RANDELL 9560-2 User Manual

PROJECT NAME:

LOCATION:

ITEM NO:

HOT FOOD WELL/DROP-IN

HOT FOOD WELL MODEL 9560

Stainless steel drop-in, electrically heated hot food well unit with individually and thermostatically controlled
sealed food wells designed for wet operation. Can be ordered with drains and manifold to a common gate
valve. Separate control panel for field installation, prewired.

AVAILABLE MODELS:

9560-1
9560-2
9560-3
9560-4
9560-5
9560-6
9560-2N
9560-3N

STANDARD FEATURES:

• Designed for wet operation

• Individually controlled wells for maximum

operator control

• True thermostatic control for precise food temperatures

• Drains available as option for wet operation only

• Approved for installation in either stainless or laminate

counter work

• Units listed under N.S.F. standard 4 (excludes “N”

models)

• UL approved (excludes “N” models)

UNIT TOP: Top to be one piece 18 gauge stainless

steel. Top openings to be die-stamped with raised
perimeter rims.

CONTROLS: Thermostatic controls prewired to

junction box mounted on separate stainless steel panel
for field installation in counter front. Each controls has
a lighted on/off switch that allows turning off of each
well. Connections to heating elements to be located
outside of heated zone to avoid wiring deterioration.
208 or 240V operation. (120V available on request).

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

QTY:

MODEL NO:

AIA NO:

SIS NO:

CSI SECTION: 11400

9560 Hot Food Well Wet Operation,
Model 9560-4 shown.

OPTIONS/ACCESSORIES:

Adaptor bars
Extended thermostatic lead

FOOD WELLS: Units fitted with compliment of 12”

x 20” x 6 1/2” deep, electrically heated, sealed food
wells, designed for wet operation, and are individually
and thermostatically controlled. Unit prewired to controls,
mounted on separate stainless steel panel. Note: If
optional drains & manifold are ordered, common gate is
provided installed.

UNIT BODY: Fully insulated exterior body of corrosion

resistant steel.

Hot Food Table/Drop-Ins

PPSPEC0059 RevF

Revised 02/16

9560 & 9560N

Model L D 12”x20” Pan Cap. Cut Out Size No. of Elements Watts Amps / 60 / 1 PH Ship Wt.

Unit Control Panel 120V 208V 240V

9560-1 18 1/2” 26” 1 16 1/8”x22 1/2” 14 1/4”x5 3/4” 1 1100 9.2 5.3 4.6 60

9560-2 31 7/8” 26” 2 29 7/8”x22 1/2” 14 1/4”x5 3/4” 2 2200 18.4 10.6 9.2 85

9560-3 45 9/16” 26” 3 43 1/2”x22 1/2 20”x5 3/4” 3 3300 27.6 15.9 13.8 103

9560-4 59 5/16” 26” 4 57 1/8”x22 1/2” 26”x5 3/4” 4 4400 36.8 21.2 18.4 170

9560-5 73 1/16” 26” 5 70 3/4”x22 1/2” 32”x5 3/4” 5 5500 46 27.5 23 230

9560-6 86 11/16” 26” 6 84 3/8”x22 1/2” 38”x 5 3/4” 6 6600 55.2 31.7 27.6 290

9560-2N 47.625” 18.5” 2 45.264”x16.125” 14.25”x5.75” 2 2200 18.4 10.6 9.2 108

9560-3N 69.142” 18.5” 3 66.327”x16.125” 20”x5.75” 3 3300 27.6 15.9 13.8 175

Power supply requires hard wiring to “J” box.

888-994-7636, unifiedbrands.net

© 2016 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.