RAM Mount VB-154-SW1 User Manual

Item Number

RAM No-Drill TM Seat Bases

RAM-VB-154 & RAM-VB-154-SW1

Vehicle base for the

NISSAN PATHFINDER (2005-2012)
NISSAN XTERRA 4X4 ONLY (2005-2012)
NISSAN FRONTIER 4X4 ONLY (2005-2012)

SPECIFICATIONS

Placement

Passenger side, front, where seat rail frame
attaches to floor board.

Drilling Required

No - uses existing seat bolts

Seat Configuration

Bucket

National Products, Inc.

Construction/Finish

Steel/Black Powdercoat

Pole or Pedestal

Sold Separately

Weight

2.8 lbs.

Dimensions

A = 20.25", B = 7.25", C = 3.5"
Hole Center = 17.25"

Features

Installs in minutes with no drilling required
Low profile keeps mount away from passenger leg space

Misc.

Rock solid construction
Lifetime warranty

National Products, Inc.
Phone: [phone]
Fax: [phone]
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [e-mail]

RAM-VB-154-SW1

RAM-VB-154

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.

Item Number

RAM-VB-154 & RAM-VB-154-SW1

RAM No-Drill TM Seat Bases

National Products, Inc.

Vehicle base for the

NISSAN PATHFINDER (2005-2012)
NISSAN XTERRA 4X4 ONLY (2005-2012)
NISSAN FRONTIER 4X4 ONLY (2005-2012)

INSTALLATION INSTRUCTIONS

1. Move the passenger seat back to its rearmost position and remove the front seat rail bolts. Store these bolts.

2. Without moving the seat, place the No-Drill™ base over the front of the seat frame

3. Align the holes in the metal base with those in the seat frame and floor board.

4. Re-install the new longer seat bolts and washers included with your kit and fully tighten.

National Products, Inc.
Phone: [phone]
Fax: [phone]
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [e-mail]

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.