VCTCXO
Voltage Controlled Temperature Compensated Crystal Oscillator
SMD-version
model
frequency Range
load 10 Kohm // 10pF
output
Frequency
Stability
operating temperature range
input voltage Vcc + 3V DC ± 5%
frequency control voltage (VC) + 1,5V DC ± 1V
input current max. 1,2 mA typ. (20mA max. without load)
frequency adjustment (pullability) voltage control ± 5 ppm min. positive slope
SSB phase noise -120 dBc/Hz at 1 kHz offset
start-up time 3 ms max.
harmonic distortion -5 dBc max.
storage temperature
pin connection
size l/w/h 7,0 x 5,0 x 1,9mm
lead-free since production start
contents of reel 2000 pcs.
order no.
level 0,8Vp-p min.
waveform clipped sine-wave (DC-cut)
vs. temp.range ± 2,0 ppm
vs. input voltage ± 0,2 ppm max. at ± 3V DC ± 5%
vs. load ± 0,2 ppm max. at 10 Kohm ± 10%//10 pF ± 10%
vs. aging ± 1,0 ppm / year max. at +25°C
# 1 : VC
# 2 : GND
# 3 : Output
# 4 : Vcc
KXO-82
12,60 ∼ 20,0 MHz
-30°C ∼ +80°C
-40°C ∼ +85°C
12.97100 ∼ 12.97199
tape specification
suggested soldering pad
GEYER ELECTRONIC Lochhamer Schlag 5 82166 Gräfelfing/München
Tel. 089/546868-0 Fax 089/546868-91 quartz@geyer-electronic.de
24.08.2005