Rampage 7710 User Manual

Page

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.

However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Note: Modifications to this product will void the user’s authority to operate this equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.

Operation

Page 2

Set on your vehicle
The wifi device comes with magnets. Use the device attach to your vehicle back like following picture.

Dust ring

The dust ring can be rotated to cover the lens and plugs when the camera is not in use.

Charging

With power switch in off position, connect the camera to a computer or power supply with the
included USB cable. While charging, the red light will illuminate and then shut off when it is fully
charged. The camera can be operated while charging; this will be indicated by the blue light
flashing and the red light staying solid.

Downloading IOS App & Android App

Please download the appropriate app for your device. The IOS app is available free in the Appl e
Store, and the Android app free in the Google Play store. Search for “Ramcam” to locate.
Power on/Connecting to the App

Slide the on switch to “ON” position. When blue light stays solid the device is in startup mode.
Once the blue light begins to slowly blink it is ready to connect to your device. NOTE: For IOS
(Apple) the WiFi must be connected before using the app, connect to the cameras WiFi hotspot
before opening the app (instruction) below). For Android, WiFi will connect automatically when the
app is opened.

To connect to the WiFi on an IOS device:

Open “Settings”, find the “WiFi” tab and open it, watch for a WiFi device named
“fh8610cam-aca******”, select it, and then use the default password:”12345678” when prompted.
Once the device is connected, exit “Settings” and open the RamCam app. Please follow blows

Page 3

pictures:

Picture 1

Picture 2