CLD54D / DNL54D
CLD54D / DNL54D
User Manual
User Manual
www.rainbowcctv.com v1.0
① Video output connector (BNC)
②
④
⑤
p
1Vp-p/75Ω composite video signal output connector.
OSD Control
Controls for OSD - On Screen Display
③ Power LED
This LED turns ON only when the power is supplied properly and the
converter (or the regulator) inside the camera works sell.
Backfocus Mode Button
Eliminate the hassle of backfocusing. No more filters or numerous
adjustments.
Procedure:
1. Push and hold the BACKFOCUS MODE button. The lens iris will
open automatically and the Electronic lris will turn on to prevent
a washed out picture.
2. Adjust the lens for proper focus. If the lens focus range is not
sufficient, adjust the focus screw on the side of the camera.
3. Release the BACKFOCUS MODE button, The lens iris will return
to normal and the Electronic lris will turn off. You're finished!
The camera and lens are now backfocused for proper day and
night operation.
RS-485 Connector
This connector allows for external control of the camera (Pelco D).
⑥ Power input connector (push terminal connector)
Recommended Power Supply (12V DC)
Consum
tion 180 ~ 220mA DC
Use only regulated power supply.
Recommended Power Supply (24V AC)
Consumption 100 ~ 150mA AC.
CAUTIONS
1. Connecto to a Class 2 Power Supply only for both of DC 12V
AC 24V.
2. To prevent fire or shock hazard, the UL listed wire VW_I,
style 1007 should be used for the cable for DC 12V or
Loading...