Randall RH100 Owner's Manual

RH100 Owner’s Manual

100 Watt Guitar Amplifier

Master Controls:

The RH100 is equipped with Clean and Lead master controls. Each channel can be

set to your desired volume.

Preamp Controls:

This amp features two preamp channels, Gain 1 and Gain 2 for the Lead channel

and Level 1 for the Clean channel. Each can be adjusted for desired gain.

EQ Controls:

The RH100 has a three-band EQ with shape control for the lead channel and a

separate three-band EQ for the clean channel.

Effects:

Output Power:

The RH100 is equipped with a footswitchable spring reverb.

The amp offers Constant Current, solid-state technology at 100-watts of RMS

power. The RH100 is designed to handle any 4 or 8 Ohm load.

Additional Features:

This amp offers several additional features including line out with independant level
control, external speaker jack, effects loop with level controls, headphone jack,
and footswitchable channels for gain 1/gain 2, and clean channel.

Power Output: 100W . THD0.2% (at 1 KHz 8Ω)
Power Consumption: 200VA
Input Sensitivity: -46dB
Controls

(All Controls Set At 5): Bass: +/- 15db @ 50Hz

Mid: +/- 10db @ 600Hz
Treble: +/- 18db @ 3Hz
Contour: +18db @ 15Hz

Effects Loop: Send 200mV
Return 50k ohms

Signal Output: 0 db @ 600ohms
Dimensions: 885W x 335H x 345D