RAM Mount Extension Pole with Sockets User Manual
RAM EXTENSION POLE WITH SOCKETS
ASSEMBLY INSTRUCTIONS
PARTS INDEX:
A. BLACK PVC PIPE (QTY. 1)
(PIPE LENGTH MAY VARY)
B. PIPE CAP WITH OCTAGON BUTTON (QTY. 2)
C. SINGLE SOCKET ARM FOR 1” BALL (QTY. 1)
D. SINGLE SOCKET ARM FOR 1.5” BALL (QTY. 1)
A
D
C
B
1. PRESS FIT (B) PIPE CAPS TO EACH END OF (A) PIPE.
PVC CEMENT MAY BE USED IF DESIRED.
B
3. PLACE OCTAGON BUTTON FROM (B) PIPE CAP OVER (C) SOCKET ARM
HALF. REASSEMBLE SOCKET ARM ONTO OCTAGON BUTTON.
C
(D) SOCKET ARM CLAMPS TO ANY 1.5” BALL BASE, AND (C) SOCKET ARM CLAMPS TO ANY RAM 1” BALL ADAPTER OR RAM EXTENSION PIPE.
THIS EXTENSION PIPE IS INTENDED FOR CALM ENVIRONMENTS. EXTRA STABILIZATION AND PVC CEMENT MAY BE REQUIRED
WHEN MOUNTED TO ANY VEHICLE TO PROTECT AGAINST VIBRATION. SAFETY TETHER IS RECOMMENDED WHEN NECESSARY.
B
A
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.rammount.com
2. DISASSEMBLE (C) 1” SOCKET ARM AS SHOWN.
KEEP WASHERS IN THEIR POSITION
4. REPEAT STEPS 2 AND 3 FOR (D) 1.5” SOCKET
ARM, ONTO OPPOSITE (B) PIPE CAP.
RPR-INS-CB-201
RAM EXTENSION POLE WITH SOCKETS
ASSEMBLY INSTRUCTIONS
PARTS INDEX:
A. BLACK PVC PIPE (QTY. 1)
(PIPE LENGTH MAY VARY)
B. PIPE CAP WITH OCTAGON BUTTON (QTY. 2)
C. SINGLE SOCKET ARM FOR 1” BALL (QTY. 1)
D. SINGLE SOCKET ARM FOR 1.5” BALL (QTY. 1)
1. PRESS FIT (B) PIPE CAPS TO EACH END OF (A) PIPE.
PVC CEMENT MAY BE USED IF DESIRED.
B
3. PLACE OCTAGON BUTTON FROM (B) PIPE CAP OVER (C) SOCKET ARM
HALF. REASSEMBLE SOCKET ARM ONTO OCTAGON BUTTON.
C
(D) SOCKET ARM CLAMPS TO ANY 1.5” BALL BASE, AND (C) SOCKET ARM CLAMPS TO ANY RAM 1” BALL ADAPTER OR RAM EXTENSION PIPE.
B
A
A
C
B
2. DISASSEMBLE (C) 1” SOCKET ARM AS SHOWN.
KEEP WASHERS IN THEIR POSITION
4. REPEAT STEPS 2 AND 3 FOR (D) 1.5” SOCKET
ARM, ONTO OPPOSITE (B) PIPE CAP.
D
THIS EXTENSION PIPE IS INTENDED FOR CALM ENVIRONMENTS. EXTRA STABILIZATION AND PVC CEMENT MAY BE REQUIRED
WHEN MOUNTED TO ANY VEHICLE TO PROTECT AGAINST VIBRATION. SAFETY TETHER IS RECOMMENDED WHEN NECESSARY.
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.rammount.com
RPR-INS-CB-201
Loading...