Due to our policy of continual improvement, we reserve the right to change specications without prior notice.
Page 3
1. Before You Start...
This User Guide covers a number of dierent models.
Although some of the illustrations will look dierent to
your particular model the functions will be the same. We
hope the meaning is clear.
Your cooker should give you many years of trouble-free
cooking if installed and operated correctly. It is important
that you read this section before you start, particularly if you
have not used a ceramic cooker before.
This appliance is designed for domestic cooking
only. Using it for any other purpose could invalidate
any warranty or liability claim. In particular, the
oven should NOT be used for heating the kitchen –
besides invalidating claims this wastes fuel and may
overheat the control knobs.
Installation and Maintenance
In the UK the electrical installation should be in accordance
with BS 7671. Otherwise, all installations must be in
accordance with the relevant instructions in this booklet, with
the relevant national and local regulations, and with the local
electricity supply companies’ requirements.
Set the clock to ensure that the ovens are functional – see the
relevant section in this manual.
It is recommended that this appliance is serviced annually.
Only a qualied service engineer should service the cooker,
and only approved spare parts should be used.
Always allow the cooker to cool and then switch it o at the
mains before cleaning or carrying out any maintenance work,
unless specied otherwise in this guide.
Stabilizing brackets must be installed in order to
prevent tipping of the appliance.
Peculiar smells
When you rst use your cooker it may give o a slight odour.
This should stop after a little use.
Before using for the rst time, make sure that all packing
materials have been removed and then, to dispel
manufacturing odours, turn the ovens to maximum
temperature and run for 45 minutes.
Make sure the room is well ventilated to the outside (see
‘Ventilation’ below). People with respiratory or allergy
problems should vacate the area for this brief period.
Ventilation
The use of a cooking appliance results in the production
of heat and moisture in the room in which it is installed.
Therefore, ensure that the kitchen is well ventilated: keep
natural ventilation holes open or install a powered cooker
hood that vents outside. If you have several hotplates on, or
use the cooker for a long time, open a window or turn on an
extractor fan.
Personal Safety
DO NOT modify this appliance.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children or inrm persons should be supervised to
ensure that they do not play with the appliance.
CAUTION: A long term cooking process has to be
supervised from time to time. A short term cooking
process has to be supervised continuously.
Danger of re: DO NOT store items on the cooking
surfaces.
Accessible parts will become hot during use and will
retain heat even after you have stopped cooking.
Keep babies and children away from the cooker and
never wear loose-tting or hanging clothes while
the appliance is in use.
DO NOT use a steam cleaner to clean the cooker.
Always be certain that the controls are in the OFF position
when the oven is not in use, and before attempting to clean
the cooker.
Take care when touching the marked cooking areas
of the hob.
When the oven is on, DO NOT leave the oven door
open for longer than necessary, otherwise the
control knobs may become very hot.
While the oven door is open do not let children climb
on the door or sit on it.
Always keep combustible materials, e.g. curtains, and
ammable liquids a safe distance away from your cooker.
DO NOT spray aerosols in the vicinity of the cooker
while it is on.
Use dry oven gloves when applicable – using damp gloves
might result in steam burns when you touch a hot surface.
Do not use a towel or other bulky cloth in place of a glove – it
might catch re if brought into contact with a hot surface.
NEVER operate the cooker with wet hands.
DO NOT use aluminium foil to cover shelves, linings
or the oven roof.
NEVER heat unopened food containers. Pressure
build up may make the containers burst and cause
injury.
DO NOT use unstable saucepans. Always ensure that
you position the handles away from the edge of the
hotplate.
1
Page 4
ArtNo.312-0001 Not cooking surface
Fig. 1.1
Make sure to use adequately sized pans with at
bottoms that are large enough to cover the surface
of the hotplate heating area. Using undersized
pans will expose a portion of the hotplate surface
to direct contact and may result in the ignition of
clothing.
Fig. 1.2
ArtNo.324-0001 Steam burst
Never leave the hotplate unattended at high heat settings.
Pans boiling over can cause smoking, and greasy spills may
catch on re. Use a deep fat thermometer whenever possible
to prevent fat overheating beyond the smoking point.
NEVER leave a chip pan unattended. Always heat fat
slowly, and watch as it heats. Deep fry pans should
be only one third full of fat. Filling the pan too full
of fat can cause spill over when food is added. If you
use a combination of oils or fats in frying, stir them
together before heating, or as the fats melt.
Foods for frying should be as dry as possible. Frost on frozen
foods or moisture on fresh foods can cause hot fat to bubble
up and over the sides of the pan. Carefully watch for spills or
overheating of foods when frying at high or medium high
temperatures. Never try to move a pan of hot fat, especially a
deep fat fryer. Wait until the fat is cool.
Do not use the top of the ue (the slot along the back of
the cooker) for warming plates, dishes, drying tea towels or
softening butter.
DO NOT use water on grease res and never pick
up a aming pan. Turn o the controls and then
smother a aming pan on a surface unit by covering
the pan completely with a well tting lid or baking
tray. If available, use a multipurpose dry chemical or
foam-type re extinguisher.
Cooking high moisture content foods can create a ‘steam
burst’ when the oven door is opened. When opening the
oven stand well back and allow any steam to disperse
(“Fig. 1.1”).
Take care that no water seeps into the appliance.
Do not attempt to lift or move the appliance by
pulling the door handles.
NEVER allow anyone to climb or stand on the hob.
The appliance is not intended to be operated by
means of external timer or separated remote control
system.
Hob Care
NEVER cook directly on the hob surface (“Fig. 1.2”).
DO NOT use the hob surface as a cutting board.
Do not leave utensils, foodstus or combustible items on
the hob when it is not is use (e.g. tea towels, frying pans
containing oil).
DO NOT place plastic or aluminium foil, or plastic
containers, on the hob.
DO NOT leave the hob zones switched on unless
being used for cooking.
2
Page 5
Do not stand or rest heavy objects on the hob. Although the
ArtNo.312-0001 Not cooking surface
ArtNo.312-0003 Moving pans
ceramic surface is very strong, a sharp blow or sharp falling
object (e.g. a salt cellar) might cause the surface to crack or
break (“Fig. 1.3”).
Should a crack appear in the surface, disconnect the
appliance immediately from the supply and arrange
for its repair.
Always LIFT pans o the hob. Sliding pans may cause marks
and scratches (“Fig. 1.4”). Always turn the control to the OFF
position before removing a pan.
DO NOT place anything between the base of the pan and the
hob surface (e.g. asbestos mats, aluminium foil, Wok stand).
Fig. 1.3
Avoid heating an empty pan. Doing so may damage
both the hob and pan.
Only certain types of glass, glass-ceramic, earthenware or
other glazed containers are suitable for hob cooking; others
may break because of the sudden change in temperature.
Cooker Care
As steam can condense to water droplets on the cool outer
trim of the oven, it may be necessary during cooking to wipe
away any moisture with a soft cloth. This will also help to
prevent soiling and discolouration of the oven exterior by
cooking vapours (“Fig. 1.5”).
Cleaning
DO NOT use abrasive cleaners/pads, oven aerosols/
pads or stain removers on the surface.
In the interests of hygiene and safety, the cooker should be
kept clean at all times as a build up in fats and other food
stu could result in a re.
Clean only the parts listed in this guide.
We recommend that you avoid wiping any surface unit areas
until they have cooled and the indicator light has gone o.
Sugar spills are the exception to this (see ‘Cleaning your Cooker’). After cleaning, use a dry cloth or paper towel to
remove any cleaning cream residue.
Fig. 1.4
Fig. 1.5
ArtNo.090-0007 90 Ceramic:
oven steam out the back
The ceramic surface should be washed after use in order to
prevent it from becoming scratched or dirty. However, you
should clean the hob with caution as some cleaners can produce
noxious fumes if applied to a hot surface.
Clean with caution. If a wet sponge or cloth is used to wipe
spills on a hot surface, be careful to avoid steam burns. Some
cleansers can produce noxious fumes if applied to a hot
surface.
If a Fault Occurs
If your appliance develops a fault and you are unable to solve
the problem, contact one of our service centres on the below
numbers:
UK Service Centre Tel: 0844 847 6711.
Republic of Ireland Service Centre Tel: 051 302 333
3
Page 6
2. Cooker Overview
Fig. 2.1
A
Mode
B
DocNo.020-0002 - Overview - 90 Ceramic - Generic
C
D
Fig. 2.2
TOP OVEN
Rack 2
Rack 1
Rack 5
Rack 4
Rack 3
Rack 2
Rack 1
MAIN OVEN
The 60 ceramic cooker (Fig. 2.1) has the following features:
1 at shelf
2 at shelves
A. A ceramic hob
B. A control panel
C. A conventional top oven and grill
D. A programmable multi-function oven and grill
Fig. 2.3
The Hob
Use only pans that are suitable for ceramic hobs. We
recommend stainless steel and enamelled steel pans, as pots
and pans with copper or aluminium bases leave traces on the
hob that are dicult to remove.
The kind of pan you use and the quantity of food aects the
setting required. Higher settings are required for larger quantities
of food.
Pots and pans should have thick, smooth, at bottoms
(Fig. 2.2). This allows the maximum heat transfer from the
hob to the pan, making cooking quick and energy ecient.
Never use a round-bottomed wok, even with a stand.
The very best pans have bases that are very slightly curved up
when cold. If you hold a ruler across the bottom you will see
a small gap in the middle (Fig. 2.3). When they heat up the
metal expands and lies at on the cooking surface.
Make sure that the base of the pan is clean and dry to prevent
any residue burning onto the hob panel. This also helps
prevent scratches and deposits.
4
Page 7
ArtNo.312-0003 Moving pans
Always use pans that are the same size as (or slightly larger
than) the areas marked on the hob top (Fig. 2.4). Using
smaller pans wastes heat, and any spillage will be burnt on.
Using a lid will help the contents boil more quickly.
Always lift pans o the hob (Fig. 2.5). Sliding pans may cause
marks and scratches. Always turn the control to the ‘OFF’
position before removing a pan.
Take care when placing hot lids onto the hob
surface. Lids that have been covering boiling or
steaming foods can ‘stick’ to the ceramic glass.
Should this occur, DO NOT attempt to lift the lid
o the hotplate: this may damage the hob surface.
Instead, slide the lid to the edge of the hob surface
and remove.
There are indicator lights for each of the cooking areas
(Fig. 2.6). The lights come on when a hob control is turned on
and stays lit while the surface cools.
Always take care before touching the surface, even
when the hob is turned o – it may be hotter than
you think.
Fig. 2.4
ArtNo.312-0006 Correct pan sizes
Fig. 2.5
The ratings of the dierent cooking areas are shown in
Fig. 2.7.
When cooking on the hob, you may see the hob area you
are using switch o and on: this is caused by a safety device
that limits the temperature of the hob. This is quite normal,
especially when cooking at high temperatures. If it happens
a lot with a particular pan, however, it may mean the pan is
not suitable – perhaps too small or too uneven – for a ceramic
hob.
For best results, preheat a covered serving dish for 10 minutes
before adding food to it.
Use only heat-resistant dishes.
1.2 kW1.8 kW
1.8 kW1.2 kW
Fig. 2.6
Fig. 2.7
5
Page 8
Fig. 2.8
Fig. 2.9
Grill pan handle
The Top Grill
Turn the top oven control clockwise to select either of the
grill functions, indicated by the graphics around the knob.
The indicator light will illuminate to signify that the grill is on
(Fig. 2.8). It will then cycle on and o during grilling.
Open the door and attach the grill pan handle (Fig. 2.9).
Ensure the grill pan handle is centralised and secure. Pull
the grill pan forward using the handle (Fig. 2.10) and remove
from the grill chamber.
Do not leave the handle in position when grilling.
For best results, preheat the grill for two minutes with the
door open. Food can be placed on the grill pan while you are
waiting for the grill to preheat.
Once the grill has preheated, slide the grill pan and trivet
back into the grill chamber and remove the handle.
Grill pan
Fig. 2.10
Fig. 2.11
The grill door must be kept completely open whilst
the grill is being used.
Accessible parts may be hot when the grill is in use.
Young children should be kept away.
Always wear oven gloves when using the grill.
The Top Oven
The top oven is a conventional oven. It has 2 main cooking
functions: a browning element and top and base heating.
Turn the top oven control clockwise to select the oven
function / temperature, indicated by the graphics around the
knob. The indicator light will illuminate to signify that the
oven is on (Fig. 2.11).
The browning element can be used in the latter part of the
cooking process to ne tune the results to your particular
requirements.
‘S’ (Slow) Cooking Function
This is a low temperature setting for cooking food over a long
period. The oven centre is set at 100 ºC. The ‘S’ setting can also
be used for keeping food warm.
6
Page 9
The Main Oven / Grill
The clock must be set to the time of day before the main
oven will work. See the following section on ‘Using the Clock’ for instructions on setting the time of day.
The main oven is a multi-function oven (Fig. 2.13).
Multi-function ovens have an oven fan and oven fan element,
as well as two extra heating elements. One element is in
the top of the oven and the second is under the oven base.
Take care to avoid touching the top element and element
deector when placing or removing items from the oven.
The multi-function oven has 3 main cooking functions: fan,
fan assisted and conventional cooking. These functions
should be used to complete most of your cooking.
As well as a standard grill function, the main oven also
features fanned grilling.
Use fanned grilling for all your grilling needs and defrost to
safely thaw small items of frozen food.
Table 2-1 gives a summary of the multi-function modes.
The multi-function oven has many varied uses. We suggest
you keep a careful eye on your cooking until you are familiar
with each function. Remember, not all functions will be
suitable for all food types.
‘S’ (Slow) Cooking Function
Multi-function oven
ArtNo.321-0006 - Multi-function oven
FunctionUse
Defrost
Fan oven
Fanned grilling
Fan assisted
Standard grillingGrilling with the door closed
Conventional oven
To thaw small items in the oven without
heat
A full cooking function, even heat
throughout, great for baking
Grilling meat and fish with the door
closed
A full cooking function good for roasting
and baking
A full cooking function for roasting and
baking in the lower half of the oven
Table 2-1
Fig. 2.12
This is a low temperature setting for cooking food over a long
period. The oven centre is set at 100 ºC. The ‘S’ setting can also
be used for keeping food warm.
7
Page 10
Oven Functions
Top and Base Heating
This function combines the heat from the top and
base elements. It is particularly suitable for roasting
and baking pastry, cakes and biscuits.
Food cooked on the top shelf will brown and crisp faster than
on the lower shelf, because the heat is greater at the top of
the oven than at the base, as in ‘Fan assisted oven’ function.
Similar items being cooked will need to be swapped around
for even cooking. This means that foods requiring dierent
temperatures can be cooked together, using the cooler zone
in the lower half of the oven and hotter area to the top.
Grilling (Top Oven)
This function is used for standard grilling.
The oven door should be kept completely open while
grilling is in progress.
Double Grilling (Top Oven Only)
This function is used for wider area grilling.
The oven door should be kept completely open while
grilling is in progress
Browning Element (Top Oven Only)
This function uses the element in the top of the oven
only. It is a useful function for the browning or
nishing of pasta dishes, vegetables in sauce,
shepherds pie and lasagne, the item to be browned being
already hot before switching to the top element.
Defrost (Main Oven Only)
This function operates the fan to circulate cold air
only. Make sure the temperature control is at 0°C and
ArtNo.030-0017 - MF defrost symbol
that no heat is applied. This enables small items such
as desserts, cream cakes and pieces of meat, sh and poultry
to be defrosted.
Defrosting in this way speeds up the process and protects
the food from ies. Pieces of meat, sh and poultry should
be placed on a shelf, over a tray to catch any drips. Be sure to
wash the shelf and tray after defrosting.
Defrost with the oven door closed.
Large items, such as whole chickens and joints should not be
defrosted in this way. We recommend this be carried out in a
refrigerator.
throughout the oven, allowing you to cook large amounts
quickly.
Fan oven cooking is particularly suitable for baking on several
shelves at one time and is a good ‘all-round’ function. It may
be necessary to reduce the temperature by approximately
10
°C for recipes previously cooked in a conventional oven.
Fan Assisted Oven (Main Oven Only)
This function operates the fan, circulating air heated
by the elements at the top and the base of the oven.
ArtNo.030-0014 - Top & Bottom Fan Symbol
The combination of fan and conventional cooking
(top and base heat) makes this function ideal for cooking
large items that need thorough cooking, such as a large meat
roast.
It is also possible to bake on two shelves at one time,
although they will need to be swapped over during the
cooking time, as the heat at the top of the oven is greater
than at the base, when using this function.
This is a fast intensive form of cooking; keep an eye on the
food cooking until you have become accustomed to this
function.
Grilling (Main Oven)
This function is used for standard grilling.
The oven door should be kept closed while grilling is
ArtNo.030-0018 - MF Fan Grill Symbol
in progress.
Fanned Grilling (Main Oven Only)
This function operates the fan whilst the top element
is on. It produces a more even, less erce heat than a
ArtNo.030-0018 - MF Fan Grill Symbol
conventional grill. For best results, place the food to
be grilled on a trivet over a roasting tin, which should be
smaller than a conventional grill pan. This allows greater air
circulation. Thick pieces of meat or sh are ideal for grilling in
this way, as the circulated air reduces the erceness of the
heat from the grill.
The oven door should be kept closed while grilling is in
progress, so saving energy.
You will also nd that the food needs to be watched and
turned less than for normal grilling. Preheat this function
before cooking.
For best results we recommend that the grill pan is not
located on the uppermost shelf.
Defrosting should not be carried out in a warm oven or when
an adjoining oven is in use or still warm.
Make sure that dairy foods, meat and poultry are completely
defrosted before cooking.
Fan Oven (Main Oven Only)
This function operates the fan and the heating
element around it. An even heat is produced
ArtNo.030-0016 - MF Fan Oven Symbol
8
Page 11
Operating the Main Oven
Multi-function Oven
The multi-function oven has two controls: a function selector
and a temperature setting knob (Fig. 2.13).
Turn the function selector control to a cooking function. The
indicator light will illuminate to signify that the oven is on.
Turn the oven temperature knob to the temperature required,
indicated by the graphics around the knob. (Fig. 2.14).
Fig. 2.13
Fig. 2.14
9
Page 12
ArtNo.306-0001- 3-button clock
Mode
ArtNo.306-0001 - 3-button clock
Mode
ArtNo.306-0001- 3-button clock
Mode
ArtNo.306-0001 - 3-button clock
Mode
ArtNo.306-0001- 3-button clock
Mode
Fig. 2.15
Using the Clock
You can use the clock to turn the main oven on and o. The
clock must be set to the time of day before the oven will
work.
Note: When using the timer functions, rst set the clock as
required before setting the oven temperature.
Fig. 2.16
Fig. 2.17
Fig. 2.18
The oven can be switched on when the cook symbol [
displayed.
Setting the Clock
1. The LCD clock is shown in (Fig. 2.15). Once the cooker
is connected and switched on, the [A] symbol ashes in
the display.
2. To set the clock press the [+] and [-] buttons
simultaneously, then either the [+] or [-] button to set
the correct time.
IMPORTANT: The timed oven will not operate unless the
clock has been set.
Program Selection - Setting the Minute Minder
The minute minder [
countdown from 00.01h to 23.59h, at the end of which an
alarm will sound.
1. Press the mode [Mode] button once (Fig. 2.16). The bell
symbol [ ] will ash on the display. Select the desired
countdown from 00.01h to 23.59h using the [+] or [-]
buttons (Fig. 2.17). The countdown will automatically
begin and the [ ] symbol will show in the display.
2. Once the specied time has elapsed an alarm will sound
and the [ ] symbol ashes.
3. To stop the alarm press any button.
] provides the ability to set a
] is
Fig. 2.19
•The ‘cook period’, which is the length of time you
want the oven to cook for (dur).
•The ‘stop time’, which is the time of day you want the
oven to stop cooking (End).
To Stop the Main Oven Automatically
1. Press the mode [Mode] button, until the display ashes ‘dur’ (Fig. 2.18).
2. Select the ‘cook period’ from 00.01h to 10.00h using the
[+] or [-] buttons. Once the period is set, it is registered
automatically in 5 seconds. The display will then revert
to show the current time along with the ‘A’ and Cooking
[ ] symbols (Fig. 2.19).
3. When the ‘cook period’ is reached an alarm will sound
and the oven will stop working. The ‘A’ and Cooking [ ]
symbols will ash on the display.
4. Press any button to stop the alarm.
10
Page 13
ArtNo.306-0001 - 3-button clock
Mode
To Set a Finish Time
This function is used to set the nish time.
1. Press the mode [Mode] button, until the display ashes
‘end’ (Fig. 2.20).
2. Adjust the time using the [+] or [-] buttons.
3. When the nish time is reached an alarm will sound.
4. Press any button to stop the alarm.
To Start and Then Stop the Main Oven
Set the main oven to automatically start and stop using a
combination of the ‘cook period’ and ‘stop time’.
Fig. 2.20
Fig. 2.21
You cannot set a start time directly – this is set
automatically by a combination of the ‘cook period’ and ‘stop time’.
1. Press the mode [Mode] button until the display ashes
‘dur’ (Fig. 2.21). Then set the ‘cook period’ using the [+]
or [-] buttons.
2. Press the mode [Mode] button until the display ashes
‘End’ (Fig. 2.22). Then set the ‘stop time’ using the
[+] or [-] buttons. After a 5 second period following
adjustment the current time will be displayed along
with the ‘A’ and cooking [ ] symbols (Fig. 2.23).
3. Set the oven to the required cooking temperature.
4. When cooking is nished an alarm will sound and the ‘A’
symbol will ash in the display. Press any button to stop
the alarm and return to manual cooking.
Mode
ArtNo.306-0001 - 3-button clock
Fig. 2.22
Mode
ArtNo.306-0001 - 3-button clock
Fig. 2.23
Mode
ArtNo.306-0001- 3-button clock
11
Page 14
Fig. 2.24
Shelf guard
Oven Accessories
In addition to the grill pan and handle, the ovens are supplied
with three at shelves (Fig. 2.24). One in the top oven and
two in the main oven.
Front
Fig. 2.25 Fig. 2.26
Fig. 2.27
The oven shelves can be easily removed and retted.
Pull the shelf forward until the back of the shelf is stopped by
the shelf stop bumps in the oven sides (Fig. 2.25).
Lift up the front of the shelf so the back of the shelf will pass
under the shelf stop and then pull the shelf forward
(Fig. 2.26).
To ret the shelf, line up the shelf with a groove in the oven
rack. Lift up the front so the shelf ends clear the rack stops,
and then lower the front so that the shelf is level and push it
fully back (Fig. 2.27).
Main Oven Light
The main oven features an oven light which is actuated via
the main oven control.
12
Page 15
3. Cooking Tips
Tips on Cooking with the Timer
If you want to cook more than one dish, choose dishes that
require approximately the same cooking time. However,
dishes can be ‘slowed down’ slightly by using small containers
and covering them with aluminium foil, or ‘speeded up’
slightly by cooking smaller quantities or placing them in
larger containers.
Very perishable foods such as pork or sh should be avoided
if a long delay period is planned, especially in hot weather.
DO NOT place warm food in the oven to be timed.
DO NOT use a timed oven that is already warm.
Whole poultry must be thoroughly defrosted before being
placed in the oven. Check that meat and poultry are fully
cooked before serving.
General Oven Tips
The wire shelves should always be pushed rmly to the back
of the oven.
Baking trays with food cooking on them should be placed
level with the front edge of the oven’s wire shelves. Other
containers should be placed centrally. Keep all trays and
containers away from the back of the oven, as overbrowning
of the food may occur.
When the oven is on, do not leave the door open for
longer than necessary, otherwise the knobs may get very
hot.
• Always leave a “finger’s width” between dishes on
the same shelf. This allows the heat to circulate freely
around them.
• To reduce fat splashing when you add vegetables to hot
fat around a roast, dry them thoroughly or brush lightly
with cooking oil.
• Where dishes may boil and spill over during cooking,
place them on a baking tray.
• The ‘Cook & Clean’ oven liners (see ‘Cleaning Your Cooker’) work better when fat splashes are avoided.
Cover meat when cooking with foil or use a roasting
bag.
• Sufficient heat rises out of the oven while cooking to
warm plates in the grill compartment.
• If you want to brown the base of a pastry dish, preheat
the baking tray for 15 minutes before placing the dish in
the centre of the tray.
13
Page 16
4. Cooking table
DocNo.031-0004 - Cooking table - electric & fan single cavity
The oven control settings and cooking times given in the table below are intended to be used
AS A GUIDE ONLY. Individual tastes may require the temperature to be altered to provide a
preferred result.
Food is cooked at lower temperature in a fan oven than in a conventional oven. When using
recipes, reduce the fan oven temperature by 10 °C and the cooking time by 5-10 minutes. The
temperature in the fan oven does not vary with height in the oven so you can use any shelf.
Conventional Oven
Food
Meat
Beef (no bone)
Lamb
Pork
Poultry
Chicken
Turkey
Duck
Casserole
Yorkshire Pudding
Cake
Very rich fruit - Christmas,
wedding, etc.
Fruit 180 mm tin
Fruit 230 mm tin
Madeira 180 mm
Small cakes
Scones
Victoria sandwich
180 mm tin
210 mm tin
30-35 minutes per 500g +30-35 minutes.
20-25 minutes per 500g +20-25 minutes.
30-35 minutes per 500g +30-35 minutes.
25-30 minutes per 500g +25-30 minutes.
35-40 minutes per 500g +35-40 minutes.
25-30 minutes per 500g +25-30 minutes.
20-25 minutes per 500g +20-25 minutes.
15-20 minutes per 500g +15-20 minutes.
20 minutes per 500g +20 minutes.
15 minutes per 500g +15 minutes.
25-30 minutes per 500g.
20 minutes per 500g.
2-4 hours according to recipe.
Large tins 30-35 minutes; individual 10-20 minutes.
45-50 minutes per 500g of mixture.
2-2½ hours.
Up to 3½ hours.
80-90 minutes.
15-25 minutes.
10-15 minutes.
20-30 minutes.
30-40 minutes.
20-30 minutes on a preheated tray.
35-45 minutes.
10-20 minutes according to size.
20-40 minutes according to size.
2-3 hours.
45-60 minutes.
40-45 minutes.
2 to 3 hours.
20-30 minutes.
15-20 minutes.
15-20 minutes per 500g.
Steaks according to thickness.
Top (T)
Centre (C)
Base (B)
Thoroughly thaw frozen joints before
cooking. Meat may be roasted at
220°C (210°C for fan oven) and the
cooking time adjusted accordingly.
For stuffed and rolled meats, add
approximately 10 minutes per 500g,
or cook at 200°C (190°C) for 20
minutes then 160°C (150°C) for the
remainder.
For stuffed poultry, you could cook
at 200°C (190°C) for 20 minutes
then 160°C (150°C) for remainder.
Do not forget to include the weight
of the stuffing.
For fresh or frozen prepacked
poultry, follow instructions on the
pack. Thoroughly thaw frozen
poultry before cooking.
Using the conventional oven: when
two tier cooking leave at least one
runner space between shelves.
Position the baking tray with the
front edge along the front of the
oven shelf.
Up to three tiers can be cooked in a
fan oven at the same time but make
sure to leave at least one runner
space between each shelf being
cooked on.
Using the conventional oven: for
even browning the maximum size of
baking tray recommended is 340 mm
x 340 mm. This ensures free heat
circulation.
If cooking a two tier load, the trays
should be interchanged
approximately halfway though the
cooking time.
ArtNo.050-0007
Oven shelf positions
Oven Shelf Positions
14
Page 17
5. Cleaning Your Cooker
ArtNo.312-0010 Cleaning; scraping the ceramic hob
DocNo.042-0003 - Cleaning - CE 90 - GENERIC
Isolate the electricity supply before carrying out any major
cleaning. Allow the cooker to cool.
NEVER use paint solvents, washing soda, caustic
cleaners, biological powders, bleach, chlorine based
bleach cleaners, coarse abrasives or salt.
DO NOT mix dierent cleaning products – they may
react together with hazardous results.
All parts of the cooker can be cleaned with hot soapy water
– but take care that no surplus water seeps into the
appliance.
Remember to switch the electricity supply back on and reset
the clock before reusing the cooker.
Hob
Daily Care
First of all make sure that all heat indicator lights are o and
that the cooking surface is cool. Apply a small dab of ceramic
cleaning cream in the centre of each area to be cleaned.
Dampen a clean paper towel and work the cream onto the
cooking surface. As a nal step, wipe the cooking surface with
a clean, dry paper towel.
Fig. 5.1
Cleaning Spills
For spills and boil-overs that occur while cooking, turn the
unit o and wipe the area surrounding the hot zone with a
clean paper towel. If a spill (other than a sugary substance) is
on the hot zone, do not clean until the unit has completely
cooled down, and then follow the instructions below
(‘Cleaning Burned-on Spills’).
If you accidentally melt anything on the surface, or if you spill
foods with a high sugar content (preserves, tomato sauce,
fruit juice, etc.), remove the spill IMMEDIATELY with a razor
scraper, while the unit is still hot.
IMPORTANT: Use an oven glove to protect your hand from
potential burns.
Scrape the major spill or melted material from the cooking
zone and push into a cold area. Then, turn the unit ‘OFF’ and
allow it to cool before cleaning further. After the cooking
surface cools down and the heat indicator lights go o, follow
the ‘Daily Care’ procedure outlined above.
Cleaning Burned-on Spills
Make sure that the heat indicator lights are o and that the
hob is cool. Remove the excess burned-on substance with a
single-edged razor scraper. Hold the scraper at an angle of
about 30° to the surface and then scrape o the burned-on
matter (Fig. 5.1).
Once you have removed as much as possible with the scraper,
follow the ‘Daily Care’ procedure outlined above.
15
Page 18
notch
Fig. 5.2
Fig. 5.3
Fig. 5.4
Grill
The grill pan can be easily removed for cleaning.
The grill pan and trivet should be washed in hot soapy water.
After grilling meats or any foods that soil, leave to soak for a
few minutes immediately after use. Stubborn particles may
be removed from the trivet using a nylon brush. Alternatively,
the grill pan can be washed in a dishwasher.
Before you remove any of the grill parts for cleaning,
make sure that they are cool, or use oven gloves.
DO NOT use any abrasive substances.
Control Panel and Doors
Avoid using any abrasive cleaners, including cream cleaners.
For best results, use a liquid detergent.
The same cleaner can also be used on the doors, or
alternatively, using a soft cloth wrung out in clean hot soapy
water. You can use the same method for cleaning the control
panel and knobs.
After cleaning, polish with a dry cloth.
2
1
Top Oven Door Panel
The top oven door can be removed for ease of cleaning.
Open the oven door fully and release the saddle brackets
situated either side (Fig. 5.2). Ensure that the saddle brackets
are opened to their end positions, to prevent the hinges from
retracting into the oven door.
Fig. 5.5
Close the oven door until it is almost fully closed then
carefully lift and un-hook the door panel from the cooker
(Fig. 5.3).
To re-assemble, ensure that the saddle bracket and hinge
mechanisms are correctly positioned (Fig. 5.4).
Carefully replace the door panel using the hinge locating
notches, then close the saddle bracket (Fig. 5.5).
DO NOT use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
16
Page 19
Ovens
Catalytic Panels
The bottom oven has side catalytic panels which have been
coated with a special enamel that partly cleans itself. This
does not stop all marks on the lining, but helps to reduce the
amount of manual cleaning needed.
These panels work better above 200 °C. If you do most of your
cooking below this temperature, occasionally remove the
panels and wipe with a lint free cloth and hot soapy water.
The panels should then be dried and replaced and the oven
heated at 200 °C for about one hour. This will make sure that
the panels are working eectively.
Removing the Wire Shelving and Catalytic
Panels to Clean
The main oven lining panels can be removed for cleaning.
If you wish to clean the enamel interior of the oven, you will
need to remove the shelves before removing the catalytic
panels
Pull the wire shelves from the base clips. Then lift the shelf
from the top mounts (Fig. 5.6).
The catalytic panels can now be removed via the six screws
(Fig. 5.7).
Fig. 5.6
Fig. 5.7
Once the panels have been removed, the oven enamel
interior can be cleaned.
DO NOT use steel wool, oven cleaning pads, or any other
materials that will scratch the surface.
Ret in the reverse order.
17
Page 20
6. Troubleshooting
Interference with and repairs to the hob MUST NOT
be carried out by unqualied persons. Do not try
to repair the hob as this may result in injury and
damage to the hob. Please arrange for repair by a
suitably competent person.
A crack has appeared in the hob surface
Disconnect the cooker immediately from the power
supply and arrange for its repair. DO NOT use the cooker
until after the repair.
My hob is scratched
Always use the cleaning methods recommended in this
guide and make sure that the pan bottoms are smooth
and clean.
Marks from mineral deposits from water or food can be
removed with a cleaning cream. However, tiny scratches
are not removable but will become less visible in time as
a result of cleaning.
The oven fan is noisy
The note of the oven fan may change as the oven heats
up – this is perfectly normal.
Power failure
In the event of a failure in the electrical supply,
remember to reset the clock to make sure that the
timed oven continues to operate.
The oven is not cooking evenly
If you are cooking a large item, be prepared to turn it
round during cooking.
If two shelves are used, check that space has been left
for the heat to circulate. When a baking tray is put into
the oven, make sure that it is placed centrally on the
shelf.
Check that the door seal is not damaged and that the
door catch is adjusted so that the door is held rmly
against the seal.
A dish of water when placed on the shelf should be the
same depth all over. (For example, if it is deeper at the
back, then the back of the cooker should be raised up or
the front lowered.) If the cooker is not level, arrange for
your supplier to level it for you.
The timed oven is not coming on when turned on
manually
Is the power on? Is the clock illuminated? If not, there
may be something wrong with the power supply. Is the
cooker supply on at the isolator switch?
Has the time of day been set?
The timed oven is not coming on when automatic cooking
Has the oven knob been left in the OFF position by
mistake?
Food is cooking too slowly, too quickly, or burning
Cooking times may dier from your previous
oven. Check that you are using the recommended
temperatures and shelf positions – see the oven
cooking guide. Then adjust the settings according to
your own individual tastes.
Oven temperature getting hotter as the cooker gets older
If turning the temperature down using the oven control
knob has not worked, or has only worked for a short
time, then you may need a new thermostat. This should
be tted by a service person.
18
Page 21
The oven light is not working
The bulb has probably blown. Ensure that the
replacement bulb is heat resistant to 100
°C (Fig. 6.1).
It is recommended that replacement of the oven bulb is
carried out by a qualied installer.
Before removing the existing bulb, turn o the power
supply and make sure that the oven is cool. Open the
oven door and remove the oven shelves.
Locate the bulb cover and unscrew it by turning it
counter-clockwise – it may be very sti (Fig. 6.2).
Taking care to protect your ngers with a glove in case
the bulb should shatter, unscrew the old bulb.
Screw in the new bulb clockwise and then screw the
bulb cover back on. Turn on the electricity supply and
check that the bulb now lights.
Fig. 6.1
ArtNo.324-0005 Oven light bulb
Fig. 6.2
19
Page 22
7. Installation
INSTALLATION
Check the appliance is electrically safe when you have nished.
Dear Installer
Before you start your installation, please complete the details
below, so that, if your customer has a problem relating to
your installation, they will be able to contact you easily.
Installer’s Name
Installer’s Company
ArtNo.050-0011 - Installer information table
Installer’s Telephone Number
Appliance Serial Number
Safety Requirements and Regulations
Do not operate the appliance before it is fully installed.
This cooker must be installed in accordance with the
relevant instructions in this booklet, with the relevant
national and local regulations, and with the local
electricity supply companies’ requirements.
The appliance must be installed in accordance with the
regulations in force and only in a well ventilated space.
Ensure that the electrical chord is not wedged during
installation. If the chord is damaged, it must be
replaced by the manufacturer, its service agent or
similarly qualied person.
Read the instructions before installing or using this
appliance.
Provision of Ventilation
This appliance is not connected to a combustion products
evacuation device. Therefore, particular attention must be given
to the relevant requirements regarding ventilation.
All rooms require a window that can be opened, or equivalent,
while some rooms require a permanent vent in addition to the
window.
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but NOT
in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
20
Page 23
INSTALLATION
ArtNo.090-0028 - 90 cooker min spacing GENERIC
All dimensions are in mm
650 min.
55
420 min.
20 mm
Check the appliance is electrically safe when you have nished.
Positioning the Cooker
Fig. 7.1 shows the minimum recommended distance from
the cooker to nearby surfaces.
The cooker should not be placed near the fridge or on a base.
The hotplate surround should be level with, or above, any
adjacent work surface.
The cooker is designed to t between kitchen cabinets
spaced over 600 mm apart. 5 mm clearance either side of the
appliance is recommended to allow removal of the cooker for
servicing.
For non-combustible surfaces (such as unpainted metal or
ceramic tiles), this can be reduced to 25 mm.
A minimum space of 650 mm is required between the top of
the hob and a horizontal combustible surface.
*Any cookerhood should be installed in accordance with the
hood manufacturer’s instructions.
**Any splashback must be tted in accordance with the
manufacturers instructions.
It is recommended that there is at least 20 mm space between
the back cover of the cooker and the wall, for air circulation
(Fig. 7.2).
Fig. 7.1
Fig. 7.2
Adjacent kitchen furniture must be heat resistant to 90 °C.
Levelling the Cooker
The cooker stands on four levelling legs. These can be
adjusted 0 mm to 30 mm by turning the legs clockwise.
It is recommended that you use a spirit level on a shelf in one
of the ovens to check for level.
Moving the Cooker
On no account try and move the cooker while it is
plugged into the electricity supply.
The cooker is very heavy, so take great care.
Do not try to lift or move the cooker by pulling on
the door handles.
We recommend that two people manoeuvre the cooker.
Make sure that the oor covering is rmly xed, or removed,
to prevent it being disturbed when moving the cooker
around.
21
Page 24
INSTALLATION
Check the appliance is electrically safe when you have nished.
Fig. 7.3
LN
PE
Electrical Connection
This appliance must be installed by a suitably qualied
electrician to comply with the relevant electrical regulations,
and also the local electricity supply company requirements.
Current Operated Earth Leakage Breakers
The combined use of your cooker and other domestic
appliances may cause nuisance tripping, so we
recommend that the cooker is protected on an individual
RCD (Residual Current Device) or RCBO (Residual Current
Breaker with Overload).
IF IN DOUBT, PLEASE CONSULT A SUITABLY
QUALIFIED ELECTRICIAN.
WARNING: THE APPLIANCE MUST BE EARTHED.
Note: The cooker must be connected to the correct electrical
supply as stated on the voltage label on the cooker, through
a suitable cooker control unit incorporating a double-pole
switch, having a contact separation of at least 3 mm in all
poles.
The cooker MUST NOT be connected to an ordinary
domestic power point.
Connect the mains cable to the correct terminals for your
electrical supply type (Fig. 7.3). Check that the links are
correctly tted and that the terminal screws are tight. Secure
the mains cable using the cable clamp.
Final Checks
Hob Check
Check each cooking zone in turn. Be sure to use pans of the
correct size and material.
Grill Check
Turn on the grill control and check that the grill heats up.
Oven Check
Set the clock as described earlier, and then turn on the ovens.
Check the oven fans start to turn and that the ovens heat up.
Customer Care
Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.