RANDELL 33348 User Manual

PROJECT NAME:
LOCATION:
ITEM NO:
CUSTOM
OPEN BASE ELECTRIC HOT FOOD TABLE MODEL 33000
Open shelving base hot food table with 16 gauge stainless top, and integral backsplash with 45˚ return. Individual die-stamped 12 x 20 top openings, common water bath tank with thermostatically controlled external heating elements, and 8” deep plate shelf. Drain, gate valve, and fill faucet provided.6” high adjustable and movable legs.
AVAILABLE MODELS:
33330 33348 33360 33372 33386
STANDARD FEATURES:
Available under one piece top with other modular
equipment up to 16’ in length
6” high legs—adjustable and movable
Thermostatic control for precise food temperatures
Available for 208 or 240 volt operation only
Heating elements mounted beneath tank to avoid
troublesome cut outs in tank body.
Individual die-stamped 12 x 20 openings hold pans
above common bath tank
Drain, gate valve and swivel fill faucet provided
45˚ integral stainless backsplash providing access to
electrical chase is standard. 90˚ stainless backsplash is optional.
UNIT TOP: Top to be one piece of die formed 16
gauge stainless steel with 2 5/8” nosing. Backsplash to be coved cornered, with 45˚ return at top and overall height of 6 3/4”. Ends at top fitted with recessed heavy duty steel bars for field bolting units together, producing a hairline seam. Top stamped with individual 12 x 20 die formed raised perimeter openings. Swivel fill faucet provided. Unit with 8” deep, removable 18 gauge stainless steel plate shelf, and 8” wide x 1/2” thick, full length NSF composition workboard.
CONTROLS: Unit comes standard with
thermostatic controls(s). Each control(s) has a lighted on/off switch that allows turning off of control(s) without moving temperature setting. Control(s) and elements mounted on front of 8” deep removable stainless steel plate shelf designed to allow easy access to elements, control(s) and elements pans. Connections to heating elements are located outside of heated zone to avoid wiring deterioration. Individual food wells wired to common junction box(es). Power cord is supplied.
UNIT BASE: Body ends to be die-formed stainless
steel, finished and polished on the inside with corrosion resistant exterior. Insulated nosing and insulated back wall provided. Bottom shelf to be 22 gauge stainless steel with marine edge with integrally welded channel bracing, and 8” coved cornered turn up at rear. Legs to be 6” high stainless steel with adjustable bullet foot. Legs mounted to full length channel frame assembly which is integrally welded to bottom of body assembly. Legs can be moved left to right to avoid floor obstacles during installation.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
FOOD WELLS: 12” x 20” die formed raised
perimeter openings in stainless steel top. Individual, thermostatically controlled, 3000 watt element(s), as required, mounted below one piece 18 gauge, 7” deep stainless steel water bath tank to heat food wells. 1” stainless steel drain nipple and gate valve provided.
Custom
PPSPEC0126 RevB
Revised 11/14
33000
NOTE: ALL MECHANICALS ARE SHOWN IN APPROXIMENT LOCATION
12.5Amps 3.0Kw
14.4Amps 3.0Kw
MODEL # 33000
LEGEND FOR
AFF=ABOVE FINISHED
J-BOX 22" AFF
FROM REAR OF UNIT TO 1/2 " SWEAT FIT
FILL FAUCET WATER CONNECTION STUB FROM REAR OF UNIT 1/2" COPPER @ 24" AFF
CHECK ONE:
HARDWIRE CONNECTION
240/60/1Ph
208/60/1Ph
CONNECTION STUB
COPPER 19" AFF.
DRAIN LINE
DL
WI
FLOOR
36"
8"
42.75"
33"
OPEN STORAGE
PLATE SHELF
72" X 8" X .5"
POLY CUTTING BOARD
72"
OPEN STORAGE
PLATE SHELF
60" X 8" X .5"
POLY CUTTING BOARD
60"
DL
J
WI
29” Deep
Length
Height*
Wells
Elements
Ship Wt. (lbs)
30” 48’ 60” 72’ 86’
36” 36” 36” 36” 36”
2 3 4 5 6
1 1 2 2 2
213 294 365 421 477
208 Volt Models
K.W.
Amps
3 3 6 6 6
14.4 14.4 28.8 28.8 28.8
240 Volt Models
K.W.
Amps
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
3 3 6 6 6
12.5 12.5 25 25 25
33” Deep
Length
Model No.
Height*
Wells
Elements
Ship Wt. (lbs)
208 Volt Models
K.W.
Amps
240 Volt Models
K.W.
Amps
SECTION VIEW
30” 48’ 60” 72’ 86’
33330 33348 33360 33372 33386
36” 36” 36” 36” 36”
2 3 4 5 6
2 3 4 5 6
213 294 365 421 477
3 3 6 6 6
14.4 14.4 28.8 28.8 28.8
3 3 6 6 6
12.5 12.5 25 25 25
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.