Page 1
1
Digital Audio
Converter AT2030
www.ranger-technology.com
Thank you for your purchase of this Ranger Digital Audio Converter.
Before installation, please read this instruction manual carefully
and keep this for your future reference.
What’s in the box
Please check the contents before your installation.
Main Unit RCA→RCA Cable USB DC Power Cable Optical Digital Cable
Features
Converts optical / coaxial digital audio to standard RCA analog audio output
Optical or Coaxial S/PDIF input selectable
PCM stereo support
LED power indicator
Outlook and Connectors
OPTICAL / COAXIAL
Switch
DC Power Jack
OPTICAL COAXIAL
S/PDIF Inputs
Left Right
RCA Audio Out
Page 2
2
Installation
Before you install the device, we recommend that you turn off all audio and
video equipment to avoid any unexpected popping noises.
When all the connections are fixed, you can then turn on the power of your related
equipment.
Making an OPTICAL S/PDIF Connection
Step 1: Please slide the switch at the side of the converter to OPTICAL.
Note : The Optical Fibre Cable is very fragile. Please take care when
connecting to your equipment. DO NOT BEND THE CABLE.
Step 2: Take the Optical Fibre cable (included) and connect one of the TOSLINK
connectors to the converter input labeled OPTICAL. Connect the other
TOSLINK connector to the OPTICAL Out of your audio / video equipment
or device.
Kindly note that the TOSLINK connector is specially shaped and
will only fit in one position. Do not exert unnecessary force on the
connector.
Step 3: Take the RCA to RCA audio cable (included) and connect one end to the
R/L audio output of the converter. Connect the other end to your stereo
system.
Step 4: Connect the barrel end of the USB DC Power Cable to the “DC IN” of the
converter and other end to any USB Port on your equipment or device.
Step 5: If you are using an external USB AC power adaptor (not included),
plug it into an AC wall socket now.
Step 6: Turn on the power of your connected equipment or device.
Step 7: Check the audio from your stereo system. If all the connections are
correct, you can now listen to the audio from your speakers. Otherwise
please check the connections and settings on your stereo system.
USB port
(Power Only)
Page 3
3
Making a COAXIAL S/PDIF Connection
Step 1: Please slide the switch at the side of the converter to COAXIAL.
Step 2: Take a coaxial S/PDIF cable (not included) and connect one end to the
converter input labeled COAXIAL. Connect the other end of the cable to
the COAXIAL Out of your audio / video equipment or device.
Step 3: Take the RCA to RCA audio cable (included) and connect one end to the
R/L audio output of the converter. Connect the other end to your stereo
system.
Step 4: Connect the barrel end of the USB DC Power Cable to the “DC IN” of the
converter and other end to any USB Port on your equipment or device.
Step 5: If you are using an external USB AC power adaptor (not supplied),
plug it into an AC wall socket now.
Step 6: Turn on the power of your connected equipment or device.
Step 7: Check the audio from your stereo system. If all the connections are
correct, you can now listen to the audio from your speakers. Otherwise
please check the connections and settings on your stereo system.
USB port
(Power Only)
Page 4
4
Specifications
OPTICAL IN EIAJ RC-5720B TOSLINK Type Plug
COAXIAL IN RCA Type Connector
DC IN 5V DC
LED indicator Power indication
Audio Output RCA Type, Right & Left ( R,L )
Audio Formats Supported LPCM 44.1KHz, 48KHz, 96KHz
Power Requirement DC-5V @600mA
Safety Precautions
‧ FOR INDOOR USE ONLY.
‧ THERE ARE NO USER SERVICEABLE PARTS INSIDE. DO NOT OPEN
THE CASING.
‧ DO NOT USE IN A HIGH HUMIDITY ENVIRONMENT.
‧ USE THE SUPPLIED USB DC POWER CABLE ONLY.
‧ WHEN CONNECTING THE OPTICAL CABLE FROM AUDIO / VIDEO
EQUIPMENT OR DEVICE, PLEASE MAKE SURE THAT THE POWER TO
THE CONVERTER IS TURNED OFF. OTHERWISE, THERE MAY BE
SIGNAL OVER THE OPTICAL CABLE. DO NOT TOUCH THE TOSLINK
CONNECTORS ON THE OPTICAL CABLE.
Loading...