Packing station trolley
Assembly instruction
AIW017
1 Fit castors G and H to uprights A using screws J.
2 Assemble both ends first - A and B starting
with the bottom holes, fit the first side beams B.
Fit the top side beams to the top holes of the
uprights.
3 Tap together using rubber mallet.
4 Fit front and rear beams C to uprights A level
with side beams B.
5 Place shelf D into the bottom of the trolley.
6 Fit reel bar cups E to the top of side beams B.
7 Insert reel bar F into the reel bar cups.
8 Finish by placing top caps I onto uprights A.
ASSEMBLY
PACKING STATION TROLLEY
NMPSRT2
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIW017
Tools required:
Rubber mallet
A
A
B
B
C
C
D
E
F
G
H
I
J
Castor must
fix through
hole nearest
the upright.
We advise the use of
protective gloves and
goggles, or eyeglasses
when assembling this
product.
Uprights
COMPONENTS
PACKING STATION TROLLEY
NMPSRT2
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIW017
A
Keep heavier items
on the bottom shelves
Do not climb
on your shelving
Make sure it is on a
level and even floor
Keep your
shelving dry
SAFETY
640 mm H
4 of
B
Side beams
455 mm D
4 of
C
Front and rear beams
920 mm W
4 of
D
Shelf
1 of
E
Reel bar cups
2 of
F
Reel bar
1 of
G
Wheel
3 of
H
Fixed wheel
1 of
I
Top caps
4 of
J
Screws
8 of
Loading...