RaidSonic IB-RP111 User Manual
Technology GmbH
www.raidsonic.de
ICY BOX
IB-RP111
Protective case for Raspberry Pi® 4
Key features
• Protective enclosure designed specifically for the Raspberry Pi® 4
• Elegant aluminium design paired with excellent workmanship
• Top of enclosure made of 4 mm thick aluminium with cooling fin design for best
heat dissipation
• High-quality aluminium casing for heat dissipation, with opening for external
antenna
• Includes two heat sinks and thermal pads to dissipate heat from the CPU and
IC chipset to the aluminium case
• Cut-outs for all interfaces and connections already available in the side panels
• Allows easy access to power, video, audio, USB, LAN, microSD card
• Prepared for wall mounting
Packing content
1x IB-RP111, 2x heat sinks, 2 x four thermal pads for heat sinks
2x five screws screws, 4x footpad stickers, 1x screw driver
1x quick installation guide
Raspberry Pi® not included)
Protective case for Raspberry Pi® 4
This Raspberry Pi® case is an aluminium case with a small form factor designed for performance and comfort. The case cools down the Raspberry Pi® CPU and IC
chip thanks to its aluminium construction and included heat sinks with thermal pads. The case is acting as a passive heat sink that improves the single-board computer
performances.
Technical data
Model
Article no.
EAN code
Brand
Colour
Material
Raspberry Pi® Version
Cooling
IB-RP111
60655
4250078169932
ICY BOX
Black
Aluminium
4 - Model B
Passive
System requirements Compatible with Raspberry Pi® 4 Model B;
Raspberry PI® board and antenna not included
RaidSonic Technology GmbH • Kurt-Fischer-Straße 50 • 22926 Ahrensburg / Germany
Telephone: +49-(0)4102 – 468 900 (Sales) • Fax: +49-(0)4102 – 468 901 • info@raidsonic.de • www.raidsonic.de
Offers and deliveries are only done under our General Terms and Conditions. Errors and omissions excepted.
Technology GmbH
www.raidsonic.de
ICY BOX IB-RP111
Protective case for Raspberry Pi® 4
Ready to work
Cut-outs for the Raspberry Pi® version 4 (Model B) connections already exist and so the Raspberry Pi® can
be connected and used immediately after installation.
HAT - stands for Hardware Attached on Top
Raspberry Pi® computers are ideally equipped for everyday use, but sometimes you may want to add an
extra hardware controller. Thanks to their GPIO interface, most Pi® computers support an additional HAT
module, but unfortunately not the corresponding cases. For the IB-RP111 this is no problem, because this
case has a HAT function!
“Another brick at the wall”
The mounting holes at the bottom of the case allow to mount the Raspberry Pi® either by fixing it to a VESA®
mount using our VESA® adapter IB-RPA100, or by fixing it directly to the wall using two screws.
Logistical data
Packing unit:
Total weight:
Gross weight (with packing):
Net weight:
RaidSonic Technology GmbH • Kurt-Fischer-Straße 50 • 22926 Ahrensburg / Germany
Telephone: +49-(0)4102 – 468 900 (Sales) • Fax: +49-(0)4102 – 468 901 • info@raidsonic.de • www.raidsonic.de
Offers and deliveries are only done under our General Terms and Conditions. Errors and omissions excepted.
20 pcs./carton
4.7 kg/carton
0.211 kg
0.117 kg
Dimension/carton:
Dimension (with packing):
Dimension of article:
Country of origin:
500x220x220 mm
35x100x200 mm
65x95x35 mm
China
Loading...