Page 1
Custom Open Base Utility Stand models 11000
model 11318 11324 11330 11336 11342 11348 11354
11360 11366 11372
Description:
Open base utility stand with 16 gauge reinforced stainless top,
and integral backsplash with 45˚ return. Reinforced stainless
steel storage shelves. 6" high adjustable and movable legs.
Specifications:
UNIT TOP: Top to be one piece of die formed 16 gauge stainless
steel with 2 5/8" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top
fitted with recessed heavy duty steel bars for field bolting units
together, producing a hairline seam. Top reinforced with (2) full
length channel braces.
UNIT BODY: Body ends to be die formed stainless steel, finished
and polished on the inside, with corrosion resistant exterior.
Shelves to be 22 gauge stainless steel with marine edge at front,
6 5/8" removable coved cornered turn up at rear, and integrally
welded channel bracing. Legs to be 6" high stainless steel with
adjustable bullet foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of body assembly.
Legs can be moved left to right to avoid floor obstacles during
installation.
Shown with optional finished end.
NOTE: Multiple units may be built under a common top to get to
longer lengths.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚
stainless backsplash is optional.
Options & Accessories:
Sliding doors
Hinged doors
Urn trough
Depth modification
Casters
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 1
Revised 09/04
Page 2
11000 Series
42.75"
36"
33"
OPEN STORAGE
OPEN STORAGE
72"
OPEN STORAGE
OPEN STORAGE
66"
OPEN STORAGE
OPEN STORAGE
60"
OPEN STORAGE
OPEN STORAGE
54"
OPEN STORAGE
OPEN STORAGE
48"
OPEN STORAGE
OPEN STORAGE
42"
OPEN STORAGE
OPEN STORAGE
36"
OPEN STORAGE
OPEN STORAGE
30"
OPEN
STORAGE
OPEN
STORAGE
24"
OPEN
STORAGE
OPEN
STORAGE
18"
22" Deep Equipment
Length 18" 24" 30" 36" 42" 48" 54"
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 127 lbs. 166 lbs. 180 lbs. 204 lbs. 228 lbs. 251 lbs. 277 lbs.
Length 60" 66" 72" 78" 84" 90" 96"
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 303 lbs. 328 lbs. 352 lbs. 380 lbs. 408 lbs. 438 lbs. 467 lbs.
29" Deep Equipment
Length 18" 24" 30" 36" 42" 48" 54"
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 127 lbs. 166 lbs. 180 lbs. 204 lbs. 228 lbs. 251 lbs. 277 lbs.
Length 60" 66" 72" 78" 84" 90" 96"
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 303 lbs. 328 lbs. 352 lbs. 380 lbs. 408 lbs. 438 lbs. 467 lbs.
33" Deep Equipment
Length 18" 24" 30" 36" 42" 48" 54"
Model No. 11318 11324 11330 11336 11342 11348 11354
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 127 lbs. 166 lbs. 180 lbs. 204 lbs. 228 lbs. 251 lbs. 277 lbs.
Length 60" 66" 72" 78" 84" 90" 96"
Model No. 11360 11366 11372 11378 11384 11390 11396
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 303 lbs. 328 lbs. 352 lbs. 380 lbs. 408 lbs. 438 lbs. 467 lbs.
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 3
Custom Drawer Base Utility Stand models 12000
model 12318 12324 12336 12348 12360 12372
Description:
Drawer base utility stand with 16 gauge reinforced stainless top,
and integral backsplash with 45˚ return. Self-closing dry storage
drawers on 16 gauge tracks with 1 5/8" stainless bearings and
removable plastic pans. 6" high adjustable and movable legs.
Specifications:
UNIT TOP: Top to be one piece of die formed 16 gauge stainless
steel with 2 1/2" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top
fitted with recessed heavy duty steel bars for field bolting units
together, producing a hairline seam. Top reinforced with (2) full
length channel braces.
UNIT BODY: Body ends to be die formed stainless steel, finished
and polished on the inside, with corrosion resistant exterior. Shelf
to be 22 gauge stainless steel with marine edge at front, 6 5/8"
removable coved cornered turn up at rear, and integrally welded
channel bracing. Dry storage drawer(s) are located below shelf.
Drawer pans are plastic, removable without tools, with drawer
track of 16 gauge stainless steel with 1 5/8" stainless steel
bearings, self-closing. Drawer front of 22 gauge stainless steel.
Drawer track, pan(s) and front assembly contained in 20 gauge
stainless steel housing. Legs to be 6" high stainless steel with
adjustable bullet foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of body assembly.
Legs can be moved left to right to avoid floor obstacles during
installation.
Shown with optional finished end.
Options & Accessories:
Additional drawers
Urn trough
Depth modification
Casters
NOTE: Multiple units may be built under a common top to get to
longer lengths.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• Removable plastic pan(s) supplied for each self-closing
drawer
• 45˚ integral stainless backsplash is standard.
90˚ stainless backsplash is optional.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 2
Revised 09/04
Page 4
12000 Series
33"
36"
42.75"
B
24" DRY
OPEN STORAGE
B
24" DRY
B
24" DRY
72"
AA
B
24" DRY
OPEN STORAGE
18" DRY 18" DRY
60"
BB
24" DRY
OPEN STORAGE
24" DRY
48"
OPEN STORAGE
18" DRY
AA
18" DRY
36"
B
24" DRY
STORAGE
OPEN
24"
A
18" DRY
STORAGE
OPEN
18"
ABS DRAWER PANS
Drawer Size Removable Pan Size
A 18" 11" x 16" x 6"
B 24" 16" x 16" x 6"
29" Deep Equipment
Length 18" 24" 36" 48" 60" 72" 84" 96"
Height* 36" 36" 36" 36" 36" 36" 36" 36"
Drawers (1) 18" (1) 24" (2) 18" (2) 24" (2) 18" (1) 24" (3) 24" (2) 18" (2) 24" (4) 24"
Ship Wt. 152 lbs. 180 lbs. 236 lbs. 285 lbs. 334 lbs. 384 lbs. 427 lbs. 467 lbs.
33" Deep Equipment
Length 18" 24" 36" 48" 60" 72" 84" 96"
Model No. 12318 12324 12336 12348 12360 12372 12384 12396
Height* 36" 36" 36" 36" 36" 36" 36" 36"
Drawers (1) 18" (1) 24" (2) 18" (2) 24" (2) 18" (1) 24" (3) 24" (2) 18" (2) 24" (4) 24"
Ship Wt. 152 lbs. 180 lbs. 236 lbs. 285 lbs. 334 lbs. 384 lbs. 427 lbs. 467 lbs.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 5
Custom Top Extension models 18000 & 19000
18000 Stainless Steel Top Extension Open to Floor
Stainless steel top extension open to the floor with stainless steel
finished interior. Ship weight of 60 lbs/ft.
Up to 18”
24”
36”
48”
60”
72”
84”
96”
19000 Stainless Steel Top Extension with Removable Front Panel
Removable stainless steel front panel includes reinforced top and
galvanized sides. Top depth to match adjacent equipment (specify
as required). Ship weight of 60 lbs/ft.
Up to 18”
24”
36”
48”
60”
72”
84”
96”
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 3
Revised 09/04
Page 6
blank page
Page 7
Custom Open Base Equipment Stand models 21000
model 21348 21360 21372 21384 21396 213108 213120
Description:
Open shelving cooking equipment stand with reinforced stainless
steel equipment shelf. Integral backsplash with 45˚ return.
Reinforced stainless steel storage shelf. 6" high adjustable and
movable legs.
Specifications:
EQUIPMENT SHELF: Equipment shelf to be one piece of dieformed stainless steel with 2” nosing and marine edge. Shelf is
reinforced with welded channel brace assembly.
UNIT BODY: Body ends to be die formed stainless steel, finished
and polished on the inside, with corrosion resistant exterior. Ends
at top fitted with recessed heavy duty steel bars for splining units
together, producing a hairline seam. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4”.
(If fitted with vent system, standard backsplash to be omitted
and unit fitted with 3” thick backsplash to meet NFPA 96). 10”
wide x 1 1/4” thick laminated maple cutting board provided with
removable supports. Bottom shelf to be 22 gauge stainless steel
with marine edge at front, 6 5/8” removable coved cornered turn
up at rear, and integrally welded channel bracing. Legs to be 6”
high stainless steel with adjustable bullet foot. Legs mounted to
full length channel frame assembly which is integrally welded
to bottom of assembly. Legs can be moved left to right to avoid
floor obstacles during installation.
Shown with optional
finished end.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• 10" wide x 1 1/4” thick laminated maple work board
• If unit is fitted with vent, then backsplash will be 3” thick
to meet NFPA 96
• 45˚ integral stainless backsplash is standard.
90˚ stainless backsplash is optional.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
29" Deep Equipment
Length 48" 60" 72" 84” 96” 108” 120”
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 254 lbs. 296 lbs. 345 lbs. 393 lbs. 437 lbs. 476 lbs. 520 lbs.
33" Deep Equipment
Length 48" 60" 72" 84" 96" 108" 120"
Model No. 21348 21360 21372 21384 21396 21608 21620
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 254 lbs. 296 lbs. 345 lbs. 393 lbs. 437 lbs. 476 lbs. 520 lbs.
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
• Top shelf depth is 25" deep on 29" deep equipment.
• Bottom shelf depth is 23 1/8" deep on 29" deep equipment.
• Top shelf depth is 29" deep on 33" deep equipment.
• Bottom shelf depth is 23 1/8" deep on 33" deep equipment.
• Inside clearance = total unit length less 3"
Randell Custom, Page 4
Revised 08/05
Page 8
21000 Series
OPEN STORAGEOPEN STORAGE
120" X 10" X 1 1/4 "
MAPLE WORK BOARD
120"
117"
OPEN STORAGE OPEN STORAGE
108" X 10" X 1 1/4 "
MAPLE WORK BOARD
108"
105"
OPEN STORAGEOPEN STORAGE
96" X 10" X 1 1/4 "
MAPLE WORK BOARD
96"
93"
OPEN STORAGE
84" X 10" X 1 1/4 "
MAPLE WORK BOARD
84"
81"
OPEN STORAGE
72" X 10" X 1 1/4 "
MAPLE WORK BOARD
72"
69"
OPEN STORAGE
60" X 10" X 1 1/4 "
MAPLE WORK BOARD
60"
57"
OPEN STORAGE
48" X 10" X 1 1/4 "
MAPLE WORK BOARD
48"
45"
42.75"
36"
33"
10"
OPEN STORAGE
OPEN STORAGE
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 9
Custom Dry Equipment Stand models 22000
model 22348 22360 22372 22384 22396 223108 223120
Description:
Open shelving cooking equipment stand with reinforced stainless steel equipment shelf. Integral backsplash with 45˚ return.
Dry storage drawers on 16 gauge tracks with 1 5/8" stainless
bearings and removable plastic pan. 6" high adjustable and
movable legs.
Specifications:
EQUIPMENT SHELF: Equipment shelf to be one piece of dieformed stainless steel with 2" nosing and marine edge. Shelf is
reinforced with welded channel brace assembly.
UNIT BODY: Body ends to be die-formed stainless steel, finished
and polished on the inside, with corrosion resistant steel exterior.
Ends at top fitted with recessed heavy duty steel bars for splining
units together, producing a hairline seam. Backsplash to be
coved cornered, with 45˚ return at top and overall height of 6 3/
4". (If fitted with vent system, standard backsplash to be omitted
and unit fitted with 3" thick backsplash to meet NFPA 96). 10
3/8" wide x 1 1/4" thick laminated maple cutting board provided
with removable supports. Dry storage drawers are located below
equipment shelf. Drawer pans are plastic, removable without
tools, with drawer track of 16 gauge stainless steel with 1 5/8"
stainless steel bearings, self-closing. Drawer front of 22 gauge
stainless steel. Drawer track, pans and front assembly contained
in 20 gauge steel housing. Legs to be 6" high stainless steel, with
adjustable bullet foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of assembly.
Legs can be moved left to right to avoid floor obstacles during
installation.
Shown with optional finished end.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• 10 3/8" wide x 1 1/4" thick laminated maple work board
• If unit is fitted with vent, then backsplash will be 3" thick
to meet NFPA 96
• Removable plastic pan supplied for each self-closing
drawer
• 45˚ integral stainless backsplash is standard.
90˚ stainless backsplash is optional.
• Equipment Rails are optional
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
29" Deep Equipment
Length 48" 60" 72" 84" 96" 108" 120"
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers (2) 24"
Ship Wt. 279 lbs. 329 lbs. 377 lbs. 427 lbs. 476 lbs. 526 lbs. 570 lbs.
33" Deep Equipment
Length 48" 60" 72" 84" 96" 108" 120"
Model No. 22348 22360 22372 22384 22396 22608 22620
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers (2) 24"
Ship Wt. 279 lbs. 329 lbs. 377 lbs. 427 lbs. 476 lbs. 526 lbs. 570 lbs.
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
• Equipment shelf depth is 25" deep on 29" deep equipment.
• Equipment shelf depth is 29" deep on 33" deep equipment.
• Inside clearance = total unit length less 3"
(2) 18" (2) 24"
(2) 18" (2) 24"
(3) 24"
(3) 24"
(2) 18" (2) 24"
(2) 18" (2) 24"
(4) 24"
(4) 24"
(2) 18" (3) 24"
(2) 18" (3) 24"
(5) 24"
(5) 24"
Randell Custom, Page 5
Revised 09/04
Page 10
22000 Series
42.75"
36"
33"
10"
24" DRY24" DRY 24" DRY 24" DRY
120" X 10" X 1 1/4 "
MAPLE WORK BOARD
B
B
B
24" DRY
B B
120"
117"
A
A
24" DRY24" DRY 24" DRY18" DRY 18" DRY
B
108" X 10" X 1 1/4 "
MAPLE WORK BOARD
B
B
108"
105"
24" DRY24" DRY 24" DRY 24" DRY
B
96" X 10" X 1 1/4 "
MAPLE WORK BOARD
B B B
96"
93"
84" X 10" X 1 1/4 "
MAPLE WORK BOARD
18" DRY24" DRY 18" DRY
B
A A
24" DRY
B
84"
81"
24" DRY24" DRY 24" DRY
72" X 10" X 1 1/4 "
B
MAPLE WORK BOARD
B B
72"
69"
24" DRY18" DRY 18" DRY
60" X 10" X 1 1/4 "
MAPLE WORK BOARD
A
B
A
60"
57"
24" DRY24" DRY
48" X 10" X 1 1/4 "
MAPLE WORK BOARD
B
B
48"
45"
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 11
Custom Enclosure models 23000
model 23348 23360 23372 23384 23396 233108 233120
Description:
Stainless steel enclosure with stainless steel adjustable legs
Specifications:
Stainless steel enclosure with finished 18 gauge interior sides
and back. Backsplash to be coved cornered, with 45˚ return
at top and overall height of 6 3/4". (If fitted with vent system,
standard backsplash to be omitted and unit fitted with 3" thick
backsplash to meet NFPA 96). Ends fitted with recessed heavy
duty steel bars for splining units together, producing a hairline
seam. Standard corrosion resistant exterior ends.
This equipment is intended for use in rooms having an ambient
temperature of 86˚F (30˚C) or less.
Standard Features:
• Stainless steel interior for enclosing floor model cooking
equipment
• 6" high adjustable legs
• Can be ordered with vent system to make complete
freestanding assembly
• If unit is fitted with vent, then backsplash will be 3" thick to
meet NFPA 96
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
Shown with optional finished end.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 6
Revised 02/05
Page 12
23000 Series
STRETCH LG. TO FIT APPLICATION
48"
46"
42.75"
36"
33"
29" Deep Equipment
Length 42" 48" 60" 66" 72" 84" 96" 108" 120"
Height* 36" 36" 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 175 lbs. 190 lbs. 218 lbs. 232 lbs. 247 lbs. 275 lbs. 304 lbs. 332 lbs. 361 lbs.
33" Deep Equipment
Length 42" 48" 60" 66" 72" 84" 96" 108" 120"
Model No. 23342 23366 23378 23396 23602 23608 23614 23620
Height* 36" 36" 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 175 lbs. 190 lbs. 218 lbs. 232 lbs. 247 lbs. 275 lbs. 304 lbs. 332 lbs. 361 lbs.
* All units 6" high adjustable legs.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 13
Custom Remote Refrigerated Equipment Stand models 24000AR
model 24348AR 24366AR 24378AR 24384AR 24396AR 243102AR 243114AR
Description:
Remote, CFC free, refrigerated cooking equipment stand with
reinforced stainless steel equipment shelf. Integral backsplash
with 45˚ return. Refrigerated drawers on 16 gauge stainless
steel tracks with 1 5/8" stainless steel bearings and removable
plastic pan. 6" high adjustable legs. R-134a cooling system
with evaporator blower coil and expansion valve supplied and
installed.
Specifications:
EQUIPMENT SHELF: Equipment shelf to be one piece of dieformed stainless steel with 2" nosing and marine edge. Shelf is
reinforced with welded channel brace assembly.
UNIT BODY: Body ends to be die-formed stainless steel, finished
and polished on the inside, with corrosion resistant exterior. Ends
at top fitted with recessed heavy duty steel bars for splining units
together, producing a hairline seam. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4". (If
fitted with vent system, standard backsplash to be omitted and
unit fitted with 3" thick backsplash to meet NFPA 96). 10 3/8"
wide x 1 1/4" thick laminated maple cutting board provided with
removable supports. Base interior to be ABS thermoplastic at
ends only. Stainless steel interior liner to be coved cornered to
form bottom, back and top. Unit insulated with CFC free, high
density polyurethane expanding foam. Units totally prewired to
junction box. Legs to be 6" high stainless steel, with adjustable
bullet foot. Legs mounted to full length channel frame assembly
which is integrally welded to bottom of assembly. Legs can be
moved left to right to avoid floor obstacles during installation.
Shown with optional finished end.
Standard Features:
• Available under one piece top with other modular equipment up
to 16' in length
• 6" high legs—adjustable and movable
• 10 3/8" wide x 1 1/4" thick laminated maple work board
• Self-closing drawers with removable plastic pan
• Evaporator blower coil with expansion valve, solenoid valve,
thermostat, and refrigeration lines provided and installed,
R-134a refrigerant, CFC free
• If unit is fitted with vent, then backsplash will be 3" thick to
meet NFPA 96
• 45˚ integral stainless backsplash is standard. 90˚ stainless
steel backsplash is optional.
• Equipment Rails are optional
DRAWERS: Remote refrigerated drawers are located below
equipment shelf. Drawer liners are plastic, removable without
tools, with drawer tracks of 16 gauge stainless steel with 1 5/8"
stainless steel bearings, self-closing. Drawer opening frame to be
ABS and contain magnetic strip for positive sealing of gaskets.
Drawer fronts to be 22 gauge stainless steel with 16 gauge
stainless steel handles, magnetic gaskets, and plastic pan.
REFRIGERATION: Interior fitted with Randell R-134a evaporator
blower coil for cooling base. Expansion valve, solenoid valve,
thermostat, and refrigeration lines provided and installed for
connection at unit rear. Condensing unit and controls not
provided. Units totally prewired to junction box.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 7
Revised 09/04
Page 14
24000AR Series
MODEL # 24000AR
JUNCTION BOX 6 1/2 " AFF.
R134A STD. REFRIGERANT
(SPECIFY IF OTHERWISE)
1/4" LIQUID, 3/8" SUCTION
CONDENSATE DRAIN 1/2
120V-60Hz-1Ph-50W
AFF. = ABOVE FIXED FLOOR
PVC 8 1/2 " AFF.
FAN MOTOR(S)
LINE 8 1/2 " AFF
1250 or 2500 BTU'S
OC
J
OR
LEGEND FOR
L
L
J
OC
OR
27"
REFRIG.24" REFRIG. REFRIG.
18" 18"
REFRIG.
18"
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
24" REFRIG.
114"
112.5"
EACH DRAWER SUPPLIED
24" REFRIG. 24" REFRIG.
REFRIG.
18"
W/(1) 12" x 20" PAN
24" REFRIG.
102"
99"
18"
REFRIG.
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
24" REFRIG. REFRIG.
18"
24" REFRIG.
93"
96"
24" REFRIG. 24" REFRIG.
24" REFRIG.
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
84"
81"
24" REFRIG24" REFRIG 24" REFRIG
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
78"
75"
24" REFRIG
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
18" REFRIG18" REFRIG
66"
63"
48" X 10" X 1 1/4 "
MAPLE WORK BOARD
W/(1) 12" x 20" PAN
EACH DRAWER SUPPLIED
18" REFRIG.24" REFRIG.
48"
45"
66" X 10" X 1 1/4 "
MAPLE WORK BOARD
78" X 10" X 1 1/4 "
MAPLE WORK BOARD
84" X 10" X 1 1/4 "
MAPLE WORK BOARD
102" X 10" X 1 1/4 "
MAPLE WORK BOARD
114" X 10" X 1 1/4 "
MAPLE WORK BOARD
96" X 10" X 1 1/4 "
MAPLE WORK BOARD
29" Deep Equipment
Length 48" 66" 78" 84" 96" 102" 114"
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers
(1) 18" (1) 24" (2) 18" (1) 24"
(3) 24" (3) 24"
(2) 18" (2) 24" (1) 18" (3) 24" (3) 18" (2) 24"
H.P. 1/4 1/4 1/4 1/3 1/3 1/3 1/3
BTUs 1250 1250 1250 2500 2500 2500 2500
Volts 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 2.5 2.5 2.5 3 3 3 3
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. 367 lbs. 452 lbs. 480 lbs. 516 lbs. 570 lbs. 634 lbs. 655 lbs.
33" Deep Equipment
Length 48" 66" 78" 84" 96" 102" 114"
Model No. 25348AR 25366AR 25378AR 25384AR 25396AR 25602AR 25614AR
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers
H.P. 1/4 1/4 1/4 1/3 1/3 1/3 1/3
BTUs 1250 1250 1250 2500 2500 2500 2500
(1) 18" (1) 24" (2) 18" (1) 24"
(3) 24" (3) 24"
(2) 18" (2) 24" (1) 18" (3) 24" (3) 18" (2) 24"
Volts 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 2.5 2.5 2.5 3 3 3 3
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. 367 lbs. 452 lbs. 480 lbs. 516 lbs. 570 lbs. 634 lbs. 655 lbs.
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
• Equipment shelf depth is 25" deep on 29" deep equipment.
• Equipment shelf depth is 29" deep on 33" deep equipment.
• Inside clearance = total unit length less 3"
ABS DRAWER PANS
Drawer Size Removable Pan Size
18" 11" x 16" x 6"
24" 16" x 16" x 6"
Page 15
Custom SC Refrigerated Equipment Stand models 25000A
model 25348A 25366A 25378A 25384A 25396A 253102A 253114A
Description:
Self-contained, CFC free, refrigerated cooking equipment
stand with reinforced stainless steel equipment shelf. Integral
backsplash with 45˚ return. Refrigerated drawers on 16 gauge
stainless steel tracks with 1 5/8" stainless steel bearings and
removable plastic pan. 6" high adjustable legs.
Specifications:
EQUIPMENT SHELF: Equipment shelf to be one piece of dieformed stainless steel with 2" nosing and marine edge. Shelf is
reinforced with welded channel brace assembly.
UNIT BODY: Body ends to be die-formed stainless steel, finished
and polished on the inside, with corrosion resistant exterior. Ends
at top fitted with recessed heavy duty steel bars for splining units
together, producing a hairline seam. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4".
(If fitted with vent system, standard backsplash to be omitted
and unit fitted with 3" thick backsplash to meet NFPA 96). 10"
wide x 1 1/4" thick laminated maple cutting board provided
with removable supports. Base interior to be ABS thermoplastic
at ends only. Stainless steel interior liner to be coved cornered
to form bottom, back and top. Unit insulated with CFC free,
high density polyurethane expanding foam. Legs to be 6" high
stainless steel, with adjustable bullet foot. Legs mounted to full
length channel frame assembly which is integrally welded to
bottom of assembly. Legs can be moved left to right to avoid
floor obstacles during installation.
DRAWERS: Self-contained refrigerated drawers are located below
equipment shelf. Drawer liners are plastic, removable without
tools, with drawer tracks of 16 gauge stainless steel with 1 5/8"
stainless steel bearings, self-closing. Drawer opening frame to be
ABS and contain magnetic strip for positive sealing of gaskets.
Drawer fronts to be 22 gauge stainless steel with 16 gauge
stainless steel handles, magnetic gaskets, and plastic pan.
Shown with optional finished end.
Standard Features:
• Available under one piece top with other modular equipment up
to 16' in length
• 6" high legs—adjustable and movable
• 10" wide x 1 1/4" thick laminated maple work board
• Self-closing drawers with removable plastic pan
• Self-contained refrigeration system features expansion valve
for fast recovery, and thermostatic control for field
adjustability, R-134a refrigerant, CFC free
• If unit is fitted with vent, then backsplash will be 3" thick to
meet NFPA 96
• 45˚ integral stainless backsplash is standard. 90˚ stainless
steel backsplash is optional.
• Equipment Rails are optional
REFRIGERATION: Interior fitted with Randell R-134a evaporator
blower coil for cooling base. Blower coil fitted with expansion valve
for fast recovery and thermostatic control for field adjustability.
Condensing unit sized and installed for proper cooling. Units
totally prewired and to be supplied with 8' cordset (NEMA 515P) for 115 volt operation. Hot gas condensate evaporator to be
installed in compressor airflow.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 8
Revised 08/05
Page 16
25000A Series
8' LONG CORD SET
CONDENSATE DRAIN 1/2 "
115V/60Hz/1Ph
JUNCTION BOX 14" AFF.
HP COMPRESSOR
AFF. = ABOVE FIXED FLOOR
MODEL # 25000A
PVC 10" AFF.
OC
HP
(NEMA 5-15P)
LEGEND FOR
36" [914]
42.75" [1086]
33"
10" [254]
HP
J
OC
24" REFRIG. 18" REFRIG. 18" REFRIG.
114" X 10" X 1.25"
MAPLE WORK BOARD
24" REFRIG.
111" [2819]
114" [2896]
24" REFRIG. 24" REFRIG.
102" X 10" X 1.25"
MAPLE WORK BOARD
24" REFRIG.
102" [2591]
99" [2515]
24" REFRIG.
96" X 10" X 1.25"
MAPLE WORK BOARD
24" REFRIG. 24" REFRIG.
93" [2362]
96" [2438]
24" REFRIG. 18" REFRIG. 18" REFRIG.
84" X 10" X 1.25"
MAPLE WORK BOARD
84" [2134]
81" [2057]
18" REFRIG.18" REFRIG. 18" REFRIG.
78" X 10" X 1.25"
MAPLE WORK BOARD
78" [1981]
75" [1905]
66" X 10" X 1.25"
MAPLE WORK BOARD
18" REFRIG.24" REFRIG.
66" [1676]
63" [1600]
24" REFRIG.
48" X 10" X 1.25"
MAPLE WORK BOARD
48" [1219]
45" [1143]
18" [457]
17"
29" Deep Equipment
Length 48" 66" 78" 84" 96" 102" 114"
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers (1) 24"
(1) 18" (1) 24"
(3) 18"
(2) 18" (1) 24"
(3) 24" (3) 24"
H.P. 1/4 1/4 1/4 1/4 1/4 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 6 6 6 6 6 7.5 7.5
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. 293 lbs. 425 lbs. 513 lbs. 558 lbs. 631 lbs. 661 lbs. 734 lbs.
33" Deep Equipment
Length 48" 66" 78" 84" 96" 102" 114"
Model No. 25348A 25366A 25378A 25384A 25396A 25602A 25614A
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers (1) 24"
H.P. 1/4 1/4 1/4 1/4 1/4 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 6 6 6 6 6 7.5 7.5
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. 293 lbs. 425 lbs. 513 lbs. 558 lbs. 631 lbs. 661 lbs. 734 lbs.
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
(1) 18" (1) 24"
(3) 18"
(2) 18" (1) 24"
(3) 24" (3) 24"
(2) 18" (1) 24"
(2) 18" (1) 24"
• Equipment shelf depth is 25" deep on 29" deep equipment.
• Equipment shelf depth is 29" deep on 33" deep equipment.
• Inside clearance = total unit length less 3"
ABS DRAWER PANS
Drawer Size Removable Pan Size
18" 11" x 16" x 6"
24" 16" x 16" x 6"
Page 17
Custom Open Base Electric Hot Food Table models 31000
model 31330 31348 31360 31372 31386
Description:
Open shelving base hot food table with 16 gauge stainless
top, and integral backsplash with 45˚ return. Individually and
thermostatically controlled electrically heated food wells, 8"
wide NSF workboard and 8" plate shelf. 6" high adjustable and
movable legs.
Specifications:
UNIT TOP: Top to be one piece of die formed 16 gauge stainless
steel with 2 5/8" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top
fitted with recessed heavy duty steel bars for field bolting units
together, producing a hairline seam. Top stamped with individual
12" x 20" die formed raised perimeter openings. Unit top fitted
with compliment of 12" x 12" x 6 1/2" deep food wells. Unit with
8" deep, removable 18 gauge stainless steel plate shelf, and 8"
wide x 1/2" thick, full length NSF composition workboard.
FOOD WELLS: 12" x 20" x 6 1/2" deep electrically heated, sealed
food wells, individually and thermostatically controlled.
CONTROLS: Thermostatic controls for 1100 watt elements
mounted on front of 8" deep removable stainless steel plate
shelf. Connections to heating elements to be located outside of
heated zone to avoid wiring deterioration. Individual food wells
wired to common junction box(es).
shown with optional finished end.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• Thermostatic control for precise food temperatures
• Available for 120, 208, or 240 volt operation.
Single or 3 phase as noted.
• Drains and manifold available as option (Recommended)
• Optional voltage other than standard on 3-6 well only. Cord &
plug not supplied as standard with 3 phase.
UNIT BASE: Body ends to be die-formed stainless steel, finished
and polished on the inside with corrosion resistant exterior.
Insulated nosing and insulated back wall provided. Bottom shelf
to be 22 gauge stainless steel with marine edge with integrally
welded channel bracing, and 8" coved cornered turn up at rear.
Legs to be 6" high stainless steel with adjustable bullet foot.
Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be
moved left to right to avoid floor obstacles during installation.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 9
Revised 02/05
Page 18
31000 Series
TO 1/2 " SWEAT FIT
HARDWIRE
NOTE: ALL
MECHANICALS ARE
SHOWN IN APPROXIMENT
LOCATION
CONNECTION
J-BOX 22" AFF
CHECK ONE:
240/60/1Ph
9.2Amps 2.2Kw
208/60/1Ph
10.6Amps 2.2Kw
120/60/1Ph
18.4Amps 2.2Kw
COPPER 19" AFF.
FLOOR
FILL FAUCET WATER
CONNECTION STUB
FROM REAR OF UNIT
1/2" COPPER @
24" AFF
CONNECTION STUB
FROM REAR OF UNIT
DRAIN LINE
DL
WI
MODEL # 31000
AFF=ABOVE FINISHED
LEGEND FOR
36"
8"
42.75"
33"
PLATE SHELF
OPEN STORAGE
POLY BRD.
86" X 8" X 1/2"
86"
PLATE SHELF
OPEN STORAGE
72" X 8" X 1/2"
POLY BRD.
72"
PLATE SHELF
OPEN STORAGE
POLY BRD.
60" X 8" X 1/2"
60"
PLATE SHELF
OPEN STORAGE
48" X 8" X 1/2"
POLY BRD.
48"
WI
J
DL
PLATE SHELF
OPEN STORAGE
30" X 8" X 1/2"
POLY BRD.
30"
29
" DEEP EQUIPMENT
Length
30" 48" 60" 72" 86"
Height* 36" 36" 36" 36" 36"
Wells 2 3 4 5 6
Elements 2 3 4 5 6
Ship Wt. 224 lbs. 303 lbs. 383 lbs. 440 lbs. 497 lbs.
208 Volt Models
K.W. 2.2 3.3 4.4 5.5 6.6
Amps 10.6 15.9 21.2 26.5 31.7
240 Volt Models
K.W. 2.2 3.3 4.4 5.5 6.6
Amps 9.2 13.8 18.4 23 27.5
* All models with adjustable and movable legs for 35 1/2
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
" to 36 3/4" work height.
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
33
" DEEP EQUIPMENT
Length
30" 48" 60" 72" 86"
Model No. 31330 31348 31360 31372 31386
Height* 36" 36" 36" 36" 36"
Wells 2 3 4 5 6
Elements 2 3 4 5 6
Ship Wt. 224 lbs. 303 lbs. 383 lbs. 440 lbs. 497 lbs.
208 Volt Models
K.W. 2.2 3.3 4.4 5.5 6.6
Amps 10.6 15.9 21.2 26.5 31.7
240 Volt Models
K.W. 2.2 3.3 4.4 5.5 6.6
Amps 9.2 13.8 18.4 23 27.5
Page 19
Custom Enclosed Base Electric Hot Food Table models 32000
model 32330 32348 32360 32372 32386
Description:
Enclosed base hot food table with 16 gauge stainless top,
and integral backsplash with 45˚ return. Individually and
thermostatically controlled electrically heated food wells, 8"
wide NSF workboard and 8" plate shelf. 6" high adjustable and
movable legs.
Specifications:
UNIT TOP: Top to be one piece of die formed 16 gauge stainless
steel with 2 5/8" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top
fitted with recessed heavy duty steel bars for field bolting units
together, producing a hairline seam. Top stamped with individual
12" x 20" die formed raised perimeter openings. Unit top fitted
with compliment of 12" x 20" x 6 1/2" deep food wells. Unit with
8" deep, removable 18 gauge stainless steel plate shelf, and 8"
wide x 1/2" thick, full length NSF composition workboard.
FOOD WELLS: 12" x 20" x 6 1/2" deep electrically heated, sealed
food wells, individually and thermostatically controlled.
CONTROLS: Thermostatic controls for 1100 watt elements
mounted on front of 8" deep removable stainless steel plate
shelf. Connections to heating elements to be located outside of
heated zone to avoid wiring deterioration. Individual food wells
wired to common junction box(es).
UNIT BASE: Body ends to be die-formed stainless steel, finished
and polished on the inside with corrosion resistant exterior.
Insulated nosing and insulated back wall provided. Dry storage
drawer(s) to have pans made of plastic, removable without tools.
Drawer track to be of 16 gauge corrosion resistant steel with
1 5/8" stainless steel bearings, self-closing. Drawer front of 22
gauge stainless steel. Drawer track, pans, and front assembly
contained in 20 gauge corrosion resistant steel housing, exterior
painted gray. Legs to be 6" high stainless steel with adjustable
bullet foot. Legs mounted to full length channel frame assembly
which is integrally welded to bottom of body assembly. Legs can
be moved left to right to avoid floor obstacles during installation.
shown with optional finished end.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• Thermostatic control for precise food temperatures
• Removable plastic pan supplied for each
self-closing drawer
• Available for 120, 208 or 240 volt operation.
Single or 3 phase as noted.
• Drains and manifold available as option (Recommended)
• 45˚ integral stainless backsplash providing access to
electrical chase is standard. 90˚ stainless backsplash
is optional.
• Optional voltage other than standard on 3-6 well only. Cord &
plug not supplied as standard with 3 phase.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 10
Revised 02/05
Page 20
32000 Series
CONNECTION
NOTE: ALL
MECHANICALS ARE
SHOWN IN APPROXIMENT
LOCATION
WI
DL
FILL FAUCET WATER
CONNECTION STUB
FROM REAR OF UNIT
1/2" COPPER @
24" AFF
COPPER 19" AFF.
CHECK ONE:
HARDWIRE
240/60/1Ph
9.2Amps 2.2Kw
J-BOX 22" AFF
120/60/1Ph
10.6Amps 2.2Kw
208/60/1Ph
18.4Amps 2.2Kw
TO 1/2 " SWEAT FIT
FROM REAR OF UNIT
CONNECTION STUB
DRAIN LINE
AFF=ABOVE FINISHED
LEGEND FOR
MODEL # 32000
FLOOR
36"
8"
42.75"
33"
A
PLATE SHELF
18" DRY24" DRY
B
18" DRY 24" DRY
86"X8"X.5"
POLY C/B
A
B
86"
24" DRY
B
24" DRY
PLATE SHELF
24" DRY
B
72"X8"X.5"
POLY C/B
B
72"
24" DRY
PLATE SHELF
18" DRY 18" DRY
60"X8"X.5"
POLY C/B
A
B
A
60"
PLATE SHELF
48"X8"X.5"
POLY C/B
24" DRY
B
24" DRY
B
48"
DL
J
WI
24" DRY
L
N
P
PLATE SHELF
B
30"X8"X.5"
POLY C/B
B=EXTRUDED
DIMENSION
ABS LINER I.D.
16" X 16" X 6" DP.
30"
29
" DEEP EQUIPMENT
Length
Height* 36" 36" 36" 36" 36"
30" 48" 60" 72" 86"
Wells 2 3 4 5 6
Elements 2 3 4 5 6
Ship Wt. 225 lbs. 316 lbs. 388 lbs. 443 lbs. 498 lbs.
208 Volt Models
K.W. 2.2 3.3 4.4 5.5 6.6
Amps 10.6 15.9 21.2 26.5 31.7
240 Volt Models
K.W. 2.2 3.3 4.4 5.5 6.6
Amps 9.2 13.8 18.4 23 27.5
* All models with adjustable and movable legs for 35 1/2
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
" to 36 3/4" work height.
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
33
Length
Model No. 32330 32348 32360 32372 32386
" DEEP EQUIPMENT
30" 48" 60" 72" 86"
Height* 36" 36" 36" 36" 36"
Wells 2 3 4 5 6
Elements 2 3 4 5 6
Ship Wt. 225 lbs. 316 lbs. 388 lbs. 443 lbs. 498 lbs.
208 Volt Models
K.W. 2.2 3.3 4.4 5.5 6.6
Amps 10.6 15.9 21.2 26.5 31.7
240 Volt Models
K.W. 2.2 3.3 4.4 5.5 6.6
Amps 9.2 13.8 18.4 23 27.5
Page 21
Custom Open Base Electric Hot Food Table models 33000
model 33330 33348 33360 33372 33386
Description:
Open shelving base hot food table with 16 gauge stainless
top, and integral backsplash with 45˚ return. Individual diestamped 12 x 20 top openings, common water bath tank with
thermostatically controlled external heating elements, and 8"
deep plate shelf. Drain, gate valve, and fill faucet provided.6"
high adjustable and movable legs.
Specifications:
UNIT TOP: Top to be one piece of die formed 16 gauge stainless
steel with 2 5/8" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top
fitted with recessed heavy duty steel bars for field bolting units
together, producing a hairline seam. Top stamped with individual
12 x 20 die-formed raised perimeter openings. Swivel fill faucet
provided. Unit with 8" deep, removable 18 gauge stainless steel
plate shelf, and 8" wide x 1/2" thick, full length NSF composition
workboard.
FOOD WELLS: 12" x 20" die formed raised perimeter openings
in stainless steel top. Individual, thermostatically controlled,
3000 watt element(s), as required, mounted below one piece 18
gauge, 7" deep stainless steel water bath tank to heat food wells.
1" stainless steel drain nipple and gate valve provided.
CONTROLS: Thermostatic controls for element(s) mounted on
front of 8" deep removable stainless steel plate shelf. Unit totally
prewired to junction box.
UNIT BASE: Body ends to be die-formed stainless steel, finished
and polished on the inside with corrosion resistant exterior.
Insulated nosing and insulated back wall provided. Bottom shelf
to be 22 gauge stainless steel with marine edge with integrally
welded channel bracing, and 8" coved cornered turn up at rear.
Legs to be 6" high stainless steel with adjustable bullet foot.
Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be
moved left to right to avoid floor obstacles during installation.
shown with optional finished end.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• Thermostatic control for precise food temperatures
• Available for 208 or 240 volt operation only
• Heating elements mounted beneath tank to avoid
troublesome cut outs in tank body.
• Individual die-stamped 12 x 20 openings hold pans
above common bath tank
• Drain, gate valve and swivel fill faucet provided
• 45˚ integral stainless backsplash providing access to
electrical chase is standard. 90˚ stainless backsplash
is optional.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 11
Revised 09/04
Page 22
33000 Series
NOTE: ALL
MECHANICALS ARE
SHOWN IN APPROXIMENT
LOCATION
12.5Amps 3.0Kw
14.4Amps 3.0Kw
MODEL # 33000
LEGEND FOR
AFF=ABOVE FINISHED
J-BOX 22" AFF
FROM REAR OF UNIT
TO 1/2 " SWEAT FIT
FILL FAUCET WATER
CONNECTION STUB
FROM REAR OF UNIT
1/2" COPPER @
24" AFF
CHECK ONE:
HARDWIRE
CONNECTION
240/60/1Ph
208/60/1Ph
CONNECTION STUB
COPPER 19" AFF.
DRAIN LINE
DL
WI
FLOOR
36"
8"
42.75"
33"
OPEN STORAGE
86" X 8" X .5"
POLY CUTTING BOARD
PLATE SHELF
86"
OPEN STORAGE
PLATE SHELF
72" X 8" X .5"
POLY CUTTING BOARD
72"
OPEN STORAGE
PLATE SHELF
60" X 8" X .5"
POLY CUTTING BOARD
60"
OPEN STORAGE
PLATE SHELF
48" X 8" X .5"
POLY CUTTING BOARD
48"
DL
J
WI
OPEN STORAGE
PLATE SHELF
30" X 8" X .5"
POLY BOARD
30"
29
" DEEP EQUIPMENT
Length
Height* 36" 36" 36" 36" 36"
30" 48" 60" 72" 86"
Wells 2 3 4 5 6
Elements 1 1 2 2 2
Ship Wt. 213 lbs. 294 lbs. 365 lbs. 421 lbs. 477 lbs.
208 Volt Models
K.W. 3 3 6 6 6
Amps 14.4 14.4 28.8 28.8 28.8
240 Volt Models
K.W. 3 3 6 6 6
Amps 12.5 12.5 25 25 25
* All models with adjustable and movable legs for 35 1/2
Randell, Unified Brands 888-994-7636, fax 888-266-5244
" to 36 3/4" work height.
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
33
" DEEP EQUIPMENT
Length
Model No. 33330 33348 33360 33372 33386
30" 48" 60" 72" 86"
Height* 36" 36" 36" 36" 36"
Wells 2 3 4 5 6
Elements 1 1 2 2 2
Ship Wt. 213 lbs. 294 lbs. 365 lbs. 421 lbs. 477 lbs.
208 Volt Models
K.W. 3 3 6 6 6
Amps 14.4 14.4 28.8 28.8 28.8
240 Volt Models
K.W. 3 3 6 6 6
Amps 12.5 12.5 25 25 25
Page 23
Custom Open Base Gas Hot Food Table models 34000
model 34330 34348 34360 34372 34386
Description:
Open shelving base hot food table with 16 gauge stainless top,
and integral backsplash with 45˚ return. Individual die-stamped
12 x 20 top openings, 18 gauge stainless steel common water
bath tank with 20,000 BTU gas burner and safety system. 1/4"
steel heat dispersion tank shield, and 8" deep plate shelf. Drain,
gate valve and fill faucet provided. 6" high adjustable and
movable legs.
Specifications:
UNIT TOP: Top to be one piece of die formed 16 gauge stainless
steel with 2 5/8" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top
fitted with recessed heavy duty steel bars for field bolting units
together, producing a hairline seam. Top stamped with individual
12 x 20 die-formed raised perimeter openings. Swivel fill faucet
provided. Unit with 8" deep, removable 18 gauge stainless steel
plate shelf, and 8" wide x 1/2" thick, full length NSF composition
workboard.
FOOD WELLS: 12" x 20" die formed raised perimeter openings
in stainless steel top. 20,000 BTU gas burner assemblies, as
required, with safety shut-off and pilot light system mounted
below one piece 18 gauge, 7" deep stainless steel water bath
tank to heat food wells. 1/4" cold rolled steel plate between
burner and tank for heat dispersion and tank protection. 1"
stainless steel drain nipple and gate valve provided.
CONTROLS: Controls for element(s) mounted on front of 8" deep
removable stainless steel plate shelf.
UNIT BASE: Body ends to be die-formed stainless steel, finished
and polished on the inside with corrosion resistant exterior.
Insulated nosing and insulated back wall provided. Bottom shelf
to be 22 gauge stainless steel with marine edge with integrally
welded channel bracing, and 8" coved cornered turn up at rear.
Legs to be 6" high stainless steel with adjustable bullet foot.
Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be
moved left to right to avoid floor obstacles during installation.
shown with optional finished end.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• Gas regulator
• 20,000 BTU gas burner with safety shut-off and pilot
light system as required. 20,000 natural gas - 17,000
propane.
• Individual die-stamped 12 x 20 openings hold pans
above common bath tank
• 18 gauge stainless steel tank with 1/4" steel heat
dispersion shield
• Drain, gate valve and swivel fill faucet provided
• 45˚ integral stainless backsplash providing access to
electrical chase is standard. 90˚ stainless backsplash
is optional.
Optional:
29” deep equipment
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 12
Revised 02/05
Page 24
34000 Series
COPPER 22" AFF.
TO 3/4 " SWEAT FIT
FROM REAR OF UNIT
GAS CONNECTION
STUB FROM REAR OF
UNIT TO 1/2" FPT AT
NATURAL GAS
LP GAS
20000 BTU'S
(1) BURNER,
CHECK ONE:
25" AFF
G
LEGEND FOR
HOT WATER
CONNECTION STUB
FROM REAR OF UNIT
1/2" COPPER @
8 1/2" AFF
CONNECTION STUB
AFF=ABOVE FIXED
DRAIN LINE
FLOOR
MODEL # 34000
HWO
WO
8"
33"
36"
42.75"
OPEN STORAGE
PLATE SHELF
86" X 8" X .5"
RICHLITE CUTTING BOARD
86"
OPEN STORAGE
PLATE SHELF
72" X 8" X .5"
RICHLITE CUTTING BOARD
72"
OPEN STORAGE
PLATE SHELF
60" X 8" X .5"
RICHLITE CUTTING BOARD
60"
OPEN STORAGE
48" X 8" X .5"
RICHLITE CUTTING BOARD
PLATE SHELF
48"
G
HWO
WO
OPEN STORAGE
PLATE SHELF
30" X 8" X .5"
RICHLITE BOARD
30"
27"
3"
4"
7"
15"
3"
29
Length
" DEEP EQUIPMENT
30" 48" 60" 72" 86"
Height* 36" 36" 36" 36" 36"
Wells 2 3 4 5 6
Burners 1 1 2 2 2
BTU’s Nat Gas 20000 20000 40000 40000 40000
BTU’s LP Gas 17000 17000 34000 34000 34000
Ship Wt. 215 lbs. 290 lbs. 370 lbs. 424 lbs. 478 lbs.
* All models with adjustable and movable legs for 35 1/2
Randell, Unified Brands 888-994-7636, fax 888-266-5244
" to 36 3/4" work height.
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
33
" DEEP EQUIPMENT
Length
Model No. 34330 34348 34360 34372 34386
30" 48" 60" 72" 86"
Height* 36" 36" 36" 36" 36"
Wells 2 3 4 5 6
Burners 1 1 2 2 2
BTU’s Nat Gas 20000 20000 40000 40000 40000
BTU’s LP Gas 17000 17000 34000 34000 34000
Ship Wt. 215 lbs. 290 lbs. 370 lbs. 424 lbs. 478 lbs.
Page 25
Custom Hot Food Table Accessories
Telescoping Roll Covers
18 gauge stainless steel telescoping cover with hinge pins in frictionfree nylon bushings. Chrome plated
handle is provided. Stainless steel
condensation frame provided to
direct drippage into heated well.
Adaptor Plates
Stainless steel plate with edges
turned down, and cut-outs for inserts. (Inserts by others).
Counter Protector
Stainless steel tubular frame assembly with removable glass panels on
top, back, and sides. Glass rimmed
with stainless steel molding, mounted to allow cleaning of unit top.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 13
Revised 09/04
Page 26
blank page
Page 27
Custom Remote Full View Display Case models 43000A
model 43350A 43362A 43374A 43250PA 43262PA 43274PA
43350PA 43362PA 43374PA
Description:
Remote refrigerated display unit with insulated self-closing glass
doors in upper display structure. Display area with stainless
steel interior, (2) angled display mirrors, (4) display shelves
and side mounted illumination. Refrigerated storage base with
service ledge and stainless steel doors on concealed hinges.
Evaporator blower coils with expansion valve, and refrigeration
lines supplied and installed. Condensing unit and controls not
provided. Unit has 6" high adjustable and movable legs. Available
as a Pass-Thru unit.
Specifications:
CABINET EXTERIOR: Cabinet body is constructed of all metal. Service
ledge to be one piece of die-formed 16 gauge stainless steel with 2
1/2" nosing. Ends at top fitted with recessed heavy duty steel bars for
field bolting units together, producing a hairline seam. Upper display
structure; to have stainless steel exterior and interior sides. Self-closing,
thermalpane glass doors that are easily removable for cleaning, riding in
nylon track. Base; Door opening frames to be ABS and contain magnetic
strip for positive sealing of gaskets. Exterior body to be painted corrosion
resistant steel. Unit totally prewired to junction box. Legs to be 6" high
with adjustable bullet foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of assembly. Legs to be
movable left to right to avoid floor obstacles.
model 43250A shown
REFRIGERATION: Base and upperstructure supplied with separate refrigeration
coils. Expansion valve and refrigeration lines provided and installed for connection
at
unit rear (specify refrigerant if other than R-134a). Condensing unit and controls
not provided. Unit totally prewired and to be supplied with 8' cordset for 115V plugin operation.
PASS THRU Model Same as above except to have (2) sets of self-closing
doors, and no angled display mirrors or mirrored back. (4) fluorescent
fixtures-(2) per side provided.
CABINET INTERIOR: Upper display structure; (4) powder coated wire
shelves provided, with (2) angled display mirrors. Illumination to be
provided by (2) fluorescent fixtures, (1) per side, removable without
the need for tools. Base; interior to be ABS thermoplastic at ends
only. Stainless steel interior liner to be coved cornered to form bottom
and back. One powder coated finished shelf provided behind each
door. Upperstructure, and base with high density, CFC free, urethane
expanding foam.
UPPER DOORS: (2) removable, insulated sliding glass doors are selfclosing on ball bearings riding in nylon track for smooth operation.
Rubber wiper between doors to minimize air loss, and vinyl frame to
reduce condensation. Door locking system is standard. Doors are easily
removed for cleaning.
BASE DOORS: Stainless steel front with easy to grasp stainless handles,
mounted on heavy duty concealed hinges. Hinges are all stainless steel
with bronze pivot pin in nylon bushing, spring loaded to be self-closing.
Doors with foamed in place insulation, and magnetic gaskets.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Standard Features:
• Evaporator blower coils with expansion valve and
refrigeration lines provided and installed for use with R-134a
refrigerant (specify otherwise)
• Display area illuminated from sides for shadow free display
• Fluorescent illumination
• Adjustable shelving
• Insulated glass doors are self-closing and easily removed for
cleaning
• Foamed in place “CFC free” urethane insulation
• Separate coil for upperstructure for more effective cooling of
display area
• 6" high legs—adjustable and movable
• Filter dryer installed on liquid line
Randell Custom, Page 14
Revised 07/06
Page 28
43000A Series
P
A
N
E
L
21"REFRIG 21"REFRIG
27" REFRIG. 27" REFRIG.
P
A
N
E
L
21"REFRIG 21"REFRIG 24"REFRIG
P
A
N
E
L
50" 62" 74"
29" or 33”
25.25"
44"
80"
36"
26.5"
LEGEND FOR
MODEL #43000A/PA
AFF = ABOVE FIXED FLOOR
AT 8 1/2 " AFF
LINE 8 1/2 " AFF.
120V-60-1PH-6.0 Amps
HARDWIRE CONNECTION
CONDENSATE DRAIN 1/2 "
1/4" LIQUID, 3/8" SUCTION
JUNCTION BOX 6 1/2" AFF.
C
L
J
OC
OR
J
OR OC
C
L
P
A
N
E
L
21"REFRIG 21"REFRIG
27" REFRIG. 27" REFRIG.
P
A
N
E
L
MODEL 50” A/PA = 4500 BTU’s
MODEL 62” A/PA = 5450 BTU’s
MODEL 74” A/PA = 5450 BTU’s
21"REFRIG 21"REFRIG 24"REFRIG
P
A
N
E
L
50" 62" 74"
29" or 33”
25.25"
44"
80"
36"
26.5"
44"
36"
80"
35"
26.5"
44"
80"
36"
25.25"
33"
80"
44"
36"
25.25"
29"
44"
80"
36"
26.5"
31"
44"
36"
80"
25.25"
33"
80"
44"
36"
25.25"
29"
80"
44"
36"
31"
36"
26.5"
44"
80"
26.5"
35"
44"
36"
80"
43000A-29 SERIES 43000A-33 SERIES
43000PA-33 SERIES
43000PA-29 SERIES
C
L
J
OR OC
C
L
27" REFRIG. 27" REFRIG.
P
A
N
E
L
21"REFRIG 21"REFRIG 24"REFRIG
P
A
N
E
L
29" or 33”
25.25"
44"
80"
36"
26.5"
44"
80"
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 29
FULL VIEW DISPLAY CASE DOOR OPENING SIZES - INTERIOR DEPTHS
Clearances Through Door Interior Depth Behind
Unit Length Lt. to Rt. Top to Bottom
Sliding Glass Door
50" 18 3/4" 32" 19 1/4"
62" 24 3/4" 32" 19 1/4"
74" 30 3/4" 32" 19 1/4"
Models Length Height No. of Doors No. of 4" dp. pans in base top H.P./Refrigerant Amps. Volt/Cycle/Phase NEMA BTU Capacity Ship Wt. - lbs
33" Deep Models
43350A 50" 80" (2) 21" (4) 1/2 1/2 hp/134a 6 115/60/1 5-15P 2395 593
43362A 62" 80" (2) 27” (4) 1/2 (1) 1/3 1/2 hp/134a 6 115/60/1 5-15P 3099 678
43374A 74" 80" (2) 21" (1) 24” (6) 1/2 3/4 hp/134a 6 115/60/1 5-15P 3495 764
PASS THRU MODELS
31" Deep Models
43250PA 50" 80" (2) 21" (4) 1/2 1/2 hp/134a 6 115/60/1 5-15P 4019 593
43262PA 62" 80" (2) 27” (4) 1/2 (1) 1/3 1/2 hp/134a 6 115/60/1 5-15P 4725 678
43274PA 74" 80" (2) 21" (1) 24” (6) 1/2 3/4 hp/134a 6 115/60/1 5-15P 5342 764
35" Deep Models
43350PA 50" 80" (2) 21" (4) 1/2 1/2 hp/134a 6 115/60/1 5-15P 4019 593
43362PA 62" 80" (2) 27” (4) 1/2 (1) 1/3 1/2 hp/134a 6 115/60/1 5-15P 4725 678
43374PA 74" 80" (2) 21" (1) 24” (6) 1/2 3/4 hp/134a 6 115/60/1 5-15P 5342 764
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 30
Page 31
Custom SC Full View Display Case models 44000A
model 44350A 44362A 44374A 44250PA 44262PA 44274PA
44350PA 44362PA 44374PA
Description:
Self-contained refrigerated display unit with insulated selfclosing doors in upper display structure. Display area with
stainless steel interior, (2) angled display mirrors, (4) display
shelves and side mounted illumination. R-134a forced air
refrigeration system with expansion valve and thermostatic
control. Refrigerated storage base with service ledge. Foamed
in place, “CFC free” insulation and cordset for 115V operation.
Unit has 6" high adjustable and movable legs. Available as a
Pass-Thru unit.
Specifications:
CABINET EXTERIOR: Cabinet body is constructed of all metal.
Service ledge to be one piece of die-formed 16 gauge stainless
steel finish with 2 1/2" nosing. Ends at top fitted with recessed
heavy duty steel bars for field bolting units together, producing
a hairline seam. Upper display structure; to have stainless steel
exterior and interior sides. Self-closing, thermalpane glass doors
that are easily removable for cleaning, riding in nylon track.
Base; Door opening frames to be ABS and contain magnetic
strip for positive sealing of gaskets. Exterior body to be corrosion
resistant steel. Louver panel to be die-stamped stainless steel.
Unit totally prewired to junction box. Legs to be 6" high stainless
steel with adjustable bullet foot. Legs mounted to full length
channel frame assembly which is integrally welded to bottom
of body assembly. Legs can be moved left to right to avoid floor
obstacles during installation.
CABINET INTERIOR: Upper display structure; (4) powder
coated wire shelves provided, with (2) angled display mirrors.
Illumination to be provided by (2) fluorescent fixtures, (1) per
side, removable without the need for tools. Base; interior to be
ABS thermoplastic at ends only. Stainless steel interior liner to
be coved cornered to form bottom and back. One powder coat
finished shelf provided behind each door. Upperstructure, and
base with high density, CFC free, urethane expanding foam.
DOORS: Stainless steel fronts with easy to grasp stainless
handles, mounted on heavy duty concealed hinges. Hinges are
all stainless steel with bronze pivot pin in nylon bushing, spring
loaded to be self-closing. Doors with foamed in place insulation,
and magnetic gaskets.
model 44250A shown
blower coils, blower coils fitted with expansion valves for fast recovery
and thermostatic control for field adjustability. Condensing unit sized and
installed for proper cooling in housing at left end. Optional condensate
evaporator to be installed in compressor airflow. Unit totally prewired
and to be supplied with 8' cordset for 115V plug-in operation.
PASS THRU Model Same as above except to have (2) sets of self-closing
doors, and no angled display mirrors or mirrored back. (4) fluorescent
fixtures-(2) per side provided.
Standard Features:
• Self-contained refrigeration system that utilizes “CFC free”
R-134a refrigerant
• Display area illuminated from sides for shadow free display
• Fluorescent illumination
• Adjustable shelving
• Insulated glass doors are self-closing and easily removed
for cleaning
• Foamed in place “CFC free” urethane insulation
• Separate coil for upperstructure for more effective cooling of
display area
• 6" high legs—adjustable and movable
REFRIGERATION: Base and upperstructure supplied with
separate refrigeration coils. R-134a refrigeration system to
include condensing unit installed with high capacity evaporator
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 15
Revised 07/06
Page 32
115V-60-1PH
JUNCTION BOX 26" AFF.
AFF = ABOVE FIXED FLOOR
MODEL #44000A
LEGEND FOR
AT 10" AFF
CONDENSATE DRAIN 1/2 "
hp COMPRESSOR
(NEMA #5-15P)
8' LONG CORD SET
OC
J
HP
25.25"
33"
80"
44"
36"
31"
35"
26.5"
44"
80"
36"
J
HP
OC
27" REFRIG. 27" REFRIG.
74"
18"REFRIG.
27"REFRIG.
62"
27" REFRIG.
C
I
O
L
50"
17"
13"
44000A Series
35"
26.5"
44"
80"
36"
25.25"
33"
80"
44"
36"
25.25"
29"
44"
80"
36"
26.5"
31"
44"
36"
80"
25.25"
33"
80"
44"
36"
25.25"
29"
80"
44"
36"
31"
36"
26.5"
44"
80"
26.5"
35"
44"
36"
80"
44000A-29” DEEP 44000A-33” DEEP
44000PA-35” DEEP
44000PA-31” DEEP
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 33
FULL VIEW DISPLAY CASE DOOR OPENING SIZES - INTERIOR DEPTHS
Clearances Through Door Interior Depth Behind
Unit Length Lt. to Rt. Top to Bottom
Sliding Glass Door
50" 18 3/4" 32" 19 1/4"
62" 24 3/4" 32" 19 1/4"
74" 30 3/4" 32" 19 1/4"
29" Deep Models Length Height No. of Doors No. of 4" dp. pans in base top H.P./Refrigerant Amps. Volt/Cycle/Phase NEMA BTU Capacity Ship Wt. - lbs
44250A 50" 80" (1) 27" (4) 1/2 1/2 hp/134a 11.1 115/60/1 5-15P 3932 593
44262A 62" 80" (1) 18" (1) 27" (4) 1/2 (1) 1/3 1/2 hp/134a 11.5 115/60/1 5-15P 4322 746
44274A 74" 80" (2) 27" (6) 1/2 3/4 hp/134a 15.1 115/60/1 5-20P 5793 834
33" Deep Models
44350A 50" 80" (1) 27" (4) 1/2 1/2 hp/134a 11.1 115/60/1 5-15P 3932 593
44362A 62" 80" (1) 18" (1) 27" (4) 1/2 (1) 1/3 1/2 hp/134a 11.5 115/60/1 5-15P 4322 746
44374A 74" 80" (2) 27" (6) 1/2 3/4 hp/134a 15.1 115/60/1 5-20P 5793 834
PASS THRU MODELS
31" Deep Models
44250PA 50" 80" (1) 27" (4) 1/2 1/2 hp/134a 11.1 115/60/1 5-15P 4170 593
44262PA 62" 80" (1) 18" (1) 27" (4) 1/2 (1) 1/3 1/2 hp/134a 11.5 115/60/1 5-15P 4170 746
44274PA 74" 80" (2) 27" (6) 1/2 3/4 hp/134a 15.1 115/60/1 5-20P 5541 834
35" Deep Models
44350PA 50" 80" (1) 27" (4) 1/2 1/2 hp/134a 11.1 115/60/1 5-15P 4170 593
44362PA 62" 80" (1) 18" (1) 27" (4) 1/2 (1) 1/3 1/2 hp/134a 11.5 115/60/1 5-15P 4170 746
44374PA 74" 80" (2) 27" (6) 1/2 3/4 hp/134a 15.1 115/60/1 5-20P 5541 834
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 34
Page 35
Custom SC Worktop Refrigerator models 51000A
model 51338A 51341A 51344A 51347A 51356A 51359A 51362A
51365A 51368A 51377A 51380A 51383A 51386A 51389A
51395A
Description:
Self-contained refrigerated worktop unit with 16 gauge
reinforced stainless steel top, and integral backsplash with
45˚ return. Stainless steel doors on concealed hinges. CFC
free, R-134a refrigeration system. Evaporator blower coil with
expansion valve supplied and installed. 6" high adjustable and
movable legs.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4".
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Hinged louver
panel to be stainless steel. Exterior body to be corrosion resistant
steel. Door opening frames are ABS and contain magnetic strip
for positive seal of door gaskets. Work surface to be at 36" work
height. Legs to be 6" high stainless steel with adjustable bullet
foot. Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be
moved left to right to avoid floor obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends
only. Stainless steel interior liner to be coved cornered to form
bottom, back and top. One baked enamel finished shelf provided
behind each door. Unit insulation to be CFC free foamed in place
urethane.
DOORS: Door fronts to be 22-gauge stainless steel exterior front
with 16 gauge stainless steel door pulls/handles. The interior
liner is vacuumed formed ABS with integral gasket retainer
for easy cleaning and accepts Randell’s Exclusive Press Fit
Gasket system. Doors are mounted on concealed hinges. One
removable wire shelf is supplied behind each door.
REFRIGERATION: Refrigeration system utilizes “CFC free” R-134a
refrigerant. Condensing unit sized and installed for proper cooling
in housing at left end. Interior fitted with Randell evaporator blower
coil for cooling base. Blower coil fitted with expansion valve for
fast recovery and thermostatic control for field adjustability. Unit
totally prewired and to be supplied with 8' cordset (NEMA 5-15P)
for 115V operation. Hot gas condensate evaporator.
model 51362A shown with
optional finished end
Standard Features:
• Available under one piece top with other modular equipment
up to 16' in length
• 6" high legs—adjustable and movable
• Foamed in place “CFC free” urethane insulation
• Refrigeration system utilizes “CFC free” R-134a refrigerant,
expansion valve for fast recovery, and thermostatic control
for field adjustability
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
• Front breathing louver design allows sealing to wall & curb
mounting without special requirements
Options & Accessories:
Patented Drawer Cartridge Systems - Exclusive
Randell Feature + 3 years parts & labor warranty!
No Backsplash for dual sided / Cafeteria Operation
Tray racks for sheet pans (33" dp., 24" doors only)
Cutting boards
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Over-shelving storage options
Compressor on right option
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 16a
Revised 07/06
Page 36
51000A Series
51000 SERIES (COMPRESSOR LEFT) SELF-CONTAINED REFRIGERATORS WITH STAINLESS STEEL TOPS
Length
Model 33" 51338A 51341A 51344A 51347A 51356A 51359A 51362A 51365A 51368A
# of doors (1) 24" (1) 21" +
Min. Compr. Hsg. 14" 14" 14" 14" 14" 14" 14" 14" 14"
Storage Cu. Ft.
33”
Storage Cu. Ft.
29”
H.P./Refrigerant 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a
Amps 5.2 5.2 5.2 5.2 6.6 6.6 6.6 6.6 6.6
Storage Cu. Ft.
22”
H.P./Refrigerant 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a
Amps 5.2 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. - lbs. 365 380 395 410 450 465 480 495 510
BTU Design load 374 403 431 460 689 718 746 775 804
BTU System Cap. 1539 1539 1703 1703 1703 1703 1703 1703 1703
Length
Model 33" 51377A 51380A 51383A 51386A 51389A 51395A
# of doors (3) 21" (2) 21", (1)
Min. Compr. Hsg. 14" 14" 14" 14" 14" 14"
Storage Cu. Ft.
33"
Storage Cu. Ft.
29"
H.P./Refrigerant 1/3hp/134a 1/3hp/134a 1/3hp/134a 1/3hp/134a 3/8hp/134a 3/8hp/134a
Amps 6.6 6.6 6.6 6.6 9.2 9.2
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. - lbs. 555 570 585 600 630 660
BTU Design load 1033 1061 1090 1119 1148 1206
BTU System Cap. 2124 2124 2124 2124 3111 3111
38" 41" 44" 47” 56" 59" 62" 65" 68"
(1) 24" +
6" coil hsg.
5.21 6.18 7.16 8.14 11.07 12.04 13.02 14 14.97
4.38 5.20 6.02 6.84 9.30 10.12 10.94 11.7 12.58
2.8 3.5 4.2 4.9 7.1 7.8 8.5 9.3 10.0
77" 80" 83" 86" 89" 95"
24"
17.9 18.86 19.86 20.83 20.51 22.46
15.04 15.36 16.68 17.50 17.23 18.89
6" coil hsg.
(2) 24", (1)
21"
(1) 27" + 6"
coil hsg.
(3) 24" (2) 24" (3) 27"
(2) 21" (1) 21", (1)
24"
(2) 24" (1) 24" (2) 27"
NOTE:
If drop-in lowerators are to be installed in this equipment, the overall length of the tube should be no more than 24".
BTU load and capacity ratings based on 100F ambient.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 37
51000A Series
LEGEND FOR
MODEL # 51000A
AFF = ABOVE FINISHED
FLOOR
HP COMPRESSOR
JUNCTION BOX 26" AFF
115V/60Hz/1Ph
8' LONG CORD SET
(NEMA #5-15P)
HP
21"REFRIG21"REFRIG 21"REFRIG
77"
27"REFRIG 27"REFRIG
68"
27"REFRIG24"REFRIG
65"
24"REFRIG 24"REFRIG
62"
21"REFRIG 24"REFRIG
59"
21"REFRIG21"REFRIG
56"
27"REFRIG
C
47"
C
24"REFRIG
44"
C
21"REFRIG
41"
24"REFRIG
38"
OC
J
HP
COMPR. HSG.
14"
13"
42.75"
36"
33"
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 16b
Page 38
51000A Series
21"REFRIG24"REFRIG 21"REFRIG
80"
27"REFRIG 27"REFRIG 27"REFRIG
95"
24"REFRIG27"REFRIG 24"REFRIG
89"
24"REFRIG 24"REFRIG24"REFRIG
86"
24"REFRIG24"REFRIG 21"REFRIG
83"
DOOR OPENING SIZES - INTERIOR DEPTHS
Clearances Through Door Interior Depth Behind Door
Door Width Lt. to Rt. Top to Bottom (unit depths in parentheses)
18" 13 1/4" 20 1/4" (33
21" 16 1/4" 20 1/4" (33
24" 19 1/4" 20 1/4" (33
27" 22 1/4" 20 1/4" (33
•Shelf depth is 25 1/4" on 33
and 14
1/2
" on 22" deep equipment.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
" deep equipment, 21
")-26"
")-26"
")-26"
")-26"
1/4" on 29
(29
")-22"
(29
")-22"
(29
")-22"
(29
")-22"
" deep equipment,
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
(22
")-
15.5
"
(22
")-
15.5
"
(22
")-
15.5
"
(22
")-
15.5
"
Page 39
Custom SC Raised Coldwall Refrigerator models 51000PR
model 51338PR 51341PR 51344PR 51347PR 51356PR 51359PR 51362PR
51365PR 51368PR 51377PR 51380PR 51383PR 51386PR 51389PR
51395PR 513114PR 513126PR
Description:
Self-contained refrigerator storage unit with mechanically cooled
raised rail. These units are offered in a variety of lengths to
meet your specific base storage or pan storage requirements.
The mechanically cooled pan opening uses Randell’s exclusive
design technologies, such as our Exclusive Refrigerated Raised
Rail Thermostat, allowing customers to make adjustments to the
rail temperatures (independent of the base). Automatic hot gas
evaporator is provided for eliminating the base coil’s condensation.
The rail is designed to be a manual defrost system and allows the
operator to shut the rail off while leaving the base operational.
model 51362PR shown with
optional finished end
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Ends at top fitted with recessed
heavy duty steel bars for field bolting units together, producing a
hairline seam. Hinged louver panel to be stainless steel. Exterior
body to be corrosion resistant steel. Door opening frames are ABS
and contain magnetic strip for positive seal of door gaskets. Work
surface to be at 36" work height. Legs to be 6" high stainless steel
with adjustable bullet foot. Legs mounted to full length channel
frame assembly which is integrally welded to bottom of body
assembly. Legs can be moved left to right to avoid floor obstacles
during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.
Stainless steel interior liner to be coved cornered to form bottom, back
and top. One baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.
DOORS: Door fronts to be 22-gauge stainless steel exterior front
with 16 gauge stainless steel door pulls/handles. The interior liner
is vacuumed formed ABS with integral gasket retainer for easy
cleaning and accepts Randell’s Exclusive Press Fit Gasket system.
Doors are mounted on concealed hinges. One removable wire shelf
is supplied behind each door.
REFRIGERATION: System is a balanced heavy duty R-404A
refrigerant system with an energy efficient hot gas automatic defrost
(for base evaporator coil). The base is cooled by an independent
blower coil operating on its own expansion valve and thermostat and
operates through a dedicated solenoid valve. The rail is provided
with a pressure control to operate the condensing unit on demand;
and a rail thermostat (located in the compressor housing) making it
easily adjustable for specific ambient conditions without effecting
the balance of the system. An on/off switch for the rail is located
behind the hinged louver panel.
Standard Features:
• Low profile 2” recess pan design provides easy reach and optimal pan
temperatures & reliability
• Balanced high capacity refrigeration system with expansion valve
metering-able to handle peak period demands
• Front breathing compressor housing with directed air flow
• Easy maintenance press-fit gaskets
• Raised rail thermostat
• Drain in rail for easy cleaning
• Hinged louver for easy access
• 6" high legs—adjustable and movable
• Foamed in place “CFC free” urethane insulation
• Hinged removable stainless steel covers
• Automatic base defrost with hot gas evaporator
• Available up to 16’ under one common assembly
• Adapter bars standard to accommodate a compliment of 1/6 size pans
• Front breathing louver design allows sealing to wall & curb
mounting without special requirements
Options & Accessories:
Patented Drawer Cartridge Systems - Exclusive
Randell Feature + 3 years parts & labor warranty!
Partial length rails
Flat-top rails (non-angled) for use in display type kitchens
Ambient fighting hood design with slide back cover
Hinged slide back removable cover
Lift-off (removable) night covers
Tray racks for sheet pans (33" dp., 24" doors only)
Cutting boards
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Over-shelving storage options
Compressor on right option
Wide pan rail
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 17a
Revised 09/04
Page 40
51000PR Series
51000PR SERIES (COMPRESSOR LEFT) SELF-CONTAINED REFRIGERATORS WITH STANDARD DEPTH RAISED RAIL
Length
Model 33" 51338PR 51341PR 51344PR 51347PR 51356PR 51359PR 51362PR 51365PR 51368PR
# of doors (1) 24" (1) 21" +
Min. Compr. Hsg. 14" 14" 14" 14" 14" 14" 14" 14" 14"
# Pans (6-8) 1/6 (6-10) 1/6 (10) 1/6 (12) 1/6 (6-14) 1/6 (8-14) 1/6 (8-16) 1/6 (8-16) 1/6 (8-16) 1/6
Min. Length of Rail
Storage Cu. Ft.
33”
Storage Cu. Ft.
29”
Work surface
Depth 33”
H.P./Refrigerant 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a
Amps 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. - lbs. 456 475 494 513 563 581 600 619 638
BTU Design load 235/272 294/294 294/294 353/338 412/503 412/525 470/547 470/569 529/591
BTU System Cap. 1006/2090 1109/2040 1109/2141 1201/2141 1283/2141 1283/2141 1356/2141 1356/2141 1423/2141
38" 41" 44" 47” 56" 59" 62" 65" 68"
(1) 24" +
6" coil hsg.
27” 27” 27” 27” 27”
4.63 5.50 6.37 7.23 9.84 10.71 11.57 12.44 13.31
3.89 4.62 5.35 6.08 8.26 8.99 9.72 10.45 11.18
14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide
6" coil hsg.
(1) 27" +
6" coil hsg.
(2) 21" (1) 21", (1)
24"
34” 34” 34” 34”
(2) 24" (1) 24", (1)
27”
(2) 27"
Length
Model 33" 51377PR 51380PR 51383PR 51386PR 51389PR 51395PR 513114PR 513126PR
# of doors (3) 21" (2) 21", (1)
Min. Compr. Hsg. 14" 14" 14" 14" 14" 14" 18" 18"
# Pans (10-18) 1/6 (10-18) 1/6 (10-20) 1/6 (10-20) 1/6 (10-22) 1/6 (12-20) 1/6 (14-26) 1/6 (14-30) 1/6
Min. Length of Rail
Storage Cu. Ft.
33"
Storage Cu. Ft.
29"
Work surface
Depth 33”
H.P./Refrigerant 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 5/8hp/404a 3/4hp/404a
Amps 12 12 12 12 12 12 12.8 12.8
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-20P 5-20P
Ship Wt. - lbs. 703 723 741 760 798 835 939 1014
BTU Design load 588/755 588/777 647/799 647/821 706/843 764/887 882/1095 1000/1184
BTU System Cap. 1866/3319 1866/3319 1966/3319 1966/3319 2061/3319 2151/3319 2735/3946 3330/6435
77" 80" 83" 86" 89" 95" 114" 126"
(2) 24", (1)
24"
41” 41” 41” 41” 41”
15.91 16.78 17.65 18.52 19.39 21.12 25.46 27.78
13.37 14.10 14.83 15.56 16.28 17.74 21.39 23.33
14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide
21"
(3) 24" (2) 24", (1)
27”
(3) 27" (4) 24" (4) 27"
48”
55”
55”
NOTE:
Pan capacity reflected is the actual amount of pans that are clearly accessible by the operator. Units with multiple covers may actually have
additional pan capacity that is partially obstructed by the cover divider/mullion.
BTU load and capacity ratings based on 86F ambient.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 41
51000PR Series
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 17b
Page 42
51000PR Series
DOOR OPENING SIZES - INTERIOR DEPTHS
Clearances Through Door Interior Depth Behind Door
Door Width Lt. to Rt. Top to Bottom (unit depths in parentheses)
18" 13 1/4" 20 1/4" (33
21" 16 1/4" 20 1/4" (33
24" 19 1/4" 20 1/4" (33
27" 22 1/4" 20 1/4" (33
•Shelf depth is 25 1/4" on 33
and 14
1/2
" on 22" deep equipment.
" deep equipment, 21
")-26"
")-26"
")-26"
")-26"
1/4" on 29
(29
")-22"
(29
")-22"
(29
")-22"
(29
")-22"
" deep equipment,
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
(22
(22
(22
(22
")")")")-
15.5
15.5
15.5
15.5
"
"
"
"
Page 43
Custom SC Recessed Coldwall Refrigerator models 51000PO
model 51341PO 51344PO 51347PO 51356PO 51359PO 51362PO 51365PO
51368PO 51377PO 51380PO 51383PO 51386PO 51389PO 51395PO
513114PO 513126PO
Description:
Self-contained refrigerator storage units with mechanically
cooled pan opening. These units are offered in variety of lengths
to meet your specific base storage or pan storage requirements.
The mechanically cooled pan opening uses Randell’s exclusive
design technologies, such as our Exclusive Refrigerated Pan
Opening Thermostat allowing customers to make adjustments
to the opening temperatures (independent of the base).
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2” nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4”.
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Hinged louver
panel to be stainless steel. Exterior body to be corrosion resistant
steel. Door opening frames are ABS and contain magnetic strip
for positive seal of door gaskets. Work surface to be at 36” work
height. Legs to be 6” high stainless steel with adjustable bullet
foot. Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be
moved left to right to avoid floor obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends
only. Stainless steel interior liner to be coved cornered to form
bottom, back and top. Unit insulation to be CFC free foamed in
place urethane.
DOORS: Door fronts to be 22-gauge stainless steel exterior front
with 16 gauge stainless steel door pulls/handles. The interior
liner is vacuumed formed ABS with integral gasket retainer for
easy cleaning and accepts Randell’s Exclusive Press Fit Gasket
System. Doors are mounted on concealed hinges.
REFRIGERATION: System is a balanced heavy duty R-404A
refrigerant system with an energy efficient hot gas automatic defrost
(for base evaporator coil). The base is cooled by an independent
blower coiled operating on its own expansion valve and thermostat
and operates through a dedicated solenoid valve. The rail is provided
with a pressure control to operate the condensing unit on demand
and a rail thermostat (located in the compressor housing) making it
easily adjustable for specific ambient conditions without effecting
the balance of the system. An on/off switch for the rail is located
behind the hinged louver panel.
model 51362PO shown with
optional finished end
Standard Features:
• Low profile 2” recess pan design provides easy reach and optimal pan
temperatures & reliability
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air flow A Randell Exclusive.
• Easy maintenance Press-Fit gaskets - A Randell Exclusive
• Pan opening thermostat- A Randell Exclusive
• Drain in pan opening for easy cleaning
• Hinged louver for easy access
• Hinged Removable stainless steel covers
• Foamed in place urethane insulation providing superior insulation and durability
• 6” high adjustable legs, moveable left to right if needed
• Available up to 16’ under one common assembly
• Adapter bars are standard to accommodate a compliment of 1/6 size pans
• Front breathing louver design allows sealing to wall & curb mounting without
special requirements
Options & Accessories:
Hinged slide back cover
Lift-off (removable) night covers
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Over-shelving storage options
Wide pan opening
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 18a
Revised 09/04
Page 44
51000PO Series
51000PO SERIES (COMPRESSOR LEFT) SELF-CONTAINED REFRIGERATORS WITH STANDARD DEPTH RECESSED PAN OPENING
Length
Model 33" 51341PO 51344PO 51347PO 51356PO 51359PO 51362PO 51365PO 51368PO
# of doors (1) 21" + 6"
Min. Compr. Hsg. 14" 14" 14" 14" 14" 14" 14" 14"
# Pans (6-10) 1/6 (6-10) 1/6 (6-10) 1/6 (6-14) 1/6 (8-14) 1/6 (8-16) 1/6 (8-16) 1/6 (8-16) 1/6
Min. Length of
Opening
Storage Cu. Ft. 4.31 4.99 5.67 7.71 8.39 9.07 9.75 10.43
Cutting Board
Width
H.P./Refrigerant 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a
Amps 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. - lbs. 418 435 451 495 512 528 545 561
BTU Design load 294/262 294/283 353/304 412/445 412/467 470/488 470/509 529/531
BTU System Cap. 1109/2141 1109/2141 1201/2141 1283/2141 1283/2141 1356/2141 1356/2141 1423/2141
Length
Model 33" 51377PO 51380PO 51383PO 51386PO 51389PO 51395PO 513114PO 513126PO
# of doors (3) 21" (2) 21", (1)
Min. Compr. Hsg. 14" 14" 14" 14" 14" 14" 18" 18"
# Pans (10-18) 1/6 (10-18) 1/6 (10-20) 1/6 (10-20) 1/6 (10-20) 1/6 (12-22) 1/6 (14-26) 1/6 (14-30) 1/6
Min. Length of
Opening
Storage Cu. Ft. 12.47 13.15 13.83 14.51 15.19 16.55 19.95 21.76
Cutting Board
Width
H.P./Refrigerant 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 5/8hp/404a 3/4hp/404a
Amps 12 12 12 12 12 12 12.8 12.8
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-20P 5-20P
Ship Wt. - lbs. 611 627 644 660 693 726 809 875
BTU Design load 588/671 588/693 647/714 647/735 706/757 764/799 882/983 1000/1068
BTU System
Cap.
41" 44" 47” 56" 59" 62" 65" 68"
(1) 24" + 6"
coil hsg.
27” 27” 27” 27”
10” Wide 10” Wide 10” Wide 10” Wide 10” Wide 10” Wide 10” Wide 10” Wide
77" 80" 83" 86" 89" 95" 114" 126"
41” 41” 41” 41” 41”
10” Wide 10” Wide 10” Wide 10” Wide 10” Wide 10” Wide 10” Wide 10” Wide
1866/3319 1866/3319 1966/3319 1966/3319 2061/3319 2151/3319 2735/3947 3330/6435
coil hsg.
24"
(1) 27" + 6"
coil hsg.
(2) 24", (1)
21"
(2) 21" (1) 21", (1)
24"
34” 34” 34” 34”
(3) 24" (2) 24", (1)
27”
(2) 24" (1) 24", (1)
27”
(3) 27" (4) 24" (4) 27"
48”
55”
(2) 27"
55”
NOTE:
Pan capacity reflected is the actual amount of pans that are clearly accessible by the operator. Units with multiple covers may actually have
additional pan capacity that is partially obstructed by the cover divider/mullion.
BTU load and capacity ratings based on 86F ambient.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 45
51000PO Series
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 18b
Page 46
51000PO Series
DOOR OPENING SIZES - INTERIOR DEPTHS
Clearances Through Door Interior Depth Behind Door
Door Width Lt. to Rt. Top to Bottom (unit depths in parentheses)
18" 13 1/4" 13 1/2" (33
21" 16 1/4" 13 1/2" (33
24" 19 1/4" 13 1/2" (33
27" 22 1/4" 13 1/2" (33
•Shelf depth is 25 1/4" on 33
and 14
1/2
" on 22" deep equipment.
" deep equipment, 21
")-26"
")-26"
")-26"
")-26"
1/4" on 29
(29
")-22"
(29
")-22"
(29
")-22"
(29
")-22"
" deep equipment,
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
(22
(22
(22
(22
")")")")-
15.5
15.5
15.5
15.5
"
"
"
"
Page 47
Custom SC Refrigerated Storage models 51000LPPO
model 51342LPPO 51350LPPO 51355LPPO 51367LPPO 51372LPPO 51375LPPO
51380LPPO 51385LPPO 51397LPPO
Description:
Self-Contained drawer base refrigerator storage units with mechanically
cooled pan opening. These units are offered in variety of lengths to meet
your specific base storage or pan storage requirements. The mechanically
cooled pan opening uses Randell’s exclusive design technologies, such as
our Exclusive Refrigerated Pan Opening Thermostat allowing customers
to make adjustments to the opening temperatures (independent of the
base). Automatic hot gas evaporator is provided for eliminating the base
coil’s condensation. The base is designed with a “low-profile” cabinet and
is supplied with a plate shelf above the refrigerated openings.
These units feature our Patented Drawer Cartridge Assembly.
A fully welded, unitized drawer cartridge assembly with a quick release
that allows the refrigerated drawers to be easily removed for cleaning.
This equipment is intended for use in rooms having an ambient tem-
perature of 86˚F (30˚C) or less.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top fitted with
recessed heavy duty steel bars for field bolting units together, producing
a hairline seam. Hinged louver panel to be stainless steel. Exterior body
to be corrosion resistant steel. Door opening frames are ABS and contain
magnetic strip for positive seal of door gaskets. Work surface to be at
36" work height. Legs to be 6" high stainless steel with adjustable
bullet foot. Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be moved left
to right to avoid floor obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.
Stainless steel interior liner to be coved cornered to form bottom, back
and top. One baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.
REFRIGERATED DRAWERS: Fully welded, unitized drawer cartridge
assembly - patented. Heavy duty full extension 14 gauge drawer tracks
on 1 5/8" heavy duty stainless steel bearings. Will accommodate (2)
12" x 20" x 4" deep pans per drawer (pans not included). Quick release
allows drawers to be easily removed for cleaning. Stainless fronts,
mounted to drawer cartridge assembly with easy to grasp drawer
handles. Drawers are self-closing with press fit magnetic gaskets (designed for installation & removal without tools).
REFRIGERATION: System is a balanced heavy duty R-404A refrigerant system with an energy efficient hot gas automatic defrost (for base evaporator
coil). The base is cooled by an independent blower coiled operating on its
own expansion valve and thermostat and operates through a dedicated
solenoid valve. A pressure control is provided to operate the condensing
unit on demand. The pan opening is provided with its own thermostat
(located in the compressor housing) making it easily adjustable for specific
ambient conditions without effecting the balance of the system. An on/off
switch for the pan opening is located above the louver panel.
model 51375LPPO shown with:
•optional finished end
•pan covers removed
•standard backsplash removed
Standard Features:
• “Low-profile” refrigerated cabinet with plate shelf above
• Low profile 2" recess pan design provides easy reach and
optimal pan temperatures & reliability
• Balanced (extra) high capacity refrigeration system with expansion valve
metering-able to handle peak period demands
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air flow-Randell Exclusive
• Patented Drawer Cartridge System with easy maintenance Press-Fit gaskets
- A Randell Exclusive
• Pan opening thermostat- A Randell Exclusive
• Drain in pan opening for easy cleaning
• Hinged louver for easy access
• Hinged Removable stainless steel covers
• Automatic base defrost with hot gas evaporator
• Foamed in place urethane insulation providing superior insulation
and durability
• 6" high adjustable legs, moveable left to right if needed
• Available up to 16' under one common ass'y
• Adapter bars are standard to accommodate a compliment of 1/6 size pans
• Front breathing louver design allows sealing to wall & curb
mounting without special requirements
Options & Accessories:
Hinged slide-back removable covers
Lift-Off (removable) night covers
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Wide pan opening
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 19a
Revised 09/04
Page 48
5100OLPP0 Series
51000LPPO SERIES (compressor left) SELF-CONTAINED DRAWER BASE REFRIGERATORS WITH STANDARD DEPTH RECESSED PAN OPENING
Length
42" 50" 55" 67" 72" 75"
Model 33" deep 51342LPPO 51350LPPO 51355LPPO 51367LPPO 51372LPPO 51375LPPO 51380LPPO 51385LPPO 51397LPPO
# of sets of doors (1) set 19" (1) set 27" (1) set 32" (1) set 19" (1) set 19" (2) sets 27" (1) set 27" (2) sets 32" (1) set 19"
+ 5" mullion + 5" mullion + 5" mullion (1) set 27" (1) set 32" + 3" mullion (1) set 32" + 3" mullion (2) sets 27"
Total # of 12x12 (2) 12x20’s (4) 12x20’s (4) 12x20’s (6) 12x20’s (6) 12x20’s (8) 12x20’s (8) 12x20’s (8) 12x20’s (10) 12x20’s
pans in drawer*
Min. Compr. Hsg. 18" 18" 18" 18" 18" 18" 18" 18" 18"
Min. # Pans (6) 1/6 (6) 1/6 (6) 1/6 (6) 1/6 (8) 1/6 (6) 1/6 (10) 1/6 (10) 1/6 (10) 1/6
Min. Length 27” 27” 27” 27” 34” 41” 41” 41” 41”
(clear) of opening
Max. # Pans (10) 1/6 (12) 1/6” (12) 1/6” (16) 1/6” (16) 1/6” (16) 1/6” (18) 1/6” (20) 1/6” (24) 1/6”
Cutting Bd. Width 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide
H.P./Refrigerant 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/134a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a
Volt/Cycle/Phase 115/60/1
Amps 9.0 9.0 9.0 9.0 12.0 12.0 12.0 12.0 12.0
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. - lbs. 460 496 545 617 672 687 708 726 844
BTU Design load 294/267 353/337 412/381 529/552 529/596 588/622 588/666 647/710 764/881
opening
(-10)/Base (+20)
BTU Design load 1109/2141 1201/2141 1283/2141 1423/2141 1759/3319 1866/3319 1866/3319 1966/3319 2151/3319
opening/base
115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
+ 3" mullion + 3" mullion + (2) 3" mullion
80" 85" 97"
NOTE: Pan capacity reflected is the actual amount of pans that are clearly accessible by the operator. Units with multiple covers may
actually have additional pan capacity that is partially obstructed by the cover divider/mullion.
BTU based on 86F ambient.
*Pans not provided.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 49
51000LPPO Series
JUNCTION BOX 26" AFF
115V/60Hz/1Ph
9' LONG CORD SET
CONDENSATE DRAIN 1/2"
OC
J
I.D. VINYL TUBING
(NEMA 5-15P)
MODEL # 51000LPPO
HP COMPRESSOR
LEGEND FOR
AFF = ABOVE FINISHED FLOOR
HP
19"REFRIG.
19"REFRIG.
27" REFRIG.
27" REFRIG.
19"REFRIG.
19"REFRIG.
67"
(PANS NOT PROVIDED)
27" REFRIG.
27" REFRIG.
27" REFRIG.
27" REFRIG.
PLATE SHELF
75" X 10" X .50"
POLY CUTTING BOARD
4"DP
12x20
4"DP
12x20
4"DP
12x20
12x20
4"DP
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
75"
25"
32" REFRIG.
32" REFRIG.
(PANS NOT PROVIDED)
PLATE SHELF
72" X 10" X .50"
POLY CUTTING BOARD
4"DP
12x20
12x20
4"DP
(PANS NOT PROVIDED)
4"DP
12x20
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
72"
17.75"
25"
(PANS NOT PROVIDED)
PLATE SHELF
(PANS NOT PROVIDED)
4"DP
4"DP
12x20
4"DP
67" X 10" X .50"
POLY CUTTING BOARD
12x20
12x20
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
17.75"
25"
42.75"
36"
33"
(PANS NOT PROVIDED)
32" REFRIG.
32" REFRIG.
PLATE SHELF
4"DP
12x2012x20
4"DP
55" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
55"
25"
(PANS NOT PROVIDED)
27" REFRIG.
27" REFRIG.
PLATE SHELF
4"DP
4"DP
12x20
50" X 10" X .50"
POLY CUTTING BOARD
12x20
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
50"
25"
HP
J
OC
19"REFRIG.
19"REFRIG.
PLATE SHELF
42" X 10" X .50"
POLY CUTTING BOARD
12x20
4"DP
(PANS NOT PROVIDED)
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
COMPR. HSG.
42"
17.75"
18"
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 19b
Page 50
51000LPPO Series
PLATE SHELF
48.5" X 10" X .50"
POLY CUTTING BOARD
(PANS NOT PROVIDED)
27" REFRIG.
27" REFRIG.
19"REFRIG.
19"REFRIG.
27" REFRIG.
27" REFRIG.
PLATE SHELF
(PANS NOT PROVIDED)
48.5" X 10" X .50"
POLY CUTTING BOARD
4"DP
12x20
4"DP
4"DP
12x20
12x20
4"DP
4"DP
12x20
12x20
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
17.75"
97"
25"
32" REFRIG.
32" REFRIG.
32" REFRIG.
32" REFRIG.
85"
32" REFRIG.
32" REFRIG.
27" REFRIG.
27" REFRIG.
PLATE SHELF
80"
(PANS NOT PROVIDED)
85" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
12x20
4"DP 4"DP
12x20
4"DP
12x20
4"DP
12x20
25"
4"DP
12x20
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
(PANS NOT PROVIDED)
4'DP
4'DP
12x20
4"DP
12x20
80" X 10" X .50"
POLY CUTTING BOARD
12x20
25"
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 51
Custom Remote Worktop Refrigerator models 53000A
model 53330A 53333A 53336A 53339A 53348A 53351A 53354A
53357A 53360A 53369A 53372A 53375A 53378A 53381A
53387A 533102A 533114A
Description:
Remote refrigerated worktop unit with 16 gauge reinforced
stainless steel top, and integral backsplash with 45˚ return.
Stainless steel doors on concealed hinges. Condensing unit not
provided. Evaporator blower coil with expansion valve supplied
and installed. 6" high adjustable and movable legs.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4".
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Exterior body
to be corrosion resistant steel. Door opening frames are ABS and
contain magnetic strip for positive seal of door gaskets. Work
surface to be at 36" work height. Legs to be 6" high stainless
steel with adjustable bullet foot. Legs mounted to full length
channel frame assembly which is integrally welded to bottom
of body assembly. Legs can be moved left to right to avoid floor
obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at
ends only. Stainless steel interior liner to be coved cornered to
form bottom, back and top. One baked enamel finished shelf
provided behind each door. Unit insulation to be CFC free foamed
in place urethane.
model 53354A shown with
optional finished end
Standard Features:
• Available under one piece top with other modular equipment
up to 16' in length
• 6" high legs—adjustable and movable
• Foamed in place “CFC free” urethane insulation
• Evaporator blower coil with expansion valve and refrigeration
lines provided and installed
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
• Filter dryer installed on liquid line
DOORS: Door fronts to be 22-gauge stainless steel exterior front
with 16 gauge stainless steel door pulls/handles. The interior
liner is vacuumed formed ABS with integral gasket retainer
for easy cleaning and accepts Randell’s Exclusive Press Fit
Gasket system. Doors are mounted on concealed hinges. One
removable wire shelf is supplied behind each door.
REFRIGERATION: Refrigerant to be specified by customer
(Specification based on R-134a refrigerant). Control and solenoid
provided standard. Interior fitted with Randell evaporator
blower coil for cooling base. Expansion valve and refrigeration
lines provided and installed for connection at unit rear. Units
totally prewired to junction box. Optional electric condensate
evaporator.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Options & Accessories:
Patented Drawer Cartridge Systems - Exclusive
Randell Feature + 3 years parts & labor warranty!
No Backsplash for dual sided / Cafeteria Operation
Tray racks for sheet pans (33" dp., 24" doors only)
Cutting boards
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Over-shelving storage options
Randell Custom, Page 20a
Revised 09/04
Page 52
53000A Series
53000 SERIES REMOTE REFRIGERATORS WITH STAINLESS STEEL TOPS
Length
30" 33" 36" 39" 48" 51"
Model 33" deep 53330A 53333A 53336A 53339A 53348A 53351A 53354A 53357A 53360A
# of doors (1) 24" (1) 21" (1) 24" (1) 27" (2) 21" (1) 21" (2) 24" (1) 24" (2) 27"
+ 6" mech. + 6" mech. + 6" mech. + 6" mech. + 6" mech. (1) 24" + 6" mech. (1) 27" + 6" mech.
+ 6" coil hsg. + 6" coil hsg. + 6" coil hsg. + 6" mech. + 6" mech.
Storage Cu. Ft. 5.21 6.18 7.16 8.14 11.04 12.04 13.02 14 14.97
33" deep
Storage Cu. Ft. 4.38 5.20 6.02 6.84 9.30 10.12 10.94 11.76 12.58
29" deep
Recommended*
H.P./Refrigerant 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/3hp/134a 1/3hp/134a
Storage Cu. Ft. 2.8 3.5 4.2 4.9 7.1 7.8 8.5 9.3 10.
22" deep
Recommended*
H.P./Refrigerant 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a 1/4hp/134a
Volt/Cycle/Phase 115/60/1
Amps 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Ship Wt. - lbs. 305 320 335 350 380 395 410 435 450
BTU Design load* 486 523 561 598 895 933 970 1008 1045
Evap. BTU/°TD 90 90 120 120 120 120 120 120 120
115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
54" 57" 60"
53000 SERIES REMOTE REFRIGERATORS WITH STAINLESS STEEL TOPS
Length
69" 72" 75" 78" 81" 87"
Model 33" deep 53369A 53372A 53375A 53378A 53381A 53387A 533102A 533114A
# of doors (3) 21" (2) 21" (1) 21" (3) 24" (2) 24" (3) 27" (4) 24" (4) 27"
+ 6" mech. (1) 24" (2) 24" + 6" mech. (1) 27" + 6" mech. + 6" mech. + 6" mech.
+ 6" mech. + 6" mech. + 6" mech.
Storage Cu. Ft. 17.9 18.88 19.86 20.83 20.51 22.46 27.34 31.25
33" deep
Storage Cu. Ft. 15.04 15.86 16.68 17.50 17.23 18.87 22.97 26.25
29" deep
Recommended*
H.P./Refrigerant 1/4hp/134a 1/3hp/134a 1/3hp/134a 1/3hp/134a 1/2hp/134a 1/2hp/134a 1/2hp/134a 1/2hp/134a
Volt/Cycle/Phase 115/60/1
Amps 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Ship Wt. - lbs. 495 510 535 550 565 595 655 700
BTU Design load* 1342 1380 1417 1455 1492 1567 1939 2090
Evap. BTU/°TD 120 120 120 120 240 240 240 240
NOTE:
If drop-in lowerators are to be installed in this equipment, the overall length of the tube should be no more than 24".
*BTU design load based on 100F ambient plus 30% for use and product loading. Final system selection should consider
usage requirements and combined loads. Recommended HP reflects Randell HP applied to self-contained (single) unit of
equal storage capacity. Increased HP may be appropriate in some remote applications.
115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
102" 114"
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 53
53000A Series
LOCATION
PVC 8-1/2" AFF.
EVAPORATOR COIL
CONDENSATE DRAIN 1/2 "
OC
JUNCTION BOX 26"
LEGEND FOR
CHOOSE ONE:
R404 REFRIG.
R134A REFRIG.
R-22 REFRIG.
AFF. FAN MOTOR(S) AND
LINE 8 1/2 " AFF
MODEL # 53000A
115V-60Hz-1Ph
1/4" LIQUID, 3/8" SUCTION
AFF. = ABOVE FIXED FLOOR
LIGHT(S)
J
OR
42.75"
36"
33"
24"REFRIG 21"REFRIG21"REFRIG
72"
21"REFRIG21"REFRIG 21"REFRIG
69"
27"REFRIG27"REFRIG
60"
27"REFRIG24"REFRIG
57"
24"REFRIG24"REFRIG
54"
24"REFRIG21"REFRIG
51"
21"REFRIG 21"REFRIG
48"
27"REFRIG
39"
24"REFRIG
36"
21"REFRIG
C
O
I
L
33"
J
OR
OC
24"REFRIG
P
A
N
E
L
30"
6"
P
A
N
E
L
P
A
N
E
L
P
A
N
E
L
P
A
N
E
L
P
A
N
E
L
P
A
N
E
L
P
A
N
E
L
P
A
N
E
L
P
A
N
E
L
P
A
N
E
L
C
O
I
L
C
O
I
L
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 20b
Page 54
53000A Series
27"REFRIG
P
A
N
E
L
27"REFRIG 27"REFRIG 27"REFRIG
114"
24"REFRIG
P
A
N
E
L
24"REFRIG 24"REFRIG24"REFRIG
102"
P
A
N
E
L
27"REFRIG27"REFRIG27"REFRIG
87"
24"REFRIG27"REFRIG
P
A
N
E
L
24"REFRIG
81"
24"REFRIG
P
A
N
E
L
24"REFRIG 24"REFRIG
78"
24"REFRIG
P
A
N
E
L
24"REFRIG 21"REFRIG
75"
DOOR OPENING SIZES - INTERIOR DEPTHS
Clearances Through Door Interior Depth Behind Door
Door Width Lt. to Rt. Top to Bottom (unit depths in parentheses)
18" 13 1/4" 20 1/4" (33
21" 16 1/4" 20 1/4" (33
24" 19 1/4" 20 1/4" (33
27" 22 1/4" 20 1/4" (33
")-26"
")-26"
")-26"
")-26"
(29
(29
(29
(29
")-22"
")-22"
")-22"
")-22"
(22
(22
(22
(22
")")")")-
15.5
15.5
15.5
15.5
"
"
"
"
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
•Shelf depth is 25 1/4" on 33
and 14
1/2
" on 22" deep equipment.
" deep equipment, 21
1/4" on 29
" deep equipment,
Page 55
Custom Remote Raised Coldwall Refrigerator models 53000PR
model 53333PR 53336PR 53339PR 53342PR 53351PR 53354PR 53357PR
53360PR 53363PR 53372PR 53375PR 53378PR 53381PR 53384PR
53390PR 533105PR 533117PR
Description:
Remote refrigerator storage units with mechanically cooled
raised rail. These units are offered in variety of lengths to meet
your specific base storage or pan storage requirements. The
mechanically cooled pan opening uses Randell’s exclusive
design technologies, such as our Exclusive Refrigerated Raised
Rail Thermostat allowing customers to make adjustments to the
rail temperatures (independent of the base). The rail is designed
to be a manual defrost system and allows the operator to shut
the rail off while leaving the base operational.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2” nosing. Ends at top fitted with recessed
heavy duty steel bars for field bolting units together, producing a
hairline seam. Hinged louver panel to be stainless steel. Exterior body to
be corrosion resistant steel. Door opening frames are ABS and contain
magnetic strip for positive seal of door gaskets. Work surface to be at
36” work height. Legs to be 6” high stainless steel with adjustable
bullet foot. Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be moved left
to right to avoid floor obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.
Stainless steel interior liner to be coved cornered to form bottom, back
and top. One baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.
model 53354PR shown with
optional finished end
Standard Features:
• Low profile rail design with 2” recess pans provides easy
reach and optimal pan temperatures & reliability
• Front breathing mechanical housing with directed air flow Randell Exclusive
• Easy maintenance Press-Fit gaskets- A Randell Exclusive
• Raised rail thermostat- A Randell Exclusive
• Drain in rail for easy cleaning
• Hinged Removable stainless steel covers
• Foamed in place urethane insulation providing superior
insulation and durability
• 6” high adjustable legs, moveable left to right if needed
• Available up to 16’ under one common assembly
• Adapter bars are standard to accommodate a compliment of
1/6 size pans
DOORS: Door fronts to be 22-gauge stainless steel exterior front with 16
gauge stainless steel door pulls/handles. The interior liner is vacuumed
formed ABS with integral gasket retainer for easy cleaning and accepts
Randell’s Exclusive Press Fit Gasket system. Doors are mounted on
concealed hinges. One removable wire shelf is supplied behind each
door.
REFRIGERATION: Refrigerant to be specified by customer (Specification
based on R-404a refrigerant). System is a balanced heavy duty system
set-up to accept hook-up to a single compressor system. The base is
cooled by an independent blower coil operating on its own expansion
valve and thermostat and operates through a dedicated solenoid
valve. The rail is provided with its own rail thermostat (located in the
mechanical housing) making it easily adjustable for specific ambient
conditions without effecting the balance of the system. An on/off switch
for the rail is provided. Optional electric condensate evaporator.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Options & Accessories:
Patented Drawer Cartridge Systems - Exclusive
Randell Feature + 3 years parts & labor warranty!
Partial Length Rails
Tray racks for sheet pans (33" dp., 24" doors only)
Cutting boards
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Over-shelving storage options
Lift-off (removable) night covers
Hinged slide-back removable covers
Flat top rails for use in display type kitchens
Ambient fighting hood design with slide-back covers
Wide pan rail
Randell Custom, Page 21a
Revised 09/04
Page 56
53000PR Series
53000PR SERIES REMOTE REFRIGERATORS WITH STANDARD DEPTH RAISED RAIL
Length
Model 33" 53333PR 53336PR 53339PR 53342PR 53351PR 53354PR 53357PR 53360PR 53363PR
# of doors
(9” mech.)
# Pans (6-8) 1/6 (6-8) 1/6 (6-10) 1/6 (6-10) 1/6 (6-12) 1/6 (6-14) 1/6 (8-14) 1/6 (8-16) 1/6 (10-16) 1/6
Min. Length of Rail
Storage Cu. Ft.
33”
Storage Cu. Ft.
29”
Work surface
Depth 33”
Recommended
H.P./Refrigerant
Amps 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Ship Wt. - lbs. 400 419 438 475 494 513 544 563 619
BTU Design load* 302/455 302/492 378/529 378/566 454/840 529/877 529/914 605/950 930/1051
Evap BTU/TD
*Rail/Base
Length
Model 33" 53372PR 53375PR 53378PR 53381PR 53384PR 53390PR 533105PR 533117PR
# of doors
(9” mech.)
# Pans (10-16) 1/6 (10-16) 1/6 (10-18) 1/6 (10-20) 1/6 (12-20) 1/6 (12-22) 1/6 (14-24) 1/6 (14-28) 1/6
Min. Length of Rail
Storage Cu. Ft.
33”
Storage Cu. Ft.
29”
Work surface
Depth 33”
Recommended
H.P./Refrigerant
Amps 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Ship Wt. - lbs. 638 669 688 706 744 797 819 875
BTU Design load* 930/1080 1033/1109 1033/1138 1033/1167 1137/1226 1182/1275 1343/1517 1550/1633
Evap BTU/TD
*Rail/Base
33" 36" 39" 42” 51" 54" 57" 60" 63"
(1) 24"
27” 27” 27” 27” 27” 27”
4.63 5.50 6.37 7.23 9.84 10.71 11.57 12.44 13.31
3.89 4.62 5.35 6.08 8.26 8.99 9.72 10.45 11.18
14.8”
wide
1/3hp/
404a
23/120 23/120 23/120 31/120 31/120 35/120 35/120 35/120 605/987
72" 75" 78" 81" 84" 90" 105" 117"
(3) 21" (2) 21", (1)
41” 41” 41” 41”
15.91 16.78 17.65 18.52 19.39 21.12 25.46 27.78
13.37 14.10 14.83 15.56 16.28 17.74 21.39 23.33
14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide
1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 3/4hp/404a 3/4hp/404a
680/1262 756/1299 756/1335 832/1372 832/1409 907/1483 1058/1831 1210/1978
(1) 21" + 6"
coil hsg.
14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8” wide 14.8”
1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/
24"
(1) 24" + 6" coil
hsg.
(2) 24", (1)
21"
(1) 27" + 6" coil
hsg.
(2) 21" (1) 21", (1)
(3) 24" (2) 24", (1)
24"
(3) 27" (4) 24" (4) 27"
27”
48” 48”
(2) 24" (1) 24", (1)
27”
34” 34” 41”
wide
404a
55”
(2) 27"
14.8” wide
1/2hp/404a
55”
NOTE:
Pan capacity reflected is the actual amount of pans that are clearly accessible by the operator. Units with multiple covers may actually have
additional pan capacity that is partially obstructed by the cover divider/mullion. Remote rails intended to be connected to separate low-temp
system, can be as small as (6) pans on any size base.
*BTU load and capacity ratings based on 100F ambient plus 30% for usage and product loading in base. Final system selection should consider
usage requirements and combined loads. Recommended HP applied to self-contained (single) unit of equal storage capacity; increased HP may
be appropriate in some remote applications.
Evaporator BTU/TD reflects NSF refrigerated base requirements when base is provided with +20F system separate from -10F rail system.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 57
53000PR Series
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 21b
Page 58
53000PR Series
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
DOOR OPENING SIZES - INTERIOR DEPTHS
Clearances Through Door Interior Depth Behind Door
Door Width Lt. to Rt. Top to Bottom (unit depths in parentheses)
18" 13 1/4" 20 1/4" (33
21" 16 1/4" 20 1/4" (33
24" 19 1/4" 20 1/4" (33
27" 22 1/4" 20 1/4" (33
•Shelf depth is 25 1/4" on 33
and 14
1/2
" on 22" deep equipment.
" deep equipment, 21
")-26"
")-26"
")-26"
")-26"
1/4" on 29
(29
")-22"
(22
(29
")-22"
(22
(29
")-22"
(22
(29
")-22"
(22
" deep equipment,
")")")")-
15.5
15.5
15.5
15.5
"
"
"
"
Page 59
Custom Remote Recessed Coldwall Refrigerator models 53000PO
model 53333PO 53336PO 53339PO 53348PO 53351PO 53354PO 53357PO
53360PO 53369PO 53372PO 53375PO 53378PO 53381PO 53387PO
533102PO 533114PO
Description:
Remote refrigerator storage units with mechanically cooled
pan opening. These units are offered in variety of lengths to
meet your specific base storage or pan storage requirements.
The mechanically cooled pan opening uses Randell’s exclusive
design technologies, such as our Exclusive Refrigerated Pan
Opening Thermostat allowing customers to make adjustments to
the opening temperatures (independent of the base).
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2” nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4”.
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Exterior body to
be corrosion resistant steel. Door opening frames are ABS and
contain magnetic strip for positive seal of door gaskets. Work
surface to be at 36” work height. Legs to be 6” high stainless
steel with adjustable bullet foot. Legs mounted to full length
channel frame assembly which is integrally welded to bottom
of body assembly. Legs can be moved left to right to avoid floor
obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends
only. Stainless steel interior liner to be coved cornered to form
bottom, back and top. Unit insulation to be CFC free foamed in
place urethane.
DOORS: Door fronts to be 22-gauge stainless steel exterior front
with 16 gauge stainless steel door pulls/handles. The interior
liner is vacuumed formed ABS with integral gasket retainer for
easy cleaning and accepts Randell’s Exclusive Press Fit Gasket
System. Doors are mounted on concealed hinges.
REFRIGERATION: Refrigerant to be specified by customer
(Specification based on R-404a refrigerant). System is a
balanced heavy duty system set-up to accept hook-up to a
single compressor system. The base is cooled by an independent
blower coiled operating on its own expansion valve and
thermostat and operates through a dedicated solenoid valve.
The pan opening is provided with its own thermostat (located in
the compressor housing) making it easily adjustable for specific
ambient conditions without effecting the balance of the system.
An on/off switch for the pan opening is provided. Optional
electric condensate evaporator.
model 53354PO shown with
optional finished end
Standard Features:
• Low profile 2” recess pan design provides easy reach and optimal
pan temperatures & reliability
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air flow Randell Exclusive
• Easy maintenance Press-Fit gaskets- A Randell Exclusive
• Pan opening thermostat- A Randell Exclusive
• Drain in pan opening for easy cleaning
• Hinged Removable stainless steel covers
• Foamed in place urethane insulation providing superior insulation
and durability
• 6” high adjustable legs, moveable left to right if needed
• Available up to 16’ under one common assembly
• Adapter bars are standard to accommodate a compliment of
1/6 size pans
Options & Accessories:
Hinged slide-back covers
Lift-off (removable) night covers
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Over-shelving storage options
Wide pan opening
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 22a
Revised 09/04
Page 60
53000PO Series
53000PO SERIES REMOTE REFRIGERATORS WITH STANDARD DEPTH RECESSED PAN OPENING
Length
Model 33" 53333PO 53336PO 53339PO 53348PO 53351PO 53354PO 53357PO 53360PO 53369PO
# of doors
(6” mech.)
# Pans (6) 1/6 (6-8) 1/6 (6-8) 1/6 (6-12) 1/6 (6-12) 1/6 (6-12) 1/6 (8-14) 1/6 (8-14) 1/6 (10-18) 1/6
Min. Length of
Opening
Storage Cu. Ft. 4.31 4.99 5.67 7.71 8.39 9.07 9.75 10.43 12.47
Cutting Board
Width
Recommended
H.P./Refrigerant
Amps 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Ship Wt. - lbs. 352 369 385 418 435 451 479 495 545
BTU Design load* 302/437 302/473 378/509 454/744 454/780 529/815 529/851 605/887 680/1222
Evap BTU/TD
*Opening/Base
33" 36" 39" 48” 51" 54" 57" 60" 69"
(1) 21"
27” 27” 27” 27” 27” 27”
10” 10” 10” 10” 10” 10” 10” 10” 10”
1/3hp/
404a
13/120 16/120 19/120 22/120 22/120 25/120 25/100 27/180 30/120
(1) 24" + 6"
coil hsg.
1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/
(1) 27" + 6" coil
hsg.
(2) 21" + 6" coil
hsg.
((1) 21", (1)
24"
(2) 24" (1) 24", (1)
27”
34” 34” 41”
(2) 27" (3) 21"
404a
1/2hp/404a
Length
Model 33" 53372PO 53375PO 53378PO 53381PO 53387PO 533102PO 533114PO
# of doors
(9” mech.)
# Pans (10-18) 1/6 (10-18) 1/6 (10-18) 1/6 (10-18) 1/6 (12-20) 1/6 (14-24) 1/6 (14-26) 1/6
Min. Length of Opening
Storage Cu. Ft. 13.15 13.83 14.51 15.19 16.55 16.43 17.86
Cutting Board Width 10” 10” 10” 10” 10” 10” 10”
Recommended
H.P./Refrigerant
Amps 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Ship Wt. - lbs. 561 589 605 622 655 721 770
BTU Design load* 680/1158 756/1193 756/1229 832/1265 832/1336 1058/1643 1134/1786
Evap BTU/TD
*Opening/Base
NOTE:
Pan capacity reflected is the actual amount of pans that are clearly accessible by the operator. Units with multiple covers may actually have
additional pan capacity that is partially obstructed by the cover divider/mullion. Remote pan openings intended to be connected to separate lowtemp system, can be as small as (6) pans on any size base.
*BTU load and capacity ratings based on 100F ambient plus 30% for usage and product loading in base. Final system selection should consider
usage requirements and combined loads. Recommended HP applied to self-contained (single) unit of equal storage capacity; increased HP may
be appropriate in some remote applications.
Evaporator BTU/TD reflects NSF refrigerated base requirements when base is provided with +20F system separate from -10F pan opening
system.
72" 75" 78" 81" 87" 102" 114"
(2) 21", (1)
24"
41” 41” 41” 41”
1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 5/8hp/404a 3/4hp/404a
30/120 33/120 33/120 36/240 36/240 44/240 47/240
(2) 24", (1)
21"
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
(3) 24" (2) 24", (1)
27”
(3) 27" (4) 24" (4) 27"
48”
55”
55”
Page 61
53000PO Series
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 22b
Page 62
53000PO Series
DOOR OPENING SIZES - INTERIOR DEPTHS
Clearances Through Door Interior Depth Behind Door
Door Width Lt. to Rt. Top to Bottom (unit depths in parentheses)
18" 13 1/4" 13 1/2" (33
21" 16 1/4" 13 1/2" (33
24" 19 1/4" 13 1/2" (33
27" 22 1/4" 13 1/2" (33
•Shelf depth is 25 1/4" on 33
and 14
1/2
" on 22" deep equipment.
" deep equipment, 21
")-26"
")-26"
")-26"
")-26"
1/4" on 29
(29
")-22"
(29
")-22"
(29
")-22"
(29
")-22"
" deep equipment,
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
(22
(22
(22
(22
")")")")-
15.5
15.5
15.5
15.5
"
"
"
"
Page 63
Custom Remote Refrigerated Storage models 53000LPPO
model 53330LPPO 53338LPPO 53343LPPO 53355LPPO 53360LPPO 53363LPPO
53368LPPO 53373LPPO 53385LPPO
Description:
Remote drawer base refrigerator storage units with mechanically cooled
pan opening. These units are offered in variety of lengths to meet your
specific base storage or pan storage requirements. The mechanically cooled
pan opening uses Randell’s exclusive design technologies, such as our
Exclusive Refrigerated Pan Opening Thermostat allowing customers
to make adjustments to the opening temperatures (independent of the
base). The base is designed with a “low-profile” cabinet and is supplied
with a plate shelf above the refrigerated door openings.
These units feature our Patented Drawer Cartridge Assembly.
A fully welded, unitized drawer cartridge assembly with a quick release
that allows the refrigerated drawers to be easily removed for cleaning.
This equipment is intended for use in rooms having an ambient temperature of
86˚F (30˚C) or less.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top fitted
with recessed heavy duty steel bars for field bolting units together,
producing a hairline seam. Exterior body to be corrosion resistant steel.
Door opening frames are ABS and contain magnetic strip for positive
seal of door gaskets. Work surface to be at 36" work height. Legs to be
6" high stainless steel with adjustable bullet foot. Legs mounted to full
length channel frame assembly which is integrally welded to bottom of
body assembly. Legs can be moved left to right to avoid floor obstacles
during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.
Stainless steel interior liner to be coved cornered to form bottom, back
and top. One baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.
REFRIGERATED DRAWERS: Fully welded, unitized drawer cartridge
assembly - patented. Heavy duty full extension 14 gauge drawer tracks
on 1 5/8" heavy duty stainless steel bearings. Will accommodate (2)
12" x 20" x 4" deep pans per drawer (pans not included). Quick release
allows drawers to be easily removed for cleaning. Stainless fronts,
mounted to drawer cartridge assembly with easy to grasp drawer
handles. Drawers are self-closing with press fit magnetic gaskets (designed for installation & removal without tools).
REFRIGERATION:Refrigerant to be specified by customer. System is a
balanced heavy duty set-up to accept hook-up to a single compressor
system. The base is cooled by an independent blower coiled operating on
its own expansion valve and thermostat and operates through a dedicated
solenoid valve. The pan opening is provided with its own expansion valve,
thermostat, and operates through its own dedicated solenoid valve (located in the compressor housing) making it easily adjustable for specific
ambient conditions without effecting the balance of the system. An on/off
switch for the pan opening is provided.
model 53375LPPO shown with:
•optional finished end
•pan covers removed
•standard backsplash removed
Standard Features:
• “Low-profile” refrigerated cabinet with plate shelf above
• Low profile 2" recess pan design provides easy reach and optimal pan
temperatures & reliability
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air flow-Randell Exclusive
• Patented Drawer Cartridge System with easy maintenance Press-Fit gaskets
- A Randell Exclusive
• Pan opening thermostat-
• Drain in pan opening for easy cleaning
• Hinged Removable stainless steel covers
• Automatic base defrost
• Foamed in place urethane insulation providing superior insulation and durability
• 6" high adjustable legs, moveable left to right if needed
• Available up to 16' under one common assembly
• Adapter bars are standard to accommodate a compliment of 1/6 size pans
• Filter dryer installed on each liquid line
A Randell Exclusive
Options & Accessories:
Hinged slide-back removable covers
Lift-Off (removable) night covers
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Electric condensate evaporator
Wide pan opening
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 23a
Revised 09/04
Page 64
5300OLPP0 Series
53000LPPO SERIES REMOTE DRAWER BASE REFRIGERATORS WITH STANDARD DEPTH RECESSED PAN OPENING
Length
30" 38" 43" 55" 60" 63"
Model 33" deep 53330LPPO 53338LPPO 53343LPPO 53355LPPO 53360LPPO 53363LPPO 53368LPPO
# of sets of doors (1) set 19" (1) set 27" (1) set 32" (1) set 19" (1) set 19" (2) sets 27" (1) set 27"
+ 5" mullion + 5" mullion + 5" mullion (1) set 27" (1) set 27" + 3" mullion (1) set 32"
+ 6" mech. hsg.
+ 6" mech. hsg. + 6" mech. hsg. + 6" mech. hsg.
Total # of 12x12 (2) 12x20’s (4) 12x20’s (4) 12x20’s (6) 12x20’s (6) 12x20’s (8) 12x20’s (8) 12x20’s
pans in drawer
Min. # Pans (6) 1/6 (6) 1/6 (6) 1/6 (6) 1/6 (10) 1/6 *(6) 1/6 (10) 1/6
Min. Length 27” 27” 27” 27” 41” 41” 41”
(clear) of opening
Max. # Pans (6) 1/6 (8) 1/6” (10) 1/6” (14) 1/6” (14) 1/6” (14) 1/6” (14) 1/6”
Cutting Bd. Width 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide
Recommended*
H.P./Refrigerant 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a
Volt/Cycle/Phase 115/60/1
Amps 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Ship Wt. - lbs. 391 422 463 524 571 587 602
BTU Design load 227/446 302/563 378/636 454/791 605/996 605/1040 680/1113
opening
(-10)/Base (+20)
Evap. BTU/°TD** 13/120 16/120 19/120 22/120 27/120 27/120 30/120
opening/base
+ 6" mech. hsg. + 6" mech. hsg.
115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
+ 3" mullion
+ 3" mullion
+ 6" mech. hsg.
68"
+ 3" mullion
Length
73" 85"
Model 33" deep 53373LPPO 53385LPPO
# of sets of doors (2) sets 32" (1) set 19"
+ 5" mullion (2) sets 27"
+ (2) 3" mullion
+ 6" mech. hsg.
Total # of 12x12 (8) 12x20’s (10) 12x20’s
pans in drawer
Min. # Pans (10) 1/6 (10) 1/6
Min. Length 41” 41”
(clear) of opening
Max. # Pans (18) 1/6 (20) 1/6”
Cutting Bd. Width 11" wide 11" wide
Recommended*
H.P./Refrigerant 1/2hp/404a 1/2hp/404a
Volt/Cycle/Phase 115/60/1
Amps 5.0 5.0
Ship Wt. - lbs. 617 717
BTU Design load 680/1186 832/1472
(-10)/Base (+20)
Evap. BTU/°TD** 30/120 36/120
opening/base
115/60/1
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
NOTE: Pan capacity reflected is the actual amount of pans that
are clearly accessible by the operator. Units with multiple covers may
actually have additional pan capacity that is partially obstructed by the
cover divider/mullion.
*BTU loads shown are based on 100° ambient plus 30% for usage and product loading in base.
Final system selection should consider usage requirements and combined loads.
Recommended H.P. reflects Randell H.P. applied to self-contained (single) unit of equal storage
capacity, increasing HP may be appropriate in some remote applications.
**Evaporator BTU/*TD reflects NSF refrigerated base requirements when base is provided with
+20° F system separate from -10°F pan opening system.
***Remote pan openings intended to be connected to separate low-temp system,
can be as small as (6) pans on any size base.
Page 65
53000LPPO Series
25"
NOTE: REQUIRES (2)
REFRIGERATION HOOK-UPS
CONDENSATE DRAIN 1/2 "
1/4" LIQUID, 3/8" SUCTION
115V-60Hz-1Ph
PVC 8-1/2" AFF.
LOCATION
EVAPORATOR COIL
R134A REFRIG.
R-22 REFRIG.
R404 REFRIG.
CHOOSE ONE:
LINE 8 1/2 " AFF
MODEL # 53000LPP0
JUNCTION BOX 26"
AFF. FAN MOTOR(S) AND
AFF. = ABOVE FINISHED FLOOR
LEGEND FOR
OC
J
LIGHT(S)
OR
(PANS NOT PROVIDED)
PLATE SHELF
27" REFRIG.
27" REFRIG. 27" REFRIG.
27" REFRIG.
4"DP
12x20
4"DP
12x20 12x20
4"DP
4"DP
12x20
63"
25"
(PANS NOT PROVIDED)
32" REFRIG.
32" REFRIG.19"REFRIG.
19"REFRIG.
PLATE SHELF
(PANS NOT PROVIDED)
4"DP
12x20
4"DP
12x20
12x20
4"DP
25"
60"
17.75"
19"REFRIG.
19"REFRIG.
(PANS NOT PROVIDED)
27" REFRIG.
PLATE SHELF
27" REFRIG.
(PANS NOT PROVIDED)
4"DP
12x20
12x20
4"DP
12x20
4"DP
55"
17.75"
33"
36"
42.75"
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
63" X 10" X .50"
POLY CUTTING BOARD
60" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
55" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
32" REFRIG.
32" REFRIG.
PLATE SHELF
PANS NOT PROVIDED
43" X 10" X .50"
POLY CUTTING BOARD
4"DP
12x20
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
12x20
4"DP
25"
43"
27" REFRIG.
27" REFRIG.
PLATE SHELF
(PANS NOT PROVIDED)
38" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
12x20
4"DP
12x20
4"DP
25"
38"
J
OC
OR
PLATE SHELF
19"REFRIG.
19"REFRIG.
(PANS NOT PROVIDED)
30" X 10" X .50"
POLY CUTTING BD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
12x20
4"DP
30"
17.75"
6"
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 23b
Page 66
53000LPPO Series
25"
85"
17.75"
25"
73"
19"REFRIG.
19"REFRIG.
27" REFRIG.
PLATE SHELF
27" REFRIG.
(PANS NOT PROVIDED)
27" REFRIG.
27" REFRIG.
(PANS NOT PROVIDED)
85" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
4"DP
12x20
4"DP
12x20
12x20
4"DP
12x20
12x20
4"DP
4"DP
32" REFRIG.
PLATE SHELF
32" REFRIG.
32" REFRIG.
32" REFRIG.
(PANS NOT PROVIDED)
12x20
4"DP
12x20
4"DP
73" X 10" X .50"
POLY CUTTING BOARD
12x2012x20
4"DP 4"DP
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
PLATE SHELF
27" REFRIG.
27" REFRIG.
32" REFRIG.
32" REFRIG.
(PANS NOT PROVIDED)
68" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
12x20
4"DP
12x20
4"DP
4"DP
12x20
4"DP
12x20
25"
68"
25"
85"
17.75"
19"REFRIG.
19"REFRIG.
27" REFRIG.
PLATE SHELF
27" REFRIG.
(PANS NOT PROVIDED)
27" REFRIG.
27" REFRIG.
(PANS NOT PROVIDED)
85" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
4"DP
12x20
4"DP
12x20
12x20
4"DP
12x20
12x20
4"DP
4"DP
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 67
Custom Remote Upright models 58000A & 61000A
model 58324A 61324A
Description:
24" long remote refrigerator or freezer upright unit with stainless
steel top, fronts and sides. Dry storage drawer below refrigerated
section. Condensing unit and controls not provided. Evaporator
blower coil with expansion valve supplied and installed. 6" high
adjustable and movable legs.
Specifications:
CABINET EXTERIOR: Exterior body ends to be stainless steel.
Back of unit to be corrosion resistant steel. Door opening frames
are ABS and contain magnetic strip for positive seal of door
gaskets. Dry storage drawer to be located below refrigerated
section. Drawer liner to be ABS material, removable without
tools, with drawer track of 16 gauge stainless steel with 1 5/8"
stainless steel bearings. Drawer front of 22 gauge stainless steel.
Drawer track, liner and front assembly contained in 20 gauge
stainless steel housing. Legs to be 6" high stainless steel with
adjustable bullet foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of body assembly.
Legs can be moved left to right to avoid floor obstacles during
installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at
ends only. Stainless steel interior liner to be coved cornered to
form bottom, back and top. One baked enamel finished shelf
provided behind each door. Unit insulation to be CFC free foamed
in place urethane.
DOORS: Door fronts to be 22 gauge stainless steel with 16 gauge
stainless steel handles, magnetic gaskets, ABS door liner and
foamed in place insulation. Hinges are concealed, all stainless
steel with bronze pivot pin in nylon bushing.
model 58000A shown
Standard Features:
• 6" high legs—adjustable and movable.
• Refrigeration system utilizes “CFC free” R-134a
refrigerant. Freezers utilize R-404a refrigerant,
(specify if otherwise).
• Evaporator blower coil with expansion valve and
refrigeration lines provided and installed
• Thermostat controlling solenoid
• Dry storage drawer located at bottom of unit for bread
or tool storage
• Foamed in place “CFC free” urethane insulation
• 24" long unit designed to fit integrally into unit line up
REFRIGERATION: Refrigeration system utilizes “CFC free” R134a refrigerant. (Specify if refrigerant to be used is otherwise).
Condensing unit not provided. Interior fitted with Randell
evaporator blower coil for cooling base. Expansion valve,
solenoid valve, thermostat, and refrigeration lines provided and
installed for connection at unit rear. Units totally prewired to
junction box.
Model 61000A same as model 58000A series with automatic,
self-defrosting system for freezer operation. Freezer system to
utilize “CFC Free” R-404a refrigerant, specify if otherwise. Door
frames to enclose heater elements to prevent gasket freezing.
Back-up element installed.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 24
Revised 09/04
Page 68
58000A, 61000A Series
CONNECTION
1/4" LIQUID
REFRIGERATION
CONDENSATE DRAIN
JUNCTION BOX
10" AFF
1/2" PVC 8 1/2" AFF
OR
OC
J
ABOVE FINISHED
58000 & 61000 SERIES
LEGEND FOR
AFF
FLOOR
3/8" SUCTION
8 1/2" AFF
L
L
J
OR
OC
C
C
DRY DRY
38° -42°
REFRIG.
38° -42°
REFRIG.
0°
FREEZER
0°
FREEZER
24" [610]
45.375" [1153]
12.25" [311]
8.5" [216]
24" [610]
73.75" [1873]
20.25" [514]
26.75" [679]
21.375" [543]
21.375" [543]
29" [737]
33" [838]
29" [737]
33" [838]
33" [838]
OR
29" [737]
DRAWER LINERS
Drawer Size Removable Liner Size
24" (1) 16" x 16" x 6"
DOOR OPENING SIZES - INTERIOR DEPTHS
Clearances Through Door Interior Depth Behind Door
Door Width Lt. to Rt. Top to Bottom (unit depths in parentheses)
24" 19 1/4" 20 1/4" (33") -26" (29") -22"
• Shelf depth is 25 1/4" on 33" deep equipment,
21 1/4" on deep equipment.
29
" DEEP EQUIPMENT
Length
24"
Height* 73.75"
Doors (2) 1/2 size
Drawers (1) Dry
Storage
(Cu. Ft.) 9.48
Rec. H.P. 1/4
BTU’s 1750
Volts 115/60/1
Amps 2.5
Ship Wt. 517 lbs.
* All units on 6" high adjustable, movable legs.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
33
" DEEP EQUIPMENT
Length
24"
Model No. 58324A
Height* 73.75"
Doors (2) 1/2 size
Drawers (1) Dry
Storage
(Cu. Ft.) 11.2
Rec. H.P. 1/4
BTU’s 1750
Volts 115/60/1
Amps 2.5
Ship Wt. 517 lbs.
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
29
" DEEP EQUIPMENT
Length
24"
Height* 73.75"
Doors (2) 1/2 size
Drawers (1) Dry
Storage
(Cu. Ft.) 7
Rec. H.P. 1/3
BTU’s 1225
Volts 115/60/1
Amps 4
Ship Wt. 527 lbs.
33
" DEEP EQUIPMENT
Length
Model No. 61324A
Height* 73.75"
Doors (2) 1/2 size
Drawers (1) Dry
Storage
(Cu. Ft.) 7.85
Rec. H.P. 1/3
BTU’s 1225
Volts 115/60/1
Amps 4
Ship Wt. 527 lbs.
24"
Refrigerator
Freezer
Page 69
Custom SC Upright models 60000A, 62000A & 63000A
model 60324A 62324A 63324A
Description:
24" long self-contained refrigerated upright unit with stainless
steel top, fronts and sides. Available as a refrigerator, freezer, or
dual-temp. Refrigerators utilize “CFC free”, R-134a refrigerant,
freezers use R-404a. Designed to fit integrally into unit line up.
6" high adjustable and movable legs.
Specifications:
CABINET EXTERIOR: Exterior body ends to be stainless steel. Back
of unit to be corrosion resistant steel. Door opening frames are
ABS and contain magnetic strip for positive seal of door gaskets.
Louver panel to be die-stamped stainless steel. Legs to be 6"
high stainless steel with adjustable bullet foot. Legs mounted to
full length channel frame assembly which is integrally welded
to bottom of body assembly. Legs can be moved left to right to
avoid floor obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at
ends only. Stainless steel interior liner to be coved cornered to
form bottom, back and top. One baked enamel finished shelf
provided behind each door. Unit insulation to be CFC free foamed
in place urethane.
DOORS: Door fronts to be 22 gauge stainless steel with 16 gauge
stainless steel handles, magnetic gaskets, ABS door liner and
foamed in place insulation. Hinges are concealed, all stainless
steel with bronze pivot pin in nylon bushing.
REFRIGERATION: Refrigeration system to utilize “CFC Free”
refrigerant. Interior fitted with Randell evaporator blower coil
for cooling base. Blower coil fitted with expansion valve for fast
recovery and thermostatic control for field adjustability. Hot gas
condensate evaporator provided. Unit totally prewired and to be
supplied with 8' cordset (NEMA 5-15P) for 115V operation.
model 60000A shown
Standard Features:
• Available as refrigerator, freezer,
or dual-temperature unit
• 6" high legs—adjustable and movable
• Self-contained refrigeration system utilizes “CFC free”
R-134a refrigerant. Freezers and dual temps.
utilize R-404a refrigerant.
• Available with refrigerated drawers
(Not available on dual temps)
• Foamed in place “CFC free” urethane insulation
62000A series freezer same as model 60000A series except unit
to have 1/3 hp low-temp condensing unit utilizing R-404a refrigerant and automatic, self-defrosting system for freezer operation.
Door frames to enclose heater elements to prevent gasket freezing.
Back-up element installed.
63000A series dual-temp refrig./freezer same as 60000A series
except unit to have 1/2 hp low-temp condensing unit and double
hookup to freezer section on top and refrigerator section utilizing
R-404a. Freezer blower coil to have automatic self-defrosting
system. Freezer door frame to enclose heater element to prevent
gasket freezing. Back-up element installed.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 25
Revised 08/05
Page 70
DOOR OPENING SIZES - INTERIOR DEPTHS
ELEC CONDENSATE
26" INTERIOR
DEPTH BEHIND
DOOR
EVAPORATER
LEGEND
6' NEMA 5-15P
120V-60Hz-1Ph
10.4 Amps
10" AFF.
FIXED FLOOR
AFF = ABOVE
J
J-BOX
24"
J
HP
24"
6"
73.5"
33"
0°
FREEZER
38° -42°
REFRIG.
0°
FREEZER
0°
FREEZER
REFRIG.
38° -42°
REFRIG.
38° -42°
24"
Clearances Through Door Interior Depth Behind Door
Door Width Lt. to Rt. Top to Bottom (unit depths in parentheses)
24" 19 1/4" 20 1/4" (33") - 26" (29") - 22"
• Shelf depth is 25 1/4" on 33" deep equipment,
21 1/4" on deep equipment.
60000A, 62000A, 63000A Series
29
" DEEP EQUIPMENT
Length
24"
Height* 73.75"
Doors (2) 1/2 size
Storage
(Cu. Ft.) 9.48
H.P. 1/4
Volts 115/60/1
Amps 5.4
NEMA 5-15P
Ship Wt. 517 lbs.
33
" DEEP EQUIPMENT
Length
Model No. 60324A
Height* 73.75"
Doors (2) 1/2 size
Storage
(Cu. Ft.) 11.2
H.P. 1/4
Volts 115/60/1
Amps 5.4
NEMA 5-15P
Ship Wt. 585 lbs.
29
" DEEP EQUIPMENT
Length
Height* 73.75"
Doors (2) 1/2 size
Storage
(Cu. Ft.) 7
H.P. 1/2
Volts 115/60/1
Amps 11.1
NEMA 5-15P
Ship Wt. 610 lbs.
24"
33
" DEEP EQUIPMENT
Length
Model No. 63324A
Height* 73.75"
Doors (2) 1/2 size
Storage
(Cu. Ft.) 7.85
H.P. 1/2
Volts 115/60/1
Amps 11.1
NEMA 5-15P
Ship Wt. 610 lbs.
* All units on 6" high adjustable, movable legs.
24"
24"
29
" DEEP EQUIPMENT
Length
24"
Height* 73.75"
Doors (2) 1/2 size
Storage
(Cu. Ft.) 9.48
H.P. 1/3
Volts 115/60/1
Amps 8
NEMA 5-15P
Ship Wt. 625 lbs.
Refrigerator
Freezer
33
" DEEP EQUIPMENT
Length
24"
Model No. 62324A
Height* 73.75"
Doors (2) 1/2 size
Storage
(Cu. Ft.) 11.2
H.P. 1/3
Volts 115/60/1
Amps 8
NEMA 5-15P
Ship Wt. 625 lbs.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 71
Custom Remote Worktop Freezer models 64000A
model 64335A 64338A 64341A 64352A 64358A 64364A
Description:
Remote freezer base with 16 gauge reinforced stainless steel
top, and integral backsplash with 45˚ return. Stainless steel
doors on concealed hinges. CFC free, R-404a refrigeration
system. Condensing unit and controls not provided. Evaporator
blower coil with expansion valve supplied and installed. Unit
with automatic defrost system, and heated door frames. 6" high
adjustable and movable legs.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4".
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Exterior body
to be corrosion resistant steel. Door opening frame to be ABS
and contain magnetic strip for positive sealing of gaskets and
heater elements to prevent gasket freezing. Back-up element
installed. Work surface to be at 36" work height. Legs to be 6"
high stainless steel with adjustable bullet foot. Legs mounted to
full length channel frame assembly which is integrally welded
to bottom of body assembly. Legs can be moved left to right to
avoid floor obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at
ends only. Stainless steel interior liner to be coved cornered to
form bottom, back and top. One baked enamel finished shelf
provided behind each door. Unit insulation to be CFC free foamed
in place urethane.
DOORS: Door fronts to be 22 gauge stainless steel with 16 gauge
stainless steel handles, magnetic gaskets, ABS door liner and
foamed in place insulation. Hinges are concealed, all stainless
steel with bronze pivot pin in nylon bushing.
REFRIGERATION: Refrigerant to be specified by customer
(Specification based on R-404a refrigerant). Interior fitted with
Randell evaporator blower coil for cooling base. Expansion valve
and refrigeration lines provided and installed for connection at
unit rear. Blower coil fitted with expansion valve for fast recovery
and automatic defrost heater system with digital control and
safety switches. Condensing unit not provided. Unit totally
prewired to junction box for 115V operation.
Shown with optional finished end.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• Foamed in place “CFC free” urethane insulation
• Refrigeration system utilizes “CFC free” R- 404a
refrigerant, expansion valve for fast recovery, and
digital control for field adjustability and solenoid value
• Automatic coil defrost system
• 45˚ integral stainless backsplash is standard. 90˚
stainless backsplash is optional.
• Front breathing louver design allows sealing to wall &
curb mounting without special requirements
• Precise temperature settings, LED temperature readout
• Filter dryer installed on liquid line
Options & Accessories:
Stainless Steel Ends
Stainless Steel Back
Casters in lieu of legs
Flat Top with no backsplash
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 26
Revised 09/04
Page 72
64000A Series
.25" LIQUID, .375" SUCTION
CONDENSATE DRAIN 1/2 "
PVC 8-1/2" AFF.
EVAPORATOR COIL
& DEFROST CONTROL
115V-60Hz-1Ph
AFF. = ABOVE FIXED FLOOR
LEGEND FOR
MODEL # 64000A
R134A REFRIG.
LOCATION
DIGITAL TEMP.
JUNCTION BOX
R-22 REFRIG.
R404 REFRIG.
CHOOSE ONE:
LINE 8.5" AFF
OC
OR
J
33"
36"
42.75"
OR
OC
J
25"
6"
COIL
PANEL
27"FREEZER 27"FREEZER
64"
24"FREEZER
PANEL
COIL
24"FREEZER
58"
PANEL
COIL
21"FREEZER21"FREEZER
52"
27"FREEZER
COIL
PANEL
41"
COIL
PANEL
24"FREEZER
38"
21"FREEZER
COIL
PANEL
35"
64000A SERIES REMOTE FREEZERS WITH STAINLESS STEEL TOPS
Length
35" 38" 41" 52" 58" 64"
Model 33" deep 64335A 64338A 64341A 64352A 64358A 64364A
# of doors (1) 21" (1) 24" (1) 27" (2) 21" (2) 24" (2) 27"
+ 8" coil hsg. + 8" coil hsg. + 8" coil hsg. + 4" mullion + 4" mullion + 4" mullion
+ 6"mech. hsg. + 6"mech. hsg. + 6"mech. hsg. + 6"mech. hsg. + 6"mech. hsg. + 6"mech. hsg.
Storage Cu. Ft. 5.86 6.84 7.81 11.39 13.35 15.30
33" deep
Storage Cu. Ft. 4.92 5.74 6.56 9.57 11.21 12.85
29" deep
Recommended*
H.P./Refrigerant 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a
Volt/Cycle/Phase 115/60/1
115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 6 6 6 6 6 6
Ship Wt. - lbs. 355 370 385 445 475 505
BTU Design Load 956 1015 1064 1536 1635 1734
Evap. BTU/°TD** 160 160 160 160 160 160
Some models available for
0 to -5˚F applications.
Consult factory.
* BTU loads shown are based on 100°F ambient with 30% added for usage and product loading. Final system selection should consider usage requirements
and combined loads. Recommended HP reflects Randell HP applied to self-contained (single) unit of equal storage capacity. Increasing HP may be appropriate
in some remote applications.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 73
Custom SC Worktop Freezer models 65000A
model 65343A 65346A 65349A 65366A 65372A 65396A
Description:
Self-contained freezer base unit with 16 gauge reinforced
stainless steel top, and integral backsplash with 45˚ return.
Stainless steel doors on concealed hinges. CFC free, R-404a
refrigeration system. Unit with automatic defrost system, and
heated door frames. 6" high adjustable and movable legs.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4".
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Hinged louver
panel to be stainless steel. Exterior body to be corrosion resistant
steel. Door opening frame to be ABS and contain magnetic strip
for positive sealing of gaskets and heater elements to prevent
gasket freezing. Back-up element installed. Work surface to
be at 36" work height. Legs to be 6" high stainless steel with
adjustable bullet foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of body assembly.
Legs can be moved left to right to avoid floor obstacles during
installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at
ends only. Stainless steel interior liner to be coved cornered to
form bottom, back and top. One baked enamel finished shelf
provided behind each door. Unit insulation to be CFC free foamed
in place urethane.
DOORS: Door fronts to be 22 gauge stainless steel with 16 gauge
stainless steel handles, magnetic gaskets, ABS door liner and
foamed in place insulation. Hinges are concealed, all stainless
steel with bronze pivot pin in nylon bushing.
REFRIGERATION: Refrigeration system utilizes “CFC free” R-404a
refrigerant. Condensing unit sized and installed for proper cooling
in housing at left end. Interior fitted with Randell evaporator
blower coil for cooling base. Blower coil fitted with expansion
valve for fast recovery and automatic defrost heater system
with timer and safety switches. Unit totally prewired and to be
supplied with 8' cordset for 115V operation. Standard with hot
gas condensate evaporator.
Shown with optional finished end.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• Foamed in place “CFC free” urethane insulation
• Refrigeration system utilizes “CFC free” R- 404a
refrigerant, expansion valve for fast recovery, and
digital control for field adjustability
• Automatic coil defrost system
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
• Front breathing louver design allows sealing to wall &
curb mounting without special requirements
• Precise temperature settings, LED temperature readout
Options & Accessories:
Stainless Steel Ends
Stainless Steel Back
Casters in lieu of legs
Flat Top with no backsplash
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 27
Revised 08/06
Page 74
65000A Series
J
J-BOX 26" AFF
120V-60-1PH
33"
36"
42.75"
27"FREEZER 27"FREEZER
72"
24"FREEZER 24"FREEZER
66"
27"FREEZER
49"
24"FREEZER
46"
HP
J
21"FREEZER
COMPR. HSG.
43"
24"FREEZER 24"FREEZER24"FREEZER
AFF = ABOVE FINISHED FLOOR
HP COMPRESSOR
JUNCTION BOX 26" AFF
115V/60Hz/1Ph
8' LONG CORD SET
HP
LEGEND FOR
MODEL # 65000A
96"
65000A SERIES (COMPRESSOR LEFT) SELF-CONTAINED FREEZERS WITH STAINLESS STEEL TOPS
Length 43” 46” 49” 66” 72” 96”
Model (33" deep) 65343A 65345A 65349A 65366A 65372A 65396A
# of Doors (1) 21" + 8”
coil hsg.
(1) 24" + 8”
coil hsg.
Min. Compr. Hsg. 14” 14” 14” 14” 14” 18”
Storage Cu. Ft.
(33” deep)
Storage Cu. Ft.
5.86 6.84 7.81 13.35 15.30 20.19
4.92 5.74 6.56 11.21 12.85 16.95
(29” deep)
H.P./Refrigerant 1/3HP/404A 1/3HP/404A 1/3HP/404A 1/2HP/404A 1/2HP/404A 3/4HP/404A
Volt/Cycle/Phase 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 10 10 10 10.9 10.9 12.5
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-20P
Ship Wt. (LBS) 415 430 445 545 575 1400
*BTU Design 742 780 818 1258 1334 1786
*BTU System Capacity 1135 1135 1135 1737 1737 2420
*BTU calculations based on 100˚F ambient
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
(1) 27" + 8”
coil hsg.
(2) 24" + 4”
mullion
(2) 27" + 4”
mullion
(3) 24" + 4”
mullion
Page 75
Custom Remote Ice Cream Cabinet models 66000AR
model 66318AR 66331AR 66343AR
Description:
Remote refrigerated ice cream storage and dipping cabinet. 16
gauge stainless steel top, and integral backsplash with 45˚ return.
Die-stamped openings in top with insulated lids. Stainless steel
fronts, stainless steel interior with welded-in-place refrigeration
lines. 6" high adjustable and movable legs.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 5/8" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4".
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Top to have
die-stamped cut-outs with raised rims, fitted with removable,
hinged, insulated lids. Exterior body to be corrosion resistant
steel. Front panels to be removable, constructed of 22 gauge
die-stamped stainless steel. Louver panel to be die-stamped
stainless steel. Work surface to be at 36" work height. Legs to be
6" high stainless steel with adjustable bullet foot. Legs mounted
to full length channel frame assembly which is integrally welded
to bottom of body assembly. Legs can be moved left to right to
avoid floor obstacles during installation.
CABINET INTERIOR: Unit interior to be stainless steel, with interior
sides to be wrapped with refrigerating lines held firmly in place
with holding clips welded to unit body. Unit insulation to be CFC
free foamed in place urethane.
REFRIGERATION: Cooling system to utilize R-404a refrigerant,
specify if otherwise. Expansion valve and refrigeration lines
provided and installed for connection at unit rear. Syrup rail
cooled by refrigeration line installed and attached to sealed
stainless interior rail liner. Condensing unit control and solenoid
provided. Unit totally prewired to junction box.
Shown with optional finished end.
Standard Features:
• Refrigeration system set up for R-404a refrigerant,
(specify if otherwise)
• Expansion valve and refrigeration lines provided and installed
for field connection
• Superb low temperature unit for ice cream storage
and dipping
• Stainless steel interior allows double stacking of standard
3 gallon containers
• Foamed in place “CFC free” urethane insulation
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
This equipment is intended for use in rooms having an ambient
temperature of 86˚F (30˚C) or less.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 28
Revised 09/04
Page 76
66000AR Series
CONNECTION:
1/4 " LIQUID,
R-22 REFRIG.
R134A REFRIG.
R404 REFRIG.
LINE 8 1/2 " AFF
3/8 " SUCTION
AFF =
20" AFF
BTU's
Amps
ABOVE FIXED FLOOR
EXPANSION VALVE
120V/60Hz/1Ph
CHOOSE ONE:
REFRIGERANT
OR
V
MODEL #66000AR
LEGEND FOR
36"
42.75"
33"
PANEL
43"
PANEL
31"
V
OR
PANEL
18"
5"
29" Deep Equipment
Length 18" 31" 43"
Height* 36" 36" 36"
Storage
Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 1 1 1
BTU’s 383 688 985
Ship Wt. 208 lbs. 297 lbs. 375 lbs.
33" Deep Equipment
Length 18" 31" 43"
Model No. 66318AR 66331AR 66343AR
Height* 36" 36" 36"
Storage
Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 1 1 1
BTU’s 401 712 1015
Ship Wt. 208 lbs. 297 lbs. 375 lbs.
* All units on 6" high adjustable, movable legs for 35 1/2" to 36 3/4" high work surface.
BTU load based on 100˚F ambient, 7˚ ice cream
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 77
Custom SC Ice Cream Cabinet models 67000A
model 67332A 67345A 67357A
Description:
Self-contained ice cream storage and dipping cabinet with R404a cooling system. 16 gauge stainless steel top, and integral
backsplash with 45˚ return. Die-stamped openings in top with
insulated lids. Stainless steel fronts, stainless steel interior with
welded-in-place refrigeration lines. 6" high adjustable and
movable legs.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 5/8" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 5/8".
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Top to have
die-stamped cut-outs with raised rims, fitted with removable,
hinged, insulated lids. Exterior body to be corrosion resistant
steel. Front panels to be removable, constructed of 22 gauge
die-stamped stainless steel. Louver panel to be die-stamped
stainless steel. Work surface to be at 36" work height. Legs to be
6" high stainless steel with adjustable bullet foot. Legs mounted
to full length channel frame assembly which is integrally welded
to bottom of body assembly. Legs can be moved left to right to
avoid floor obstacles during installation.
CABINET INTERIOR: Unit interior to be stainless steel, with interior
sides to be wrapped with refrigerating lines held firmly in place
with holding clips welded to unit body. Unit insulation to be CFC
free foamed in place urethane.
Shown with optional finished end, sink and dipperwell.
Standard Features:
• Refrigeration system features “CFC free” R-404a refrigerant,
expansion valve for fast recovery and even temperature
regulation
• Superb low temperature unit for ice cream storage and
dipping
• Stainless steel interior allows double stacking of standard 3
gallon containers
• Foamed in place “CFC free” urethane insulation
• Sink and dipper well available option
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
REFRIGERATION: Cooling system to utilize R-404a refrigerant.
Expansion valve fitted to refrigeration line with pressure control
installed for temperature control. Condensing unit sized and
installed for proper cooling in housing at right end. Unit totally
prewired and to be supplied with 8' cordset (NEMA 5-15P) for
115V operation.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 29
Revised 08/05
Page 78
67000A Series
MODEL # 67000A
115V/60Hz/1Ph
EXPANSION VALVE
HP COMPRESSOR
AFF = ABOVE FIXED FLOOR
JUNCTION BOX 26" AFF
CONDENSATE DRAIN 1/2"
PVC 10" AFF.
20 AFF.
V
(NEMA 5-15P)
8' LONG CORD SET
OC
HP
LEGEND FOR
36"
42.75"
33"
3
gal
3
gal
3
gal
3
gal
gal
3
gal
3
57"
gal
gal
3
gal
3
3
gal
3
45"
HP
J
V
OC
3
gal
3
gal
MTD.BELOW J-BOX
EXPANSION VALVE
COMPR. HSG.
32"
6"
14"
13"
29" Deep Equipment
Length 32" 45" 57"
Height* 36" 36" 36"
Storage
Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 6.5 6.5 6.5
NEMA 5-15P 5-15P 5-15P
Ship Wt. 295 lbs. 375 lbs. 448 lbs.
33" Deep Equipment
Length 32" 45" 57"
Model No. 67332A 67345A 67357A
Height* 36" 36" 36"
Storage
Capacity 12 gal. 24 gal. 36 gal.
H.P. 1/3 1/3 1/3
Volts 115/60/1 115/60/1 115/60/1
Amps. 6.5 6.5 6.5
NEMA 5-15P 5-15P 5-15P
Ship Wt. 295 lbs. 375 lbs. 448 lbs.
* All units on 6" high adjustable, movable legs for 35 1/2" to 36 3/4" high work surface.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 79
Custom Remote Ice Cream Cabinet models 68000AR
model 68331AR 68343AR
29
Description:
Remote refrigerated ice cream storage and dipping cabinet.
16 gauge stainless steel top, and integral backsplash with
45˚ return. Die-stamped openings in top with insulated lids,
refrigerated syrup rail with jars, lids, and pumps. Stainless steel
fronts, stainless steel interior with welded-in-place refrigeration
lines. 6" high adjustable and movable legs
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16
gauge stainless steel with 2 5/8" nosing. Ends at top fitted with
recessed heavy duty steel bars for field bolting units together,
producing a hairline seam. Top to have die-stamped cut-outs
with raised rims, fitted with removable, hinged, insulated lids.
6" high insulated syrup rail furnished with syrup pumps, lids with
ladles, and plastic jars. Exterior body to be corrosion resistant
steel. Front panels to be removable, constructed of 22 gauge
die-stamped stainless steel. Work surface to be at 36" work
height. Legs to be 6" high stainless steel with adjustable bullet
foot. Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be
moved left to right to avoid floor obstacles during installation.
CABINET INTERIOR: Unit interior to be stainless steel, with interior
sides to be wrapped with refrigerating lines held firmly in place
with holding clips welded to unit body. Unit insulation to be CFC
free foamed in place urethane.
REFRIGERATION: Cooling system to utilize R-404a refrigerant,
specify if otherwise. Expansion valve and refrigeration lines
provided and installed for connection at unit rear. Syrup rail
cooled by refrigeration lines installed and attached to sealed
stainless interior rail liner. Condensing unit control and solenoid
provided. Unit totally prewired to junction box.
˚ deep unit s
Standard Features:
• Refrigeration system set up for R-404a refrigerant, (specify if otherwise)
• Expansion valve and refrigeration lines provided and
installed for field connection
• Refrigerated syrup rail supplied with pumps, jars and lids
• Superb low temperature unit for ice cream storage and dipping
• Stainless steel interior allows double stacking of standard
3 gallon containers
• Foamed in place “CFC free” urethane insulation.
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
hown with optional finished end.
This equipment is intended for use in rooms having an ambient
temperature of 86˚F (30˚C) or less.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 30
Revised 09/04
Page 80
68000AR Series
hp RECOMMENDED
3/8 " SUCTION
LINE 8 1/2 " AFF
120V/60Hz/1Ph
R134A REFRIG.
1/4 " LIQUID,
CONNECTION:
REFRIGERANT
R404 REFRIG.
R-22 REFRIG.
CHOOSE ONE:
BTU's
Amps
OR
MODEL #68000A
ABOVE FIXED FLOOR
EXPANSION VALVE
20" AFF
LEGEND FOR
AFF =
V
43.75"
42.75"
36"
33"
PANEL
43"
V
OR
PANEL
31"
5"
29" Deep Equipment
Length 31" 43"
Height* 36" 36"
Standard Equipment in a 31" Rail
(3) Syrup Pumps
(3) Fruit Jars with ladles
Storage
Capacity 24 gal. 36 gal.
H.P. 1/3 1/3
Volts 115/60/1 115/60/1
Standard Equipment in a 43" Rail
(4) Syrup Pumps
(4) fruit Jars with ladles
Amps. 1 1
BTU’s 505 795
Ship Wt. 308 lbs. 350 lbs.
33" Deep Equipment
Length 31" 43"
Model No. 68331AR 68343AR
Height* 36" 36"
Storage
Capacity 24 gal. 36 gal.
H.P. 1/3 1/3
Volts 115/60/1 115/60/1
Amps. 1 1
BTU’s 726 1020
Ship Wt. 308 lbs. 350 lbs.
* All units on 6" high adjustable, movable legs for 35 1/2" to 36 3/4" high work surface.
BTU load based on 100˚F ambient, 7˚ ice cream, 45˚ rail temperature.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 81
Custom SC Ice Cream Cabinet models 69000A
model 69345A 69357A
Description:
Self-contained ice cream storage and dipping cabinet with R404a cooling system. 16 gauge stainless steel top, and integral
backsplash with 45˚ return. Die-stamped openings in top with
insulated lids. Stainless steel fronts, stainless steel interior with
welded-in-place refrigeration lines. 6" high adjustable and
movable legs.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 5/8" nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4".
Ends at top fitted with recessed heavy duty steel bars for field
bolting units together, producing a hairline seam. Top to have
die-stamped cut-outs with raised rims, fitted with removable,
hinged, insulated lids. Exterior body to be corrosion resistant
steel. Front panels to be removable, constructed of 22 gauge
die-stamped stainless steel. Louver panel to be die-stamped
stainless steel. Work surface to be at 36" work height. Legs to be
6" high stainless steel with adjustable bullet foot. Legs mounted
to full length channel frame assembly which is integrally welded
to bottom of body assembly. Legs can be moved left to right to
avoid floor obstacles during installation.
CABINET INTERIOR: Unit interior to be stainless steel, with interior
sides to be wrapped with refrigerating lines held firmly in place
with holding clips welded to unit body. Unit insulation to be CFC
free foamed in place urethane.
REFRIGERATION: Cooling system to utilize R-404a refrigerant.
Expansion valve fitted to refrigeration line with pressure control
installed for temperature control. Condensing unit sized and
installed for proper cooling in housing at right end. Unit totally
prewired and to be supplied with 8' cordset (NEMA 5-15P) for
115V operation.
Shown with optional finished end, sink and dipperwell.
Standard Features:
• Refrigeration system features “CFC free” R-404a refrigerant,
expansion valve for fast recovery and even temperature
regulation
• Superb low temperature unit for ice cream storage and
dipping
• Stainless steel interior allows double stacking of standard 3
gallon containers
• Foamed in place “CFC free” urethane insulation
• Sink and dipper well available
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚ stainless
backsplash is optional.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 31
Revised 08/05
Page 82
69000A Series
MTD.BELOW J-BOX
8' LONG CORD SET
20 AFF.
EXPANSION VALVE
(NEMA 5-15P)
PVC 10" AFF.
CONDENSATE DRAIN 1/2"
EXPANSION VALVE
V
OC
LEGEND FOR
HP COMPRESSOR
AFF = ABOVE FIXED FLOOR
115V/60Hz/1Ph
JUNCTION BOX 26" AFF
MODEL # 69000A
HP
36"
43.75"
42.75"
33"
3
gal
3
gal
3
gal
3
gal
3
gal
3
gal
57"
OC
HP
J
V
3
gal
3
gal
3
gal
3
gal
COMPR. HSG.
45"
14"
6"
13"
29" Deep Equipment
Length 45" 57"
Height* 36" 36"
Storage
Capacity 24 gal. 36 gal.
H.P. 1/3 1/3
Volts 115/60/1 115/60/1
Amps. 6.5 6.5
NEMA 5-15P 5-15P
Ship Wt. 418 lbs. 458 lbs.
33" Deep Equipment
Length 45" 57"
Model No. 69345A 69357A
Height* 36" 36"
Storage
Capacity 24 gal. 36 gal.
H.P. 1/3 1/3
Volts 115/60/1 115/60/1
Amps. 6.5 6.5
NEMA 5-15P 5-15P
Ship Wt. 418 lbs. 458 lbs.
* All units on 6" high adjustable, movable legs for 35 1/2" to 36 3/4" high work surface.
Designed for 7˚ ice cream, 45˚ rail temperature.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Page 83
Custom Add On Units models 70000 & 80000
model 83214 83314 83218 83318 83220 83320 82212 83224
83324 87124 87212 87312 88124 88216 88316
83000 Series
Stainless steel top extension
with front panel. Sink with
deck mounted faucet, and
drain basket - shipped loose.
Unfinished ends.
87100 Series
29" long x 22" deep top extension
with front panel, supplied with
two round soup wells, (Specify
7 qt. or *11 qt. & voltage.) *11
qt. requires 30" long unit.
87200 Series
12" long top extension with front panel,
supplied with two 7
qt. round soup wells.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
87300 Series
14" long top extension
with front panel, supplied
with two 11 qt. round soup
wells.
88100 Series
24" long x 22" deep top extension with
front panel, supplied with (1)12" x 20"
electric hot food well mounted below
die stamped opening in top. (Specify
Voltage -120, 208 or 240V).
Randell Custom, Page 32
88200, 88300 Series
16" long top extension with front
panel, supplied with (1) 12" x 20"
electric hot food well mounted below
die stamped opening in top. (Specify
Voltage 120, 208 or 240V).
Revised 09/04
Page 84
Custom Add On Units models 90000
model 91327 92333 93324 93346 93368 94328 98324
Description:
Add on units with 16 gauge reinforced tops, and integral
backsplash with 45˚ return. 6" high adjustable legs.
Specifications:
Tops to be one piece of die formed 16 gauge stainless steel with 2
1/2" nosing. Backsplash to be coved cornered, with 45˚ return at
top and overall height of 6 3/4". Ends at top fitted with recessed
heavy duty steel bars for field bolting units together, producing a
hairline seam. Body ends to be corrosion resistant steel. Legs to
be 6" high stainless steel with adjustable bullet foot. Legs mounted
to full length channel frame assembly which is integrally welded
to bottom of body assembly. Legs can be moved left to right to
avoid floor obstacles during installation.
Standard Features:
• Available under one piece top with other modular units up to
16' in length
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash providing access to
electrical chase is standard. 90˚ stainless backsplash
is optional.
93000 Series
Unit with 16 gauge reinforced stainless steel top. To hold glass or cup racks. 6” or 8”
spacing of angles. Full, partial or no top cut back to be provided, as specified. On 6” high
adjustable and moveable legs - unfinished ends.
94000 Series
Unit with 16 gauge reinforced stainless steel top, backsplash with accessible electrical chase to house drop-in
dispensers. Dispensers supplied by others. On 6" high
adjustable and movable legs.- unfinished ends.
91000 Series & 92000 Series
Units with 16 gauge reinforced stainless steel top. To enclose built-in food warmer.
Warmer supplied by others, installed by Randell. On 6" high adjustable and movable legs.- unfinished ends.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
98000 Series
Unit with 16 gauge reinforced stainless steel top,
backsplash with accessible electrical chase, water
glass filler and trough, and 60 Lb. ice chest. Stainless steel front panels. On 6" high adjustable legs.unfinished ends.
Randell Custom, Page 33
Revised 09/04
Page 85
Custom Design Accessories - Overshelving
Standard Deck-Mounted Overshelf
Constructed of die-formed 16 gauge stainless steel
(14 gauge is optional). Supported with stainless
tubular uprights.
Cantilevered Mounted Overshelf
Constructed of die-formed 16 gauge stainless steel
(14 gauge is optional). Supported with 1 5/8" stainless
tubular uprights.
Pass-thru Overshelf
Model # 11069 - Constructed of 16 gauge stainless
steel with solid core shelf. Provided with two piece
telescoping frame. 18" to 24" widths available on shelf.
Frame adjusts for 4 1/2" to 10" wall thickness.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Randell Custom, Page 34
Revised 09/04
Page 86
Design Accessories - Pull-Out Drawers
The Randell Patented Drawer Cartridge System!
A fully welded, unitized drawer cartridge assembly with a
quick release that allows the refrigerated drawers to be
easily removed for cleaning.
• Fully welded 14 gauge unitized Drawer Cartridge assembly.
• 14 gauge drawer tracks on 1 5/8" heavy duty stainless steel bearings.
• Heavy duty full extension tracks to accommodate 12" x 20" x 4" deep pans, two per drawer. Pans by others.
• Quick release allows drawers and liners to be removed without tools.
• Self-closing drawers with stainless steel drawer fronts & easy to grasp drawer handles.
Model C11043-21
Fits standard 21" refrigerated sections. Available in 29" or 33" deep
bases. 33" deep model supplied
with (1) 12" x 20" x 6" dp. plastic
pan per drawer.
Note: 29" deep models supplied with grey ABS tub.
Model C11043-27TE
Increases standard 24" refrigerated section 3" to 27" - 33" deep
bases only. Supplied with (2) 12"
x 20" x 4" dp. plastic pans per
drawer.
No t e:U n it b ody heig h t is
modified to accept (3) tiers
of drawers.
Model C11043-24
Fits standard 24" refrigerated sections. Available in 29" or 33" deep
bases. 33" deep model supplied
with (1) 12" x 20" x 6" dp. plastic
pan per drawer.
Model C11043-32
Increases standard 24" refrigerated section 8" to 32" - 29" or
33" deep bases.Supplied with (2)
12" x 20" x 6" dp. plastic pans
per drawer.
Model C11043-27
Increases standard 24" refrigerated section 3" to 27". - 29" or
33" deep bases.Supplied with (2)
12" x 20" x 6" dp. plastic pans
per drawer.
Model C11043-32E
Increases standard 24" refrigerated section 8" to 32" - 29" or
33" deep bases.Supplied with (2)
12" x 20" x 6" dp. plastic pans
per drawer.
Model C11043-27E
Increases standard 24" refrigerated section 3" to 27" - 33" deep
bases only. Supplied with (2) 12"
x 20" x 6" dp. plastic pans per
drawer.
Model C11043-32TE
Increases standard 24" refrigerated section 8" to 32" - 29" or
33" deep bases. Supplied with (2)
12" x 20" x 4" dp. plastic pans
per drawer.
Randell, Unified Brands 888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Loading...