Vertiracks
Assembly instruction
AIS018
1 Assemble upright frame A to rear beam B
starting at the top using bolts G to fix in place.
2 Fit middle rear beams C to upright frames A.
3 Fit base tray D into bottom of upright frames A.
4 Add top dividers E.
5 Add bottom dividers F (used only with
product VR27).
6 Fix to floor with fixing K.
NB. All bolts G and H torque to 60Nm
VERTIRACKS
Multiple packages
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIS018
A
Tools required: Spanners, Electric Drill and Masonry Drill
A
B
D
E
F
G
H
VR15 Starter rack with
VR15E Extension rack
C
We advise the use of protective
gloves and goggles, or eyeglasses
when assembling this product.
H
VR27 Starter rack with
VR27E Extension rack
G
K
G
K
K
H
G
J
G
ASSEMBLY
If you have any problems with this product or its assembly, please contact your local distributor or
call our helpline on 01285 686868 where a team of experts will be pleased to help.
Uprights
COMPONENTS
VERTIRACKS
Multiple packages
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIS018
A
B
Rear beams
VR27 and VR27E - 2700mm
VR15 and VR27 - 1350mm
VR15E and VR27E - 1300mm
C
Middle rear beams
VR15 and VR27 - 1350mm
VR15E and VR27E - 1300mm
D
Base tray
VR15 - 1350mm W x 550 mm D
VR27 - 1350mm W x 580 mm D
VR15E - 1300mm W x 550 mm D
VR27E - 1300mm W x 580 mm D
E
Top dividers
F
Bottom dividers
G
End frame nuts
and bolts
M10 x 80mm
J
Upright
VR15 and VR15E - 1500 mm
Rapid Vertirack, Component Check
VR15 VR15E VR15D VR27 VR27E VR27BD VR27D
Uprights ‘A’ ---21--
Uprights ‘H’ 21-----
Top Rear Beams ‘B’ 1 1-11- -
Middle Rear Beams ‘C’ 1 1-22- -
Base Tray ‘D’ 1 1-11- -
Top Dividers ‘E’ 3 3133 - 1
Bottom Dividers ‘F’ ---331-
End Fame Nuts 12 6 - 16 8 - -
& Bolts ‘G’
Divider Nuts & Bolts ‘H’ 6 6-99- -
H
Divider nuts and bolts
M10 x 25mm
K
Floor fixings
M10 x 80mm
If you have any problems with this product or its assembly, please contact your local distributor or
call our helpline on 01285 686868 where a team of experts will be pleased to help.
Loading...