RANDELL 9552A User Manual
PROJECT NAME:
LOCATION:
ITEM NO:
DROP-IN
FREEZER/PLATE CHILLER MODEL 9550A/9552A
Drop-in self-contained freezer with stainless steel top, raised rim opening, and insulated lids. Units can be
installed in two airflow directions to provide proper cooling, dependent of application. R-404a refrigerant,
“CFC free”. Wrapped refrigeration construction with condensing unit, and electronic control. Cordset for 115V
operation. All Drop-In cold pans include our easy to use hold down brackets. The Randell designers have
redesigned the brackets, making it easy to install the cold pan to any counter top.
AVAILABLE MODELS:
9550A
9552A
STANDARD FEATURES:
• Self-contained refrigeration system with electronic
control, system utilizes “CFC free”, R-404a refrigerant
• Choice of front or side airflow
• Coved cornered interior
• Stainless steel top with insulated hinged covers that
can be rotated (9552A model only), allowing a frontback opening or a left-right opening, regardless of
how you install the unit for airflow. Optional clear plexi
covers available on request.
• Self-contained freezer suitable for ice cream, frozen
foods, plate and mug chilling
• 8’ cordset provided
• Hold down clips on two sides, with additional
mounting holes
AIR FLOW: Units can be installed in two airflow
directions to provide proper cooling, dependent of
application. Front/back airflow shown at right.
Model 9550A Model 9552A
left/right airflow: left/right airflow:
Model 9550A Model 9552A
right/left airflow: right/left airflow:
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
Drop-in self-contained freezer
with stainless steel top, raised rim
opening, and insulated lids.
Model 9550A front/back airflow:
9552A front/back airflow:
UNIT EXTERIOR: Top to be one piece 18 gauge
stainless steel. Top to have opening with raised rim, fitted
with removable, hinged, insulated lid. Body exterior to be
corrosion resistant steel. Condensing unit mounted on
corrosion resistant framework, placed below unit body.
New hold down clips. Stainless steel louver panel provided
for field installation in counter.
UNIT INTERIOR: Interior to be stainless steel, with
coved corner construction for easy cleaning. Insulation to
be CFC free, foamed in place polyurethane. Unit interior
sides wrapped with refrigerating lines.
REFRIGERATION: CFC free, R-404a refrigeration
system to be wrapped refrigeration construction.
Condensing unit, and electronic control for operator
adjustability mounted just inside corrosion resistant
framework, placed below unit body. 8’ cordset (NEMA
5-15P) supplied for 115V operation.
This equipment is intended for use in rooms having an
ambient temperature of 86˚F (30˚C) or less.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
Drop-Ins
PPSPEC0058 RevC
Revised 08/15
9550A/9552A
Recommended Installation Instructions
For Self-Contained Freezers:
1. Secure unit to top and seal with “NSF”
approved silicone
2. Install inside duct with thumb screws
and adjust outside duct to fit between
condenser coil and counter’s louvered
cutout
3. Secure outside duct in place with
screws thru pre-punched holds
Model L D
9550A 28 3/8” 17 3/16” 1 1.8 6 26”x15.75” 1/3 115/60/1 6.3 5-15P 125
9552A 28 3/8” 28 3/8” 1 3.36 11.2 26”x26” 1/3 115/60/1 6.3 5-15P 165
No. of
Openings
Storage
Cu. Ft.
© 2015 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Gallon
Capacity
Counter
Cutout Dim.
H.P. Volt Amp. NEMA Ship Wt.
888-994-7636, unifiedbrands.net
Loading...