Heavy duty workbench
Assembly instruction
AIW013
HEAVY DUTY WORK BENCH
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIW013
1 Fit plastic feet, F, to the bottom of uprights A.
2 For 2 shelf unit, fit side beams B to uprights
A as illustrated, the lower beams B, may be
fitted at the shelf height of your choice up to
300 mm from the floor.
3 For T-Bar and 1
1
–2shelf unit substitute the
lower side beams B, for T-Bar side beams I.
4 Fit front and rear beams C. Four of for the 2
shelf unit, three of for the 1
1
–2shelf unit and
two off for the T-Bar unit. For the 1
1
–2shelf
and T-bar fit the T-bar beam H.
5 Fit the shelf supports D, and place the work
surfaces, E and J, in place. Fit the bottom
shelf J locating with retainers K.
6 Fit 4 plastic caps G, on top of uprights A.
ASSEMBLY
We advise the use of protective
gloves and goggles, or eyeglasses
when assembling this product.
Tools required: Rubber mallet
A
Illustration shows the
2 shelf Work Bench
A
B
B
C
E
D
F
G
Illustration shows the
T-Bar 1
1
–2shelf Work Bench.
For 2 half shelf bench repeat
components H, I, J and K.
H
I
J
(See note)
overleaf
K
Uprights
4 of
COMPONENTS
HEAVY DUTY WORK BENCH
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIW013
A
C
Front and rear beams
4 of per 2 shelf and 2 half shelf configuration
3 of per 1
1
–
2
shelf configuration
2 of per T-Bar configuration
915mm H
Keep heavier items
on the bottom shelves
Do not climb
on your shelving
Make sure it is on a
level and even floor
Keep your
shelving dry
SAFETY
B
Side beams
4 of per workbench
2 of per T-Bar bench
2 of per half shelf bench
760mm or 915mm
D
Middle support beam
1 of per shelf level
760mm or 915mm
F
Plastic feet
4 of
G
Plastic caps
4 of
E
High density chipboard or melamine shelves
1 of per shelf level
Depths and widths to suit
H
T-Bar beam
1 of per T-Bar 1
1
–
2
shelf conguration
2 of per 2 half shelf conguration
1220mm, 1524mm,
1830mm or 2440mm
915 mm, 1220 mm, 1524mm,
1830mm or 2440 mm
I
T-Bar Sidebeams
2 of per T-Bar 1
1
–
2
shelf configuration
4 of per 2 half shelf configuration
J
1
–
2
High density
chipboard or melamine shelves
1 of per shelf level
Depths and widths to suit
(Not required on
915 mm W unit)
K
Lower shelf retainer
2 of per
lower shelf
Please note
additional lugs
Loading...