1
R1615
User manual
Wireless
Sport headset
Specially designed for sports enthusiast,
the perfect music partner for sports an
running.
Clear connection record: Press MFB and volume- simultaneously about three
seconds with a voice of “Removal Successful”
Power off: At any status, long press the MFB three seconds and the red light flashes.
Start/Shut the voice control: At standby status after connection. Long press MFB
button about one second until you head a beep. Repeat the action once to cancel the voice
control.
Multi-point function:
1)Connect the Bluetooth headset with cell phone A, and then close Bluetooth function of
cell phone A.
2)Connect the Bluetooth headset with cell phone B.
3)Open Bluetooth function of cell phone again, then the headset will auto connect cell
phone A for manual connection. Now the Bluetooth headset already connected cell phone
connects two cell phones.
7 8 9 10 11 12 13
Read battery volume: Double click Volume- once.
Auto connection: After power on, headset will auto connect the previous connected
cell phone once. You will head a voice of “Set Connected” after successful connection.
Charging rest: After connecting to USB charging cable, red light will keep flashing with
a voice of “Power off”.
Charger and battery
Before using any charger to charge this headset, check whether the specifications of the
charger meet requirements. The recommended output voltage is DC5V+/-0.25V, and the
recommended output current is 100mA to 500mA. An over-high charging voltage may
damage the headset.
Warning:Only use the recommended charger if possible. Other charger may violate the
warranty terms of the equipment and results in danger. If the charging cable is delivered
with the headset, connect the cable to a CCC-certified charger or computer to charge the
headset.
Welcome
Thank you for choosing us. Our Bluetooth headset has a fashionable design, powerful
functions, and high compatibility, providing you with true hands-free convenience when
making calls and listening to music! It is your best choice in office and during traveling and
driving!
Bluetooth Wireless Technology
With the Bluetooth wireless technology, you can connect the headset to relative
compatible communication devices without cables. The Bluetooth wireless connection
allows you to use a cell phone without holding it face to the headset, but the maximum
distance between them shall within 10 meter(about 30 feet). The Bluetooth wireless
connection maybe interfered by obstacles(such as walls) or other electronic devices.
In some areas, maybe there are some limitations to use Bluetooth wireless technology.
Please consult your local authority or service provider for details.
1
Charger and battery
The headset is embedded with non-removable charging battery. Do not attempt to remove
the battery from the headset; otherwise, the headset maybe damaged. If the headset is not
used in a long time, keep it in a dry and well-ventilated place, and charge the headset once
every two months.
1. If the red indicator blinks with low-voltage beep, the headset battery is low. If the headset
continues to work, it may be automatically powered off. At this time, you need to charge the
headset by connecting the cable of the charger to the charging port on the headset.
2. Connect the charger to an AC power socket.
3. The red indicator is on when the headset is being charged. If the charging is not started
yet, disconnect the headset from the power socket, and reconnect the headset again. It
takes about 2 hours to fully charge the headset. After battery charging is completed, the
red indicator is off, and blue indicator is on. At this time, you can disconnect the charger
form the power socket and headset.
Location of controls:
1.USB Charging port
2.Microphone
3.Short Press: Volume Up
4.Multi- Function Button
5.Short press: Volume Down
1
6.Led indicator
4
5
2 3 4 5 6
4. A fully charged battery can provide about 4 hours of talk time, or 100 hours of standby
time. The actual talk time and standby time may vary with different cell phones, settings,
use methods, and environment.
2
6
Fully charge the headset before using. For charging details, please refer to “Charger and
Battery” in this manual. Meanwhile, choose the compatible cell phone or other Bluetooth
devices for pairing. For details about pairing, please refer to ”Basic Operations”
Tips: Keep the headset away from your credit card or other magnetic storage media;
otherwise, the stored information may be lost due to demagnetization.
Product features and functions:
3
* Two ear plugs, freely switch between 3D surround and ordinary stereo sound
* True sport Bluetooth headset, perfect tone
* All-metal audio cavity, aluminum alloy ear-lap, perfect body
* Magnetic adsorption functional earplug, magnetic absorb after picking off, avoiding to
fall off
* 360 Wrapped removable silicone ear hook, ergonomics design, matching the ear contour
* Simple line switch, easy to answer call and play music
* Support Chinese and English, meeting different requirements
Troubleshooting
Problem Description Cause Solution
Power on function is failed
Charging function is failed
Power off function is failed
The headset cannot be
searched or pairing fails
The battery is exhausted
Time of long press MFB
button is too short.
The charging port is not properly
connected.
The headset program is in error
due to an incorrect operation.
The headset does not enter into
the pairing state.
The Bluetooth application of the
cell phone is in error.
Use the charger to fully charger
the battery.
Press the MFB button again.
Reconnect the charging port.
Use the charger to charge and
reset the headset.
Enable the headset to enter into
the pairing state.
Close the cell phone and start again
to pair the cell phone with the headset.
How to connect with the Bluetooth headset (Note: Use iPhone for
example)
1. Under power off status, long press MFB three seconds, the headphones power on
and enter in to a pairing mode with red &blue lights flash
2. Open the Bluetooth software of your phone, searching the headset
3. Find the Bluetooth headset, pairing it to finish connected.
Basic Operations
Power on and pairing: Long press MFB about three seconds for powering on, you
will head a voice of “power on” the red and blue lights flashing alternately, and pairing.
Connect: After successful pairing, you will hear a voice of “Pairing Success”. After
successful connection, you will head a voice of “Set Connected”. For cell phones with
version lower than 2.1, you need to input a paring code “0000”.
After-Sales Service
We provide the “repair, replacement and return warranties”
(“3Rs-Warranty”)service to all products strictly according to national laws and regulations,
and the warranty period is one year.
We do not directly provide the return and replacement services.
If you find any quality problem when using our products, please contact your local
distributors as soon as possible for timely replacement. The after-sales services is not
provided for the following cases:
1. The fragile label is altered or torn up.
2. The product is damaged due to contact with liquid or water.
3. The cover or other components of the product are seriously distorted due to external
forces.
4. The product is damaged due to improper operation or storage.
5. The product is damaged due to an accident or negligence.
6. The product is damaged due to commercial use of the product in abnormal conditions.
7. Any other situations similar to the preceding ones.
Hang up call: During call communication, click MFB button with a voice of “Refuse” to
hang up the call
Reject incoming calls: When a call is coming, long press MFB button for 1 second
to reject the incoming call.
Call transfer: During call communication, long press MFB for one second with a beep
to transfer the call line to cell phone.
Call answer: When a call is incoming, it will auto read incoming phone number. Click
MFB button once to answer the call.
Re-dial the last called number: Under standby status after connection, double
click Volume+once with a beep to re-dial the last called phone number.
Anti-lost warning: If the headset exceeds the allowed distance you will hear a voice
of “Set Disconnected”, and then it will enter into pairing mode with a voice of “Pairing”.
Tips:
1. To extend the services life of the battery, you are advised to charge the headset at least
once a month.
2. Please use the charger provided by company to charge the headset. User of other
low-quality charger may bring about danger.
3. Adjust the volume to an appropriate degree when using the headset.
4. DO NOT wear the headset when sleeping; otherwise, the headset may be damaged or
cause injuries to you.
5. When driving, you are advised to use the company Bluetooth headset to ensure your
driving safety. It is dangerous to directly use cell phones when driving.
6. Keep the headset away from kids. Small components of the headset may cause
suffocation or other injures to kids.
Volume up: Click Volume+ each time, the volume will be increased for one level. You
will head a sound of Max volume when the volume is increased to maximum.
Volume up: Click Volume- each time, the volume will be reduced for one lever. You will
head a sound of “Min Volume” when the volume is reduced to minimum.
Previous: When you are listening to music, long press volume + to previous song.
Next: When you are listening to music, long press volume - to switch to next song.
Three-party calling:
1) when a new call is incoming during call communication (call A), short press MFB once
to end the current call and answer the new call (call B).
2) When a new call is incoming during call communication (call A), long press MFB about
one second to reject Call B and recover call A.
3) When a new call is incoming during call communication (call A), double click MFB once
to keep call A and answer call B. Repeat double click MFB once again to switch Call A/B.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Loading...