Rally Armor 2013+ BRZ-FRS User Manual

IMF 23

10

Long Stainless Steel Screws

1.5SS

To the installer: Please return these instructions to the customer

2013+ SUBARU BRZ/ TOYOTA FR-S MUD FLAP INSTALLATION INSTRUCTIONS

PLEASE REVIEW THESE INSTRUCTIONS IN ITS ENTIRETY BEFORE ATTEMPTING INSTALLATION

For high resolution color images of these instructions, please visit http://www.rallyarmor.com

To protect your Rally Armor mud flaps, care must be taken during parking and reversing. Rally Armor always recommends

professional installation. Check wheel clearances after installation, especially on vehicles outfitted with non-OEM offset wheels and

suspensions. Adjust accordingly. Rally Armor is not responsible for damage or loss of installed mud flaps.

Each mud flap set contains 4 flaps and mounting brackets and hardware (unless otherwise noted).
Recommended tools: Offset/ratcheting Phillips, small & long flat head screwdrivers.

YOUR 2013+ SUBARU BRZ /TOYOTA FRS MOUNTING HARDWARE CONSISTS OF:

Quantity Hardware Item Item ID
2 Front brackets HMF23-FR-BR

2 Rear Brackets HMF23-R-BR
14 Polygon Clips PolCl

4 Short Stainless Steel Screws 1SS
14 Washers SmWash

Cautionary Tip: The hardware is strong and self threading but over-tightening the
mounting clips is not advised.
Installation Tip: To ease installation and avoid damage to existing OEM clips during
removal, a well lit, climate controlled installation environment is recommended.

after installation. Always test and check wheel clearances before
returning vehicle.
To the customer: Retain these instructions after installation. They
may be necessary for installing other optional parts or removal of
this accessory.

HOW TO REMOVE STOCK FASTENERS:

Version 1.0 Release Date 07.17.2012 1