RAM Mount Double suction Cup Base User Manual
RAM DOUBLE SUCTION CUP BASE ASSEMBLY INSTRUCTIONS
PARTS INDEX:
A. DOUBLE SUCTION ADAPTER PLATE (QTY. 1)*
B. RAM™ TWIST-LOCK SUCTION CUP (QTY. 2)
C. #10 X 3/4” SHEET METAL SCREW (QTY. 4)
D. #8-32 X ½” MACHINE SCREW (QTY. 4)*
E. #8-32 THIN NYLOCK NUT (QTY. 4)*
*ADAPTER PLATE AND HARDWARE QUANTITIES MAY VARY BASED ON KIT PURCHASED
ASSEMBLE (A) ADAPTER PLATE WITH BOTH (B)
SUCTION CUPS USING (C) SCREWS AS SHOWN BELOW.
DO NOT OVER-TIGHTEN SCREWS.
C
C
C
C
A
ALTERNATE
ADAPTER PLATE
ATTACH RAM BALL BASE TO (A) ADAPTER PLATE USING (D) SCREWS AND (E) NUTS.
THREAD ALL SCREWS AND NUTS BY HAND FIRST, THEN TIGHTEN USING PHILLIPS
HEAD SCREWDRIVER AND ADJUSTABLE WRENCH.
D
E
D
B
C
D
E
BALL BASE NOT INCLUDED
IN ALL KITS: RAM-B-202U
FOR PROPER SUCTION, MAKE
SURE SURFACE HAS NO CRACKS
OR SCRATCHES, AND HAS BEEN
THOROUGHLY CLEANED.
ALTERNATE
ADAPTER PLATE
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.rammount.com
RAM DOUBLE SUCTION CUP BASE ASSEMBLY INSTRUCTIONS
PARTS INDEX:
A. DOUBLE SUCTION ADAPTER PLATE (QTY. 1)*
B. RAM™ TWIST-LOCK SUCTION CUP (QTY. 2)
C. #10 X 3/4” SHEET METAL SCREW (QTY. 4)
D. #8-32 X ½” MACHINE SCREW (QTY. 4)*
E. #8-32 THIN NYLOCK NUT (QTY. 4)*
*ADAPTER PLATE AND HARDWARE QUANTITIES MAY VARY BASED ON KIT PURCHASED
ASSEMBLE (A) ADAPTER PLATE WITH BOTH (B)
SUCTION CUPS USING (C) SCREWS AS SHOWN BELOW.
DO NOT OVER-TIGHTEN SCREWS.
C
C
C
C
A
ALTERNATE
ADAPTER PLATE
ATTACH RAM BALL BASE TO (A) ADAPTER PLATE USING (D) SCREWS AND (E) NUTS.
THREAD ALL SCREWS AND NUTS BY HAND FIRST, THEN TIGHTEN USING PHILLIPS
HEAD SCREWDRIVER AND ADJUSTABLE WRENCH.
D
E
D
RMR-INS-189
B
C
D
E
BALL BASE NOT INCLUDED
IN ALL KITS: RAM-B-202U
FOR PROPER SUCTION, MAKE
SURE SURFACE HAS NO CRACKS
OR SCRATCHES, AND HAS BEEN
THOROUGHLY CLEANED.
ALTERNATE
ADAPTER PLATE
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.rammount.com
RMR-INS-189
Loading...