RAM Mount Gun Holster Bracket Clip User Manual

INSTRUCTIONS FOR GUN HOLSTER BRACKET CLIP

Parts Index

A . RAM HANDGUN HOLSTER BRACKET CLIP (QTY. 1)

B. #10-24 X ½ BLACK PHILIPS DRIVE STEEL MACH. SCREW (QTY. 3)

C. #10-24 BLACK THIN STAINLESS STEEL NYLOCK NUT (QTY. 3)

D. 1/4”-20 X ½” BLACK CARRIAGE BOLT (QTY. 1)

E. 1/4”-20 BLACK STEEL WING NUT (QTY. 1)

1. ATTACH BALL BASE TO BACK OF (A) BRACKET CLIP USING (B) SCREWS AND (C) NUTS.

A

B

2. SLIDE (A) BRACKET CLIP THROUGH BELT INSERT ON HOLSTER.

3. INSERT (D) CARRIAGE BOLT FROM UNDER BRACKET CLIP THROUGH BOTH SQUARE HOLES.
PRESS ENDS OF BRACKET TOGETHER AND TIGHTEN (E) WINGNUT ONTO (D) CARRIAGE BOLT.

D

C

BALL BASE MAY NOT BE INCLUDED

A

E

HOLSTER NOT INCLUDED

B

C

D

E

National Products, Inc., 8410 Dallas Ave S., Seattle, WA 98108, [phone] www.ram-mount.com

INSTRUCTIONS FOR GUN HOLSTER BRACKET CLIP

Parts Index

A . RAM HANDGUN HOLSTER BRACKET CLIP (QTY. 1)

B. #10-24 X ½ BLACK PHILIPS DRIVE STEEL MACH. SCREW (QTY. 3)

C. #10-24 BLACK THIN STAINLESS STEEL NYLOCK NUT (QTY. 3)

D. 1/4”-20 X ½” BLACK CARRIAGE BOLT (QTY. 1)

E. 1/4”-20 BLACK STEEL WING NUT (QTY. 1)

1. ATTACH BALL BASE TO BACK OF (A) BRACKET CLIP USING (B) SCREWS AND (C) NUTS.

C

A

B

2. SLIDE (A) BRACKET CLIP THROUGH BELT INSERT ON HOLSTER.

3. INSERT (D) CARRIAGE BOLT FROM UNDER BRACKET CLIP THROUGH BOTH SQUARE HOLES.
PRESS ENDS OF BRACKET TOGETHER AND TIGHTEN (E) WINGNUT ONTO (D) CARRIAGE BOLT.

A

B

C

RMR-INS-GUN1

D

E

E

D

National Products, Inc., 8410 Dallas Ave S., Seattle, WA 98108, [phone] www.ram-mount.com

HOLSTER NOT INCLUDED

BALL BASE MAY NOT BE INCLUDED

RMR-INS-GUN1