RANDELL 533117PR User Manual

PROJECT NAME:

LOCATION:

ITEM NO:

CUSTOM

REMOTE RAISED COLDWALL REFRIGERATOR MODEL 53000PR

Remote refrigerator storage units with mechanically cooled raised rail. These units are offered in variety of
lengths to meet your specific base storage or pan storage requirements. The mechanically cooled pan opening
uses Randell’s exclusive design technologies, such as our Exclusive Refrigerated Raised Rail Thermostat
allowing customers to make adjustments to the rail temperatures (independent of the base). The rail is
designed to be a manual defrost system and allows the operator to shut the rail off while leaving the base
operational.

AVAILABLE MODELS:

53333PR
53336PR
53339PR
53342PR
53351PR
53354PR
53357PR
53360PR
53363PR
53372PR
53375PR
53378PR
53381PR
53384PR
53390PR
533105PR
533117PR

STANDARD FEATURES:

• Low profile rail design with 2” recess pans provides

easy reach and optimal pan temperatures & reliability

• Front breathing mechanical housing with directed air

flow-Randell Exclusive

• Easy maintenance Press-Fit gaskets- A Randell

Exclusive

• Raised rail thermostat- A Randell Exclusive

• Drain in rail for easy cleaning

• Hinged Removable stainless steel covers

• Foamed in place urethane insulation providing superior

insulation and durability

• 6” high adjustable legs, moveable left to right if needed

• Available up to 16’ under one common assembly

• Adapter bars are standard to accommodate a

compliment of 1/6 size pans

CABINET ExTERIOR: Top to be one piece of die

formed 16 gauge stainless steel with 2 1/2” nosing. Ends
at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam.
Hinged louver panel to be stainless steel. Exterior

body to be corrosion resistant steel. Door opening
frames are ABS and contain magnetic strip for positive
seal of door gaskets. Work surface to be at 36” work
height. Legs to be 6” high stainless steel with
adjustable bullet foot. Legs mounted to full length
channel frame assembly which is integrally welded to
bottom of body assembly. Legs can be moved left to
right to avoid floor obstacles during installation.

CABINET INTERIOR: Base interior to be ABS

thermoplastic at ends only. Stainless steel interior liner
to be coved cornered to form bottom, back and top. One
baked enamel finished shelf provided behind each
door. Unit insulation to be CFC free foamed in place
urethane.

DOORS: Door fronts to be 22-gauge stainless steel

exterior front with 16 gauge stainless steel door pulls
handles. The interior liner is vacuumed formed ABS with
integral gasket retainer for easy cleaning and accepts
Randell’s Exclusive Press Fit Gasket system. Doors are
mounted on concealed hinges. One removable wire shelf
is supplied behind each door.

REFRIGERATION: Refrigerant to be specified

by customer (Specification based on R-404a refrigerant).
System is a balanced heavy duty system set-up to accept
hook-up to a single compressor system. The base is
cooled by an independent blower coil operating on its
own expansion valve and thermostat and operates
through a dedicated solenoid valve. The rail is provided
with its own rail thermostat (located in the mechanical
housing) making it easily adjustable for specific ambient
conditions without effecting the balance of the system.
An on/off switch for the rail is provided. Optional electric
condensate evaporator.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

QTY:

MODEL NO:

AIA NO:

SIS NO:

CSI SECTION: 11400

Remote Raised Coldwall Refrigerator.
Model 53334PR shown with optional
finished end.

OPTIONS/ACCESSORIES:

Patented Drawer Cartridge

Systems - Exclusive

Randell Feature + 3 years parts

& labor warranty!
Partial Length Rails
Tray racks for sheet pans (33”

dp., 24” doors only)
Cutting boards
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back

options
Casters in lieu of legs
Over-shelving storage options
Lift-off (removable) night covers
Hinged slide-back removable

covers
Flat top rails for use in display

type kitchens
Ambient fighting hood design

with slide-back covers
Wide pan rail

Custom

PPSPEC0134 RevB

Revised 10/13

53000PR

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.