Tech Spec
XFS Dripline With Copper Shield™ Technology
Dripline Series
XFS
SUB SURFACE
Applications
Rain Bird® XFS Dripline with Copper Shield™ for sub-surface drip irrigation is the latest innovation in the Rain Bird Xerigation™ Family. Rain Bird’s patentpending Copper Shield™ Technology protects the emitter from root intrusion, creating a long-lasting, low maintenance sub-surface drip irrigation system for use under turf grass or shrub and groundcover areas. XFS Series Dripline with Copper Shield™ is perfect for small, narrow and tight planting areas, as well as areas with tight curves
or many switchbacks.
It accepts Rain Bird Easy Fit Compression Fittings, XFF Dripline Barbed Insert Fittings and other 17 mm
Features
Simple
•Rain Bird’s patent pending shiny metallic copper-colored XFS dripline with Copper Shield™ Technology protects the emitter from root intrusion with out requiring EPA-approved handling procedures - unlike some manufacturers who use harsh
protect the emitter from root intrusion
•Through the use of a proprietary tubing material, the shiny metallic copper-colored XFS Dripline with
Copper Shield™ is the most exible dripline tubing in the industry making it the easiest sub-surface dripline to design with and install
•It accepts Rain Bird Easy Fit Compression Fittings, XFF Dripline Barbed Insert Fittings and other
reduces in-line pressure loss, allowing longer lateral runs, simplifying design and reducing installation time
spacing and coil lengths provide
sub-surface turf grass or sub-surface shrub and groundcover applications
Reliable
•XFS emitters are protected from root intrusion by Rain Bird’s patent-pending Copper Shield™ Technology resulting in a system that does not require maintenance or replacement of chemicals to prevent root intrusion
•The pressure-compensating emitter design provides a consistent
ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi
Durable
•Dual-layered tubing (copper over black) provides unmatched resistance to chemicals, algae growth and UV damage
•Grit Tolerant: Rain Bird’s proprietary emitter design resists clogging by use
Operating Range
•Pressure: 8.5 to 60 psi (,58 to 4,14 bar)
•Flow rates: 0.42, 0.6 and 0.9 gph (1,6 l/h, 2,3 l/hr and 3,5 l/hr)
•Temperature:
Water: Up to 100°F (37,8° C) Ambient: Up to 125°F (51,7° C)
• Required Filtration: 120 Mesh
•OD: 0.634”
•ID: 0.536”
•Thickness: 0.049”
•12”, 18” (30,5 cm, 45,7 cm) spacing
•Available in 100’ and 500’
(30,5 m and 152,4 m) coils
•Coil Color: Copper, Purple, Copper with Purple Stripe
XFS Dripline Models
XFS-04-12-500 XFS-04-18-500 XFS-06-12-100 XFS-06-12-500 XFS-06-18-100 XFS-06-18-500 XFS-09-12-100 XFS-09-12-500 XFS-09-18-100 XFS-09-18-500
XF Blank tubing also available in brown, purple, and purple stripe colors
XFSP-04-12-500 XFSP-04-18-500 XFSP-06-12-500 XFSP-06-18-500 XFSP-09-12-500 XFSP-09-18-500
XFSPS-04-125 XFSPS-04-185 XFSPS-06-125 XFSPS-06-185 XFSPS-09-125 XFSPS-09-185
How To Specify
XFS - 06 - 12 - 100
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coil Length |
|
|
|
|
|||||||
|
|
|
|
|
|
(100 Feet) |
|||
|
|
|
|
|
Emitter Spacing |
||||
|
|
|
|
(12” Inches) |
|||||
|
Model |
|
Flow Rate |
||||||
|
|
(0.6 GPH) |
XFSP = Purple to indicate models that use non-potable water
XFSPS = Purple stripe to indicate models that use non-potable water
XFS Dripline With Copper Shield™ Technology
Dripline Series
The exible, shiny metallic copper-colored polyethylene tubing shall have factory installed pressure-compensating, inline emitters spaced evenly per listed spacing. The ow rate from each installed inline emitter shall be 0.4, 0.6 or 0.9 gallons per hour when inlet pressure is between 8.5 and 60 psi.
The inline emitter diaphragm shall have a pressure-regulating diaphragm with a spring action allowing it to self-rinse if there is a
allows for easy non-linear installations. The inline emitter shall have copper shield technology installed to protect the emitter from root intrusion. The inline emitter inlet
XFS Dripline Maximum Lateral Length (Feet)
Inlet Pressure |
Maximum Lateral Length (feet) |
|||
psi |
12" Spacing |
|
|
|
|
Nominal Flow (GPH): |
|||
|
0.42 |
0.6 |
0.9 |
|
15 |
352 |
273 |
155 |
|
20 |
399 |
318 |
169 |
|
30 |
447 |
360 |
230 |
|
40 |
488 |
395 |
255 |
|
50 |
505 |
417 |
285 |
|
|
|
|
|
|
60 |
573 |
460 |
290 |
|
|
18" Spacing |
|
|
|
|
Nominal Flow (GPH): |
|
||
|
0.42 |
0.6 |
0.9 |
|
15 |
374 |
314 |
250 |
|
20 |
417 |
353 |
294 |
|
30 |
481 |
413 |
350 |
|
40 |
530 |
465 |
402 |
|
50 |
610 |
528 |
420 |
|
60 |
734 |
596 |
455 |
|
XFS Dripline Maximum Lateral Length (Meters)
Inlet Pressure |
Maximum Lateral Length (meters) |
||
bars |
30.5 cm Spacing |
|
|
|
Nominal Flow (l/h): |
||
|
1.6 |
2.3 |
3.5 |
1.0 |
107.2 |
83.2 |
47.2 |
1.4 |
121.6 |
96.9 |
51.5 |
2.1 |
136.2 |
109.7 |
70.1 |
2.8 |
148.7 |
120.4 |
77.7 |
3.5 |
153.9 |
127.1 |
86.9 |
4.1 |
174.6 |
140.2 |
88.4 |
|
45.7 cm Spacing |
|
|
|
Nominal Flow (l/h): |
||
|
1.6 |
2.3 |
3.5 |
1.0 |
114 |
95.7 |
76.2 |
1.4 |
127.1 |
107.6 |
89.6 |
2.1 |
146.6 |
125.9 |
106.7 |
2.8 |
161.5 |
141.7 |
122.5 |
3.5 |
185.9 |
160.9 |
128.0 |
4.1 |
223.7 |
181.7 |
138.7 |
minimize dirt intrusion.
The XFS Dripline inline tubing shall be manufactured by Rain Bird Corporation, Azusa, California.
LEED Compliant
Contains at least 20% post consumer
for LEED credit 4.2
Rain Bird’s Professional
Customer Satisfaction Policy
XF Series Dripline o ers five (5) years on product workmanship and seven (7) years on environmental stress cracking
Rain Bird Corporation |
Rain Bird Corporation |
Rain Bird International, Inc. |
6991 E. Southpoint Road |
970 West Sierra Madre Avenue |
1000 West Sierra Madre Ave. |
Tucson, AZ 85756 |
Azusa, CA 91702 |
Azusa, CA 91702 |
Phone: (520) 741-6100 |
Phone: (626) 812-3400 |
Phone: (626) 963-9311 |
Fax: (520) 741-6522 |
Fax: (626) 812-3411 |
Fax: (626) 852-7343 |
Rain Bird Technical Services |
|
The Intelligent Use of Water™ |
(800) RAINBIRD (1-800-724-6247) |
|
www.rainbird.com |
(U.S. and Canada) |
|
|
®Registered Trademark of Rain Bird Corporation
©2017 Rain Bird Corporation 01/20
D39978B