Randell RanSpec 66318, RanSpec 66331, RanSpec 66343 Specifications

RanSpec Remote Ice Cream Cabinet models 66000

0°F to -5°F 60°F to 180°F0°F to -5°F

some models

available

for -10°F

applications,

consult
factory

model 66318 66331 66343

Description:

Remote refrigerated ice cream storage and dipping cabinet. 16
gauge stainless steel top, and integral backsplash with 45˚ return.
Die-stamped openings in top with insulated lids. Stainless steel
fronts, stainless steel interior with welded-in-place refrigeration
lines. 6" high adjustable and movable legs.

Specifications:

CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 5/8" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4".
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Top to have
die-stamped cut-outs with raised rims, fitted with removable,
hinged, insulated lids. Exterior body to be corrosion resistant
steel. Front panels to be removable, constructed of 22 gauge
die-stamped stainless steel. Louver panel to be die-stamped
stainless steel. Work surface to be at 36" work height. Legs to be
6" high stainless steel with adjustable bullet foot. Legs mounted
to full length channel frame assembly which is integrally welded
to bottom of body assembly. Legs can be moved left to right to
avoid floor obstacles during installation.

CABINET INTERIOR: Unit interior to be stainless steel, with interior
sides to be wrapped with refrigerating lines held firmly in place
with holding clips welded to unit body. Unit insulation to be CFC
free foamed in place urethane.

REFRIGERATION: Cooling system to utilize R-404a refrigerant,
specify if otherwise. Expansion valve and refrigeration lines
provided and installed for connection at unit rear. Syrup rail
cooled by refrigeration line installed and attached to sealed
stainless interior rail liner. Condensing unit control and solenoid
provided. Unit totally prewired to junction box.

Shown with optional finished end.

Standard Features:

• Refrigeration system set up for R-404a refrigerant,
(specify if otherwise)

• Expansion valve and refrigeration lines provided and installed
for field connection

• Superb low temperature unit for ice cream storage
and dipping

• Stainless steel interior allows double stacking of standard
3 gallon containers

• Foamed in place “CFC free” urethane insulation

• 6" high legs—adjustable and movable

• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.

This equipment is intended for use in rooms having an ambient
temperature of 86˚F (30˚C) or less.

1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net

Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,

unifiedbrands.net, for the most updated product information and specifications.

Randell RanSpec, Page 26

PP SPEC0141 Rev. A

Revised 08/07

66000 Series

CONNECTION:

1/4 " LIQUID,

R-22 REFRIG.

R134A REFRIG.

R404 REFRIG.

LINE 8 1/2 " AFF

3/8 " SUCTION

AFF =

20" AFF

BTU's

Amps

ABOVE FIXED FLOOR

EXPANSION VALVE

120V/60Hz/1Ph

CHOOSE ONE:

REFRIGERANT

OR

V

LEGEND

36"

42.75"

33"

PANEL

43"

PANEL

31"

V

OR

PANEL

18"

5"

SECTION VIEW

29" Deep Equipment
Length 18" 31" 43"
Height* 36" 36" 36"
Storage

Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 1 1 1
BTU’s 383 688 985
Ship Wt. 208 lbs. 297 lbs. 375 lbs.

33" Deep Equipment
Length 18" 31" 43"
Model No. 66318 66331 66343
Height* 36" 36" 36"
Storage

Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 1 1 1
BTU’s 401 712 1015
Ship Wt. 208 lbs. 297 lbs. 375 lbs.

* All units on 6" high adjustable, movable legs for 35 1/2" to 36 3/4" high work surface.
BTU load based on 100˚F ambient, 7˚ ice cream

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.

Component