RaidSonic iR2770 User Manual
InTANK Series-iR2770
Internal RAID Module
RAIDON InTANK iR2770 has a patented design that allows two 2.5”SATA III drives to be fitted into
one 3.5”drive space! It’s equipped with optional RAID 0 to enhance the speed of transfer compare
to a regular hard drive or switch to RAID 1 for an efficient and securer data backup.
The connector location
is the same with 3.5”HDD
RAIDON iR2770 internal RAID module supports
RAIDON Authorized Distributors, please check this link Click here
SATA III 6.0 Gb/s host interface and SATA 22 pin
power supply; even the connector location exactly
the same with a 3.5”hard drive. Thus it is not
necessary to install any other brackets but just install
the iR2770 inside to existing operating system and
then the system will be upgraded as a RAID storage
to secure data!
mailto:sales1@raidon.com.tw
Optional RAID 0 configuration greatly increases the
transfer speed up which a standard hard drive can’t
reach.
Enhances transfer speed without delays
iR2770
2 x 2.5" HDs
RAID 0
1 x 3.5" HD
Real-time backup for data security
Optional RAID 1 configuration provides drive mirroring or
duplication of each other without data loss. If one of the drives is
failed, simply replace with a new drive (same capacity or greater)
without shutting down the system and the data will rebuild to the
new hard drive automatically. That means the operation system
will keep working without down time as the backup hard drive in
the iR2770 will sustain the system working!
RAIDON Authorized Distributors, please check this link Click here
mailto:sales1@raidon.com.tw
Loading...