PROJECT NAME:
LOCATION:
ITEM NO:
CUSTOM
OPEN BASE ELECTRIC HOT FOOD TABLE MODEL 31000
Open shelving base hot food table with 16 gauge stainless top, and integral backsplash with 45˚ return.
Individually and thermostatically controlled electrically heated food wells, 8” wide NSF workboard and 8” plate
shelf. 6” high adjustable and movable legs.
AVAILABLE MODELS:
31330
31348
31360
31372
31386
STANDARD FEATURES:
• Available under one piece top with other modular
equipment up to 16’ in length
• 6” high legs—adjustable and movable
• Thermostatic control for precise food temperatures
• Available for 120, 208, or 240 volt operation.
Single or 3 phase as noted.
• Drains and manifold available as option
(Recommended)
• Optional voltage other than standard on 3-6 well only.
Cord & plug not supplied as standard with 3 phase.
UNIT TOP: Top to be one piece of die formed 16
gauge stainless steel with 2 5/8” nosing. Backsplash
to be coved cornered, with 45˚ return at top and overall
height of 6 3/4”. Ends at top fitted with recessed heavy
duty steel bars for field bolting units together, producing
a hairline seam. Top stamped with individual 12” x 20”
die formed raised perimeter openings. Unit top fitted with
compliment of 12” x 12” x 6 1/2” deep food wells. Unit
with 8” deep, removable 18 gauge stainless steel plate
shelf, and 8” wide x 1/2” thick, full length NSF
composition workboard.
CONTROLS: Unit comes standard with 1100 watt
elements each independently controlled thermostatic
controls. Each controls has a lighted on/off switch
that allows turning off of each well. Controls and
elements mounted on front of 8” deep removable
stainless steel plate shelf designed to allow easy
access to elements, controls and elements pans.
Connections to heating elements are located outside
of heated zone to avoid wiring deterioration. Individual
food wells wired to common junction box(es). Power
cord is supplied.
UNIT BASE: Body ends to be die-formed stainless
steel, finished and polished on the inside with
corrosion resistant exterior. Insulated nosing and
insulated back wall provided. Bottom shelf to be
22 gauge stainless steel with marine edge with
integrally welded channel bracing, and 8” coved
cornered turn up at rear. Legs to be 6” high stainless
steel with adjustable bullet foot. Legs mounted to full
length channel frame assembly which is integrally
welded to bottom of body assembly. Legs can be
moved left to right to avoid floor obstacles during
installation.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
Open Base Electric Hot Food Table.
Model shown with optional finished
end.
FOOD WELLS: 12” x 20” x 6 1/2” deep electrically
heated, sealed food wells, individually and
thermostatically controlled.
Custom
PPSPEC0124 RevB
Revised 11/14
31000
TO 1/2 " SWEAT FIT
HARDWIRE
NOTE: ALL
MECHANICALS ARE
SHOWN IN APPROXIMENT
LOCATION
CONNECTION
J-BOX 22" AFF
CHECK ONE:
240/60/1Ph
9.2Amps 2.2Kw
208/60/1Ph
10.6Amps 2.2Kw
120/60/1Ph
18.4Amps 2.2Kw
COPPER 19" AFF.
FLOOR
FILL FAUCET WATER
CONNECTION STUB
FROM REAR OF UNIT
1/2" COPPER @
24" AFF
CONNECTION STUB
FROM REAR OF UNIT
DRAIN LINE
DL
WI
MODEL # 31000
AFF=ABOVE FINISHED
LEGEND FOR
36"
8"
42.75"
33"
PLATE SHELF
OPEN STORAGE
72" X 8" X 1/2"
POLY BRD.
72"
PLATE SHELF
OPEN STORAGE
POLY BRD.
60" X 8" X 1/2"
60"
WI
J
DL
Shown with optional faucet.
29” Deep
Length
Height*
Wells
Elements
Ship Wt. (lbs)
208 Volt Models
K.W.
Amps
240 Volt Models
K.W.
Amps
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
30” 48’ 60” 72’ 86’
36” 36” 36” 36” 36”
2 3 4 5 6
2 3 4 5 6
224 303 383 440 497
2.2 3.3 4.4 5.5 6.6
10.6 15.9 21.2 26.5 31.7
2.2 3.3 4.4 5.5 6.6
9.2 13.8 18.4 23 27.5
33” Deep
Length
Model No.
Height*
Wells
Elements
Ship Wt. (lbs)
208 Volt Models
K.W.
Amps
240 Volt Models
K.W.
Amps
SECTION VIEW
30” 48’ 60” 72’ 86’
31330 31348 31360 31372 31386
36” 36” 36” 36” 36”
2 3 4 5 6
2 3 4 5 6
224 303 383 440 497
2.2 3.3 4.4 5.5 6.6
10.6 15.9 21.2 26.5 31.7
2.2 3.3 4.4 5.5 6.6
9.2 13.8 18.4 23 27.5
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.