep away from water and other liquids.
• Do not place Rapid Release Pro1 where it can fall into a bath tub
or sink.
• Do not touch if appliance has fallen into water! Unplug immediately.
To reduce the risk of burns, fire, electric shock, injury or death:
• Plug into polarized outlets only (one opening is bigger than the other).
• Unplug Rapid Release Pro1 from outlet when not in use and before cleaning. Never leave unattended when
plugged in.
• Never operate Rapid Release Pro1 if the cord or plug is damaged, if it is not working properly, has been dropped,
damaged, or immersed in water. Contact the factory for inspection and repair.
• Do not operate under blankets, towels, clothing etc. or anyplace where ventilation is limited.
• Careful supervision is necessary when used on, by or near children, immobile or disabled individuals.
Rapid Release PRO1 Precautions
Use Rapid Release Pro1 only for its intended purpose, as described in this manual. Do not use attachments not made
by the manufacturer.
• Always use caution when using your Rapid Release Pro1.
For example, if your Pro1 is ever dropped, carefully inspect the device before using it or return it to Rapid Release
Technology for a no-charge evaluation.
• Keep the initial session brief, so you can see how the body responds to high speed vibration.
• Do not carry or pull Rapid Release Pro1 by the cord sharply. Don’t insert any object into the Rapid Release Pro1
openings.
• Do not place the cord on heated surfaces.
• Do not operate where aerosol products or oxygen are being used
or administered.
Contraindications or when not to use
Do not apply during pregnancy.
Do not apply to persons with pacemaker or defibrillators.
Do not apply over implanted plates or screws.
Do not use over any open wound or incision.
Do not apply the Large Treatment Tip or actuator heads over
bony surfaces.
Do not use if you or a family member have a history of Deep Vein Thrombosis (DVT) or areas with blood clots.
Do not apply to bruises, open wounds, tumors or cancer.
Do not use if you have a disease/s that deep vibration is not recommended.
If you have any doubts or questions about appropriateness of use, please consult your health professional.
Stop session if irritation, swelling, excessive redness or pain increases.
Do not apply directly to any area that has signs of inflammation.
Rapid Release Pro1 User Manual 10-021 Rev 3 03/22/2017
WARNING: This device should not be used over swollen or inflamed areas or skin eruptions. Do not use in the
presence of unexplained calf pain. Consult a physician.
The Rapid Release Pro1 is not intended for adjusting or manipulating bones or joints of the body.
Maintenance and care
of your Rapid Release Pro1
Clean your Rapid Release Pro1 with premoistened wipes. Do not use solvents such as benzene, paint thinner, or
acetone.
Please do not use massage oils or lotions that contain aromatic oils as they can cause deterioration of the plastic and
power cord rubber, damaging your Rapid Release Pro1 device. Do not store or place Rapid Release Pro1 where it can
drop or fall into water.
Do not use continuously for more than 10 minutes. Please allow it to cool off 5–10 minutes before the next
use.
Basic Usage Instructions
Session time is typically 2 to 5 minutes.
1. The Blue On/Off switch is located on the top of the Pro 1. Turn on by pushing blue switch forward.
2. Use a grip that is comfortable to you, making sure that you are not obstructing the air vents.
3. Rotate the Rapid Release Pro1 so the desired treatment head is in contact with the body.
4. When using for the first time on somebody, ask them to hold out their hand with palm up and apply Rapid Release
Pro1 to confirm it is acceptable to them.
5. Applying pressure is not needed or recommended. Let the weight of the Rapid Release Pro1 do the work for you.
6. Keep the device moving about 1 inch per second in a circular or
zig zag motion.
7. The Rapid Release Pro1 can be used on skin or clothing.
8. Do not pull or tug on the power cord. Doing so could damage the cord or cause a power disconnect where the
cord connects at the base of the Rapid Release Pro1. This may void your warranty.
Follow up Sessions
During follow up sessions, treatment area should be expanded to cover all structures linked to your target area. For
example: working around the shoulder apply the Rapid Release Pro1 down the entire arm to the fingers and back to
the upper chest and all around the shoulder blade area. After the first few sessions you can change position to stretch
the area or target the area from a different angle. You can also change the body position or apply while weight
bearing.
Remember the Rapid Release Pro1’s effectiveness derives from its unique frequency therefore too much pressure can
compress the tissue and limit the penetration of the vibration.
General Guidelines
• There is no observed benefit to sessions lasting longer than
5 minutes per area.
• Use common sense when using the Rapid Release Pro1.
• When in doubt, always err on the side of caution.
Specifications
Leakage current: Less than 100 uA
Length: 10.5 in.
Cord Length: 6 ft.
Weight: 2.2 lbs. without cord
Weight: 2.5 lbs. with cord
Frequency: 165Hz +- 10%
Rapid Release Pro1 User Manual 10-021 Rev 3 03/22/2017
Rapid Release Technology® LLC Limited Warranty
What is covered?
All parts defective in material and workmanship.
What is not covered?
Defects that have resulted from improper or unreasonable use or maintenance, strained power cord, accident, excess
moisture, improper packing, lightning, power surges, or unauthorized tampering, alteration or modification are not
covered.
Limitation on Liability
WHERE PERMITTED, THE PROVISIONS OF THIS LIMITED WARRANTY ARE IN LIEU OF ANY OTHER WRITTEN
WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Notwithstanding the above, where applicable, if you
qualify as a “consumer” under the Magnuson-Moss Warranty Act, then you may be entitled to any implied warranties
allowed by law for the period of the express Limited Warranty as set forth below. Some states do not allow limitations
on how long an implied Limited Warranty lasts, so the above limitation may not apply to you.
For how long?
This Limited Warranty lasts one year from the purchase date.
What we will do?
We will, at our sole option, repair or replace any defective parts within a reasonable period of time and free of
charge.
What we will not do?
Pay shipping or transportation charges from you to us.
What you must do to obtain Limited Warranty service.
Return product in new condition with proof of purchase directly to Rapid Release Pro1. Contact us at: (949) 415-4778
or visit www.RapidReleaseTech.com/RMA for specific return and shipping instructions.
Exclusive Remedy
This Limited Warranty is fully transferable provided that the current owner furnishes the original proof of purchase.
THE MAXIMUM LIABILITY OF Rapid Release Pro1 SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU
FOR THE PRODUCT. IN NO EVENT SHALL Rapid Release Pro1 BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL
OR INDIRECT DAMAGES. Some areas do not allow limitations on the exclusion or limitation of relief, special,
incidental, consequential or indirect damages, or the limitation of liability to specified amounts, so the above
limitations or exclusions may not apply to you.
Loading...