Rancent Tech RG59, RG59U, RG6, RG11U, RG11 User Manual

.

IR HIGH SPEED DOME CAMERA

Rancent Technologies Ltd,. 10/F Hong Kong Trade Centre, 161 Des Voeux Road Centrl, Hong Kong Tel: +852 2816 7037 Fax: +852 2855 8158

USER’S MANUAL

Table Of Contents

1 Precautions ………………………………………………

2 Features…………………………………………………

3 Technical Data……………………………………………

4 Installation Guide…………………………………………

5 Dome Settings……………………………………………

6 Preset Setting……………………………………………

7 The OSD Menu Setting…………………………………

1

2

5

6

9

13

14

1 Precautions

1.Transportation Security

No heavy stress, violent vibration or water splash are allowed during transportation,storage.The unit should be transported in separated packing.In shipments of distributor and delivery of maintenance,any damages caused by integral packing are not covered by warranty.

2.Installation

Avoid heavy stress and violent vibration during installation. Don’t touch the dome cover directly by hand. When connecting the power source, please follow all electric safety standards and only use the power supply designated for this device. Keep the video and control signal in a decent distance from high voltage devices and cable. Don’t

3.Internal Environment

entering the dome. If occur this, please shut down the power and pull out the plug. Then inform the technical personnel immediately.

4.Electrical Safety

The video image would be interfered when the dome is installed near

5.Camera Protection

Avoid shooting very bright objects directly into the camera’s CCD (such

6.Cleaning Method

Please don’t use abrasive and violent detergent to clean the dome. Please choose dry fabric and neutral detergent. Use lens paper to clean the lens.

1

2 Features

2.1 Built-in Decoder

r

2

Presets calling speed :350 /S

2.5 Function Instructions

3

Focus / Pan / Tilt Speed Auto Match

Auto Flip

The lens can auto flip when it rotates 180°

Preset Position Setting and Calling

Preset function means the speed dome can memory current pan/tilt angel, focus, zoom, ect. When need, it can be called upon directly. Our speed dome support up to 220 preset positions.

Auto Scan

Users can set the left and right boundaries by control keyboard. Then speed dome can scan between it. It can set up to 8 groups scan path.

Pattern Tour

Speed Dome can memory 180s running path or 500 orders. When start pattern tour, speed dome can track as recording path. It supports 4 groups pattern tour.

Guard Location

The dome will rotate back to preset position after a period of vacant time.

Privacy Protection Function

Set black areas to mask the privacy or security parts. The black areas locationcan be set, and support up to 8 mask zones.

Timing Running Function

Users can set speed dome operation task at different time during one week.

Motion Detection Function

For some special cameras, the dome can auto track the moving things.

3D Location Function In dome effective zoom scope, can zoom in and out any area on screen, also can move any point to center.

Auto Tracking Function IR speed dome can automatically ock and tacking the moving object according to the parameters setup .

Ɣ

The pan/tilt rotation speed could be auto adjusted according to the focus in/out, which makes it great performance for manual target tracking.

4

Ɣ

Zoom Control Users can control zoom by keyboard to get near or far images.

Auto Iris Control Auto sense ambient light, and make quick adjustments.

Auto Back Compensation In the bright background, auto compensate light for the target, and adjust the back light.

Auto/Manual White Balance Auto/Manual adjust depending on the environment light changes.

Day and Night Switch (Only for Day/Nigh Camera) Speed dome camera can auto switch between color and black and white.

High Speed Dome Menu Setup (Only for camera with menu) Call upon preset No.95 to enter into menu setup interface. Press “Focus” to choose menu items and press “Iris” to set menu contents.

Alarm Function It supports 4-channel alarm input and 2-channel alarm output .

Lens Control

3 Technical Data

PowerPower Supply

Operating Temperature

Operating moisture

Power Consumption

Communication

Communication transmission speed

Protocols

Pan speed

Titlt Angle

Pan/Tilt Accuracy

Preset Speed

Pan Angle

Auto Filp

Preset Positions

Auto Scan

Cruise Track

Cruise Points Qty per cruise group

Pattern Tours

Alarm

Privacy Zone

Protection

DC12V & 5A

Indoor˖050§Outdoor˖-3560ć

< 95%

Indoor˖15W Outdoor˖55W

RS-485 bus

2400/4800/9600BPS

Pelco-D, Pelco-P,HS

0.01°-180° /s

0 -90°

+/- 0.05°

350°/s

360° Continuously

auto flip 180° when tilt angle is 90 °

220

8 Groups

32 Preset Positions

4 Groups

4 alarm inputs and 2 outputs

8 zones

IP66 water proof/3000V lightning proof

5

4 Installation Guide

4.1 Installation Preparation

Video Coaxial Cables

4.2 Structure

4.3 Installation Size

Mode

RG59/U

RG6/U

RG11/U

Max Distance

750ft(229m)

1,000ft(305m)

1,500ft(457m)

6

4.4 Installation Procedures

*Notice: The wall must be thick enough to install the expansion

screws and can bear 4 times the weight of the dome camera itself.

(1) Bore 4 holes by using templates included on the wall.

(2) Mount 4 M8 expansion screws into the holes

7

(3) Put the cables through the bracket. Fix the dome base and the

bracket with M5 screws.

8

(4) Use screw-caps and shims to fix the bracket on the wall.

5 Dome Setting

Protocol Setting

Transmission Speed Setting

9

Before the dome is installed,the communication protocol, baud rate and dome address, should be confirmed.Set the DIP switch, keeping the setting consistent with the control system. The relative DIP switch site and connecting wires are diagramed below for reference.

SW1 is address setting switch,SW2 is protocol setting switch.

ON

DIP

ON

DIP

Protocol SW2-1 SW2-2 SW2-3 SW2-4

HS OFF OFF OFF OFF

PELCO P ON OFF OFF OFF

PELCO D OFF ON OFF OFF

Reserve ... ... ... ...

Baud Rate

9600

4800

2400

Reserve

SW2-5

OFF

ON

OFF

...

SW2-6

OFF

ON

...

Dome Address Setting

10

PELCO-P & HS protocol

Address

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

...

254

255

SW1-1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

...

1

0

SW1-2

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

...

0

1

SW1-3

0

1

0

1

0

1

0

1

...

1

SW1-4

0

1

0

1

...

1

SW1-5

0

1

...

1

SW1-6

0

...

1

SW1-7

0

...

1

SW1-8

0

...

1

PELCO-D protocol

11