WIRELESS-A/N 26DBM NETWORK MINI PCI ADAP TER WITH ESD
2 x 2 802.11N MIMO mini-PCI Modules
WLM200N5-26 ESD
5GHz Single-Band 802.11n MIMO 2 x 2 miniPCI
Features
Atheros XSPAN family chipset
•
IEEE 802.11n compliant and backward compatible with 802.11a
•
Enhanced sensitivity
•
Optimized isolation path
•
Superior thermal performance
•
Maximum output power 26dBm@802.11a / 28dBm MIMO aggregate
•
•
Built-in ESD Protection with ESD/EMP Immunity Threshold: 15KeV
•
Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard)
•
2 x MMCX connectors allowing for improved mechanical stability and low loss
①
8
Technical Specifications
Chipset Atheros AR9220
Host Interface 32-bit mini-PCI Type IIIA+ (6.55mm longer than I IIA type)
Operating
Voltage
Power
Consumption
Antenna
Connector
Data Rate
Frequency
Range
Modulation
Techniques
RoHS
Compliance
Temperature
Range
Humidity
Dimension 59.6mm x 57.5mm x 7.5mm
802.11a
3.3 VDC
11a Cont. Tx @6M 4.9W
11na Cont. Tx@HT20 MCS0 4.3W
11na Cont. Tx@HT40 MCS0 4.8W
11a Cont. Rx 2.5W
Standby 0.8W
2 x MMCX connector
IEEE 802.11a : 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps
IEEE 802.11n :
IEEE 802.11a/n:
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
Yes
Operating: -20ºC to 70ºC
Storage: -40ºC to 90ºC
Operating:5% to 95% (non-condensing)
Storage: Max.90% (non-condensing)
1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.)
20MHz
2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.)
1Nss: 135Mbps @ 800GI, 150Mbps @ 400GI (Max.)
40MHz
2Nss: 270Mbps @ 800GI, 300Mbps @ 400GI (Max.)
5.725 ~ 5.850 GHz (US & Canada)
5.725 ~ 5.875 GHz (Europe)
WLM200N5-26 ESD MIMO MINIPCI CARD RADIO
DataRate TX Power
6-24Mbps 26dBm 28dBm ±2dB
36Mbps 25dBm 28dBm ±2dB
48Mbps 24dBm 27dBm ±2dB
54Mbps 23dBm 26dBm ±2dB
TX SPECIFICATIONS
TX Power
Tolerance
5GHz
11n
HT 20
802.11a
5GHz
11n
HT 20
DataRate
MCS 0/8 25dBm 28dBm ±2dB MCS 0/8 24dBm 27dBm ±2dB
MCS 1/9 25dBm 28dBm ±2dB MCS 1/9 24dBm 27dBm ±2dB
MCS 2/10 23.5dBm 26.5dBm ±2dB MCS 2/10 22.5dBm 25.5dBm ±2dB
MCS 3/11 23.5dBm 26.5dBm ±2dB MCS 3/11 22.5dBm 25.5dBm ±2dB
MCS 4/12 22.5dBm 25.5dBm ±2dB MCS 4/12 22dBm 25dBm ±2dB
MCS 5/13 22dBm 25dBm ±2dB MCS 5/13 20.5dBm 23.5dBm ±2dB
MCS 6/14 21dBm 24dBm ±2dB MCS 6/14 20.5dBm 23.5dBm ±2dB
MCS 7/15 20dBm 23dBm ±2dB
DataRate
6M -96dBm ±2dB 24M -89dBm ±2dB
9M -96dBm ±2dB 36M -86dBm ±2dB
12M -95dBm ±2dB 48M -82dBm ±2dB
18M -93dBm ±2dB
MCS0 -95dBm ±2dB MCS0 -92dBm ±2dB
MCS1 -93dBm ±2dB MCS1 -90dBm ±2dB
MCS2 -90dBm ±2dB MCS2 -87dBm ±2dB
MCS3 -89dBm ±2dB MCS3 -84dBm ±2dB
MCS4 -85dBm ±2dB MCS4 -81dBm ±2dB
MCS5 -81dBm ±2dB MCS5 -77dBm ±2dB
MCS6 -79dBm ±2dB MCS6 -76dBm ±2dB
MCS7
TX Power
(per chain)
TX Power
(2 chains)
Sensitivity
(2 chains)
-75dBm ±2dB
Tolerance DataRate
RX SPECIFICATIONS
Tolerance DataRate
5GHz
11n
HT 40
MCS 7/15 17dBm 20dBm ±2dB
02.11a
54M -79dBm ±2dB
5GHz
11n
HT 40
MCS7
TX Power
(per chain)
TX Power
(2 chains)
Sensitivity
(2 chains)
-74dBm ±2dB
Tolerance
Tolerance
Cable Dimensions 26cm length
Terminal Material Copper
Attachment Procedure End of ESD Cable tied to Earth Ground
ESD CABLE SPECIFICATION
②
Ordering Information
CODES Connectors t ype Carton Dimension
WLM200N5-26ESD 7B0000 MMCX
c
Module grounding cable included
Configurations are subject to change without notice
d
Please contact Compex sales representatives for other available configurations
For 50pcs (pcs/ctn), 0.40m * 0.22m * 0.085m / 0.006 = 1.5KG
For 250pc (pcs/ctn), 0.45m * 0.45m * 0.24m / 0.006 = 8.1KG
COMPLIANCE INFORMATION
FCC NOTICE
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to pro vid e reasonable
protection against harmful interference in a residential installation. This device generates, uses
and can radiate radio frequency energy and, if not installe d a nd used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this device does cause
harmful interference to radio or tele v ision reception, the user is encourage d to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Connect the computer into an outlet on a circuit different from that to which the receiver is
connected.
• Increase the separation between the computer and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expr essly approved by the grantee of this dev ic e
could void the user's authority to operate the equipment.
FCC Compliance Statement: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This device must accept any interference received, including interference that may cause
undesired operation.
IEEE 802.11a or 802.11n operation of this product in the U.S.A. is firmware-limited to
channels 1 through 24.
RF exposure warning
The equipment complies with FCC RF exposure limits set forth for an uncontrolled
environment.
The equipment must be insta lle d to provide a separation dis tance of at least 20cm from
all persons and must not be co-located or opera tin g in c o nju nc tio n with a ny ot h er
antenna or transmitter.
FCC ID: TK4WLM200N5-26ESD
IC : 7849A-N5-26ESD
IMPORTANT NOTE REGARDING ANTENNA USE
Antenna Use (Point to Multipoint)
2x2 Operation
Chain1 Chain2
Dimensions Drawing
Compex Systems Pte Ltd Compex (Suzhou) Co Ltd
135 Joo Seng Road, PM Industrial Building #08-01,
Singapore 368363
Tel: (65) 6286 2086
Fax: (65) 6280-9947
Email: sales@compex.com.sg
NO.12, ChuangTou Industrial Square,
LouFeng North, Suzhou Industrial Park,
Suzhou, Jiangsu Province, China 215122
Tel: (86)-512-62950050
Fax: (86)-512-62950026
Copyright © 2010 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered tradem arks of COMPEX Inc.
Atheros and other trademarks are properties of their respective owners.
While every effor t is made to ensure the information accur ate, Compex does not accept liability for any errors or mist akes that may arise.
Specification is subject to change without notice. DS V: 1.1.2 GH110311
For more information, visit www.compex.com.sg
Loading...