Reach-In Roll-In Single Door Freezer model 2235
Description:
Randell Series 2000 Single Section Roll-Ins are built for years of
efficient, high performance service. The top mounted, expansion
valve refrigeration system offers the highest, most consistent
performance available while maximizing usable interior space.
Finishes:
Standard Series Doors/Louver: Stainless steel.
Exterior Sides: Anodized aluminum. Interior: Anodized aluminum
E Series Cabinet interior, exterior sides, fronts,
and doors stainless steel.
Specifications:
CABINET EXTERIOR: Cabinet body is constructed of all metal,
inside & out. The top, bottom, & back are galvanized steel. Front
and sides are available in finishes as listed above. Door and louver
are stainless steel and are removable without tools. Provided with
stainless steel removable ramp.
CABINET INTERIOR: Interior of cabinet is fully coved to meet N.S.F.
standard #7. Solid core stainless steel interior floor is standard.
The interior walls, ceiling and door liner are available in either
stainless steel or anodized aluminum as listed above. Foamed in
place, CFC free urethane insulation. Snap-in A.B.S. breaker strips
allow access to condensate heater wires. Provided with stainless
steel rack guide.
DOORS: Stainless steel front with either anodized aluminum or
stainless steel liner, mounted on (3) heavy duty cam lift hinges
with heavy duty chrome handle, and cylinder door lock.
REFRIGERATION: Top mounted condensing unit and evaporator coil,
expansion valve system with pressure control, factory tested and
balanced to maintain (0˚ F. to -5˚ F.) average interior temperature
utilizing CFC free 404a refrigerant. Evaporator coil is coated to
resist corrosion. Unit supplied with master on/off switch and 8'
cord and plug. Access to service points without tools is standard.
Provided with full automatic coil defrost with programmable timer
and safety switches.
Standard Features:
• Expansion Valve
• Digital Control
• Exterior LED Temperature Display
• Top mounted Compressor & Evaporator Coil
• C.F.C. Free R-404a Refrigerant
• Efficient Hot Gas Condensate Evaporator
• Full Automatic Coil Defrost With Programmable Timer
and Safety Switches
• Cylinder Door Locks
• 8' Cord & Plug
• Main Power Supply Switch
• Self-Closing, Cam Lift Hinges with 120˚ Open Feature
(Lifetime Warranty)
• Triple Hinged Door
• Solid Core Stainless Steel Interior Bottom
• Polyurethane Insulation
• Snap-In Magnetic Door Gaskets
• Stainless Steel Interior Rack Guide
• Condensate Heaters Around Door Opening
• Stainless Steel Removable Ramp
• Fully Coved Interior meeting N.S.F. Standard #7
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
some models
available
for -10°F
applications,
consult
factory
Randell Reach-In, Page 22
PP SPEC0040 Rev. E
Revised 04/12
OC
HP
EH
J
DESIGNED TO ACCOMMODATE
66"H x 26"W x 29"D RACK.
ACTUAL CLEARANCE DIM.
66.5" x 26.5" x 29.5" DEEP
INDUSTRIES COMPANY
HEATED
32.5"
33"
THERMOMETER
LEGEND FOR
MODEL # 2235
4020 BTU/Hr
3/4hp
COMPRESSOR
HP
JUNCTION BOX
J
120V/60Hz/1Ph
12 Amps
9' LONG CORD SET
(NEMA 5-15P)
EH EVAPORATOR
HOUSING
OC CONDENSATE
DRAIN 1/2 "
HOT GAS
CONDENSATE
EVAPORATOR
Model 2235
TRIPLE HINGED
DOORS
84"
S/S REMOVABLE
RAMPS
NOTE:
Unit designed to accommodate one 66" high x 26" wide x 29" deep rack.
Actual rack clearance dimensions: 66 1/2" high x 26 1/2" wide x 29 1/2" deep.
Actual door opening dimensions: 67 1/2" high x 28 1/2" wide.
FOR REMOTE MODEL
Use same specifications as self-contained model except for:
Model No. Rec. H.P. Rec. BTU/Hr. Amp. Ship Wt.
2235R 1/2 2759 6 830
ONE SECTION ROLL-IN FREEZER
Doors
Model
2235 one sectionL35”D34 1/2"H84"
* Based on 90˚ ambient and -10˚ evaporator.
Cu./Ft.
HP
Volt
1
33.8
3/4
115/60/1
Amps12NEMA
5-15P
BTU/HR
2122*
Ship Wt.
880
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2010 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.