RAM Mount VB-150-SW1 User Manual

Item Number

RAM-VB-150

Vehicle base for the

SCION xB (2005-2007)

SPECIFICATIONS

Placement

Passenger side on the floor, under front seat

RAM No-Drill TM Seat Bases

National Products, Inc.

Drilling Required

No - uses existing seat bolts

Seat Configuration

Bucket

Construction/Finish

Steel/Black Powdercoat

Dimensions

Length = 18.125”, Depth = 9.625”
Height = 2.25”, Hole Centers = 16.625"

Pole or Pedestal

Sold Separately

Weight 4.8 lbs.

Features

Installs in minutes with no drilling required
Low profile keeps mount away from passenger leg space

Misc.

Rock solid construction

Shown In Use

Lifetime warranty

National Products, Inc.
Phone: [phone]
Fax: [phone]
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [e-mail]

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.

RAM-VB-150

Item Number

RAM-VB-150

RAM No-Drill TM Seat Bases

National Products, Inc.

Vehicle base for the

SCION xB (2005-2007)

INSTALLATION INSTRUCTIONS

1. Move the passenger seat back to its rearmost position and remove the front seat rail bolts. Store these bolts.

2. Without moving the seat, place the No-Drill TM base over the front of the seat frame legs.

3. Align the holes in the base with those of the seat frame legs. The pedestal platform should be near the console.

4. Using the supplied longer seat bolts and washers, secure the no drill base over the seat frame legs.

5. Fully tighten the seat leg bolts. It is suggested to start these bolts by hand to avoid cross threading.

National Products, Inc.
Phone: [phone]
Fax: [phone]
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [e-mail]

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.