RANDELL 32372 User Manual

PROJECT NAME:

LOCATION:

ITEM NO:

CUSTOM

ENCLOSED BASE ELECTRIC HOT FOOD TABLE MODEL 32000

Enclosed base hot food table with 16 gauge stainless top, and integral backsplash with 45˚ return. Individually
and thermostatically controlled electrically heated food wells, 8” wide NSF workboard and 8” plate shelf. 6”
high adjustable and movable legs.

AVAILABLE MODELS:

32330
32348
32360
32372
32386

STANDARD FEATURES:

• Available under one piece top with other modular

equipment up to 16’ in length

• 6” high legs—adjustable and movable

• Thermostatic control for precise food temperatures

• Removable plastic pan supplied for each

self-closing drawer

• Available for 120, 208 or 240 volt operation.

Single or 3 phase as noted.

• Drains and manifold available as option

(Recommended)

• 45˚ integral stainless backsplash providing access to

electrical chase is standard. 90˚ stainless backsplash
is optional.

• Optional voltage other than standard on 3-6 well only.

Cord & plug not supplied as standard with 3 phase.

UNIT TOP: Top to be one piece of die formed 16

gauge stainless steel with 2 5/8” nosing. Backsplash
to be coved cornered, with 45˚ return at top and overall
height of 6 3/4”. Ends at top fitted with recessed heavy
duty steel bars for field bolting units together, producing
a hairline seam. Top stamped with individual 12” x 20”
die formed raised perimeter openings. Unit top fitted with
compliment of 12” x 20” x 6 1/2” deep food wells. Unit
with 8” deep, removable 18 gauge stainless steel plate
shelf, and 8” wide x 1/2” thick, full length NSF
composition workboard.

FOOD WELLS: 12” x 20” x 6 1/2” deep

electrically heated, sealed food wells, individually and
thermostatically controlled.

CONTROLS: Unit comes standard with 1100 watt

elements each independently controlled thermostatic
controls. Each controls has a lighted on/off switch
that allows turning off of each well. Controls and
elements mounted on front of 8” deep removable
stainless steel plate shelf designed to allow easy
access to elements, controls and elements pans.
Connections to heating elements are located outside
of heated zone to avoid wiring deterioration. Individual
food wells wired to common junction box(es). Power
cord is supplied.

UNIT BASE: Body ends to be die-formed stainless

steel, finished and polished on the inside with
corrosion resistant exterior. Insulated nosing and
insulated back wall provided. Dry storage drawer(s)
to have pans made of plastic, removable without tools.
Drawer track to be of 16 gauge corrosion resistant
steel with 1 5/8” stainless steel bearings, self-closing.
Drawer front of 22 gauge stainless steel. Drawer
track, pans, and front assembly contained in 20
gauge corrosion resistant steel housing, exterior
painted gray. Legs to be 6” high stainless steel with
adjustable bullet foot. Legs mounted to full length
channel frame assembly which is integrally welded to
bottom of body assembly. Legs can be moved left to
right to avoid floor obstacles during installation.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

QTY:

MODEL NO:

AIA NO:

SIS NO:

CSI SECTION: 11400

Enclosed Base Electric Hot Food
Table. Model shown with optional
finished end.

Custom

PPSPEC0125 RevB

Revised 11/14

32000

CONNECTION

NOTE: ALL
MECHANICALS ARE
SHOWN IN APPROXIMENT
LOCATION

WI

DL

FILL FAUCET WATER
CONNECTION STUB
FROM REAR OF UNIT
1/2" COPPER @
24" AFF

COPPER 19" AFF.

CHECK ONE:

HARDWIRE

240/60/1Ph

9.2Amps 2.2Kw

J-BOX 22" AFF

120/60/1Ph

10.6Amps 2.2Kw

208/60/1Ph

18.4Amps 2.2Kw

TO 1/2 " SWEAT FIT

FROM REAR OF UNIT

CONNECTION STUB

DRAIN LINE

AFF=ABOVE FINISHED

LEGEND FOR

MODEL # 32000

FLOOR

36"

8"

42.75"

33"

24" DRY

B

24" DRY

PLATE SHELF

24" DRY

B

72"X8"X.5"

POLY C/B

B

72"

24" DRY

PLATE SHELF

18" DRY 18" DRY

60"X8"X.5"

POLY C/B

A

B

A

60"

DL

J

WI

B=EXTRUDED

DIMENSION

ABS LINER I.D.

16" X 16" X 6" DP.

29” Deep

Length

Height*

Wells

Elements

Ship Wt. (lbs)

30” 48’ 60” 72’ 86’

36” 36” 36” 36” 36”

2 3 4 5 6

2 3 4 5 6

225 316 388 443 498

208 Volt Models

K.W.

Amps

240 Volt Models

K.W.

Amps

2.2 3.3 4.4 5.5 6.6

10.6 15.9 21.2 26.5 31.7

2.2 3.3 4.4 5.5 6.6

9.2 13.8 18.4 23 27.5

* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.

33” Deep

Length

Model No.

Height*

Wells

Elements

Ship Wt. (lbs)

SECTION VIEW

30” 48’ 60” 72’ 86’

32330 32348 32360 32372 32386

36” 36” 36” 36” 36”

2 3 4 5 6

2 3 4 5 6

225 316 388 443 498

208 Volt Models

K.W.

Amps

2.2 3.3 4.4 5.5 6.6

10.6 15.9 21.2 26.5 31.7

240 Volt Models

K.W.

Amps

2.2 3.3 4.4 5.5 6.6

9.2 13.8 18.4 23 27.5

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.