Modular mobile benches
Assembly instruction
AIW016
AIW016
MODULAR MOBILE BENCHES & TOOL STATIONS
Multiple Packages
IMPORTANT - ASSEMBLY INSTRUCTIONS
For Mobile Bench NMMB1
1 Fit castors E to uprights A using screws F.
2 Assemble both ends first - A and B starting
from the bottom, allow 1 clear hole for the
first side beam B. Fit the top side beams to the
top holes of the uprights.
3 Tap together using rubber mallet.
4 Fit front and rear beams C to uprights A level
with side beams B.
5 Position shelves D into place.
ASSEMBLY
We advise the use of
protective gloves and
goggles, or eyeglasses
when assembling
this product.
Tools required:
Rubber mallet
A
A
D
D
B
B
C
C
E
F
Illustration shows
Mobile Bench NMMB1
Castor must
fix through
hole nearest
the upright.
Uprights
COMPONENTS
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIW016
A
Keep heavier items
on the bottom shelves
Do not climb
on your shelving
Make sure it is on a
level and even floor
Keep your
shelving dry
B
Side beams
610 mm
4 of per bay
SAFETY
915 mm or 1600 mm
4 of per bay
C
Front and rear beams
915 mm or 1525 mm
4 of per bay
D
MDF shelves
2 of per bay
E
Castor pack
4 of per bay
F
Screws and bolts
1 set per castor
MODULAR MOBILE BENCHES & TOOL STATIONS
Multiple Packages
Loading...