RANDELL 9404-32D-7 User Manual
PROJECT NAME:
LOCATION:
ITEM NO:
WORKTOPS/UNDERCOUNTERS
UNDERCOUNTER
Self-contained refrigerated work top unit with back-mounted removable, replaceable,
R-134a (refrigerator), R-404a (freezer) refrigeration system. “Front Breathing” refrigeration
system, requires no side or back clearance. Integrated rubber bumpers provide 1” rear
clearance on model 9301F-7. Model 9404-32D-7 with two refrigerated drawers in lieu
of door and shelves. Stainless steel worktop, self-closing door, locking casters and cordset
for 115V operation. Range from 27” to 48” long, and are 36” high. Models 9404-32-7 and
9404-32D-7 are 32.75” deep, while the others are 30” deep.
AVAILABLE MODELS:
9404-7
9404F-7
9404-32-7
9404F-32-7
9404F-32D-7
9404-32DF-7
9301-7
9301F-7
STANDARD FEATURES:
• Self-contained, removable, replaceable refrigeration
package that utilizes “CFC free” R-134a refrigerant
• “Front Breathing” (on legs/casters) refrigeration
system, no side or back clearance required. Integrated
rubber bumpers provide 1” rear clearance on model
9301F-7.
• Fully adjustable shelves, behind self-closing stainless
steel door (Model 9404-32D-7 has (2) drawers in leiu
of doors)
CABINET EXTERIOR: The top, sides, and front are
stainless steel. Cabinet top to be one piece die-formed
20 gauge stainless steel with 1 1/2” high square nosing.
Exterior sides, and die-stamped front louver panel extend
to 1/4” AFF. Bottom and back of unit are corrosion resistant
steel. Door openings to be ABS and contain magnetic
strip for positive sealing of gaskets. Model 9404-32-7
& 9404-32D-7 with drawer opening frames to be stainless
steel with ABS breaker strips. Drawer fronts to be 24
gauge stainless steel with 16 gauge stainless handle,
magnetic gasket, ABS interior liner and foamed in place
insulation. Work surface to be at 36” work height with unit
on standard 2 1/2” high casters (front two with locks).
9404-7 & 9301-7 with legs.
CABINET INTERIOR: Interior of cabinet is fully
coved to meet N.S.F. standard #7. The Interior bottom,
back, and top are anodized aluminum with coved
corners for easy clean-up. The interior ends are ABS.
Unit insulated with a minimum of 2.5” of CFC free,
foamed in place polyurethane. Model 9404-32D-7 with
two refrigerated drawers below top. Each drawer
contains two 12” x 20” x 6” deep polycarbonate panspans are removable without removing drawer tracks.
Drawer tracks are 14 gauge stainless steel with 1
5/16” stainless steel ball bearings, self-closing and
removable.
DOORS: Stainless steel front with easy to grasp
recessed handles, mounted on heavy duty concealed
hinges. Hinges are all stainless steel with bronze pivot
pin in nylon bushing, spring loaded to be self-closing.
Door with foamed in place insulation, press fit magnetic
gaskets - (designed for installation & removal without
tools), and deep draw ABS interior liner for maximum
insulation value. Model 9404-32D-7, with refrigerated
drawers in lieu of door.
REFRIGERATION: CFC free, R-134a
(refrigerators), R-404a (freezer) back-mounted
refrigeration system to be self-contained with
evaporator blower coil, compressor, thermostatic
control, forced-air condensing coil and capillary tube
contained in removable assembly. Condensate
evaporator provided. Units totally prewired and to be
supplied with 8’ cordset (NEMA 5-15P) for 115V
operation. “Front Breathing” refrigeration system,
requires no side or back clearance. Integrated rubber
bumpers provide 1” rear clearance on model 9301F-7.
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
SHORT FORM: 9000-7 & 9404-
32-7 Undercounters, Model 940432D-7 shown.
OPTIONS/ACCESSORIES:
Stainless steel back panel
Overshelves (double or single
tier)
Export voltages
Backsplash
Casters (9404-7 & 9301-7)
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
Worktops/Undercounters
PPSPEC900079404 RevA
Revised 02/13
9000-7 & 9404-32-7
36"
27"
27"
MUST HAVE 1" O F
CLEARENCE
IN THE REAR FOR
PROPER AIR FLOW
*
32"REFRIG
32"
(4) 1" RUBBER
BUM PER @ REAR
36"
32"
32" REFRIG
*
32" REFRIG
32"
32.5"
S/S
END
22"
24"REFRIG
*
24"REFRIG
48"
30"
Drawings are to be viewed in the same order as the chart, one drawing to represent refrigerator and freezer units
Model L D H Doors Storage Cu. Ft. Pan Capacity HP Volt Amps NEMA Ship
Wt.
9404-7 27” 30” 36” (1)27” 5.66 - 1/4 115/60/1 5.5 5-15P 190
9404F-7 27” 32.75” 36” (1)27” 5.66 - 1/3 115/60/1 6.8 5-15P 190
9404-32-7 32” 32.75” 36” (1)32” 8.62 - 1/4 115/60/1 5.5 5-15P 252
9404F-32-7 32” 32.75” 36” (1)32” 8.62 - 1/2 115/60/1 8.2 5-15P 252
9404-32D-7 32” 32.75” 36” (2)32” drawers - (2) 12”x20”x6” per drawer 1/4 115/60/1 5.5 5-15P 300
9404F-32D-7 32” 32.75” 36” (2) 32” drawers - - 1/3 115/60/1 6.8 5-15P 300
9301-7 48” 30” 36” (2) 24” 10.82 - 1/4 115/60/1 5.5 5-15P 265
9301F-7 48” 30” 36” (2) 24” 10.82 - 1/2 115/60/1 8.2 5-15P 265
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...