RaidSonic IB-RD2253-U31 User Manual
IB-RD2253-U31
External RAID system for 2x 2.5" SATA I/II/III SSD/HDD
Key features
• External RAID system for 2x 2.5" S
• USB 3.1 (Gen 2) host interface up 10 Gbit/s
• Very fast data transfer under RAID 0 mode.
Up to 780 MB/s or more!
• HDD capacity unlimited
• Supported RAID level: RAID 0, 1, SINGLE, LARGE
• Supports SATA III, 6 Gbit/s and UASP
• Silent operation - fanless!
• Plug & Play and Hot Swap
• LED for power, HDD in use, access and error
• Windows 7 or higher, MAC OS X 10.5 or higher
Pretty Performance Package
Compact and space-sa
for two 2.5" HDDs or SSDs with a height of up to 9.5 mm. A
USB 3.1 port provides data transfer rates of up to 10 Gbit/s.
Technical data
Model IB-RD2253-U31
Article No. 22203
EAN code 4250078163121
Brand ICY BO
Article text External RAID system for
Colour Black
Material Aluminium/Plastic
HDD interface 2x 2.5" SATA I/II/III
HDD capacity Unlimited
HDD height Up to 9.5 mm
Hot Swap Yes
Plug & Play Yes
ving. Nevertheless, there is enough space
ATA I/II/III SSD/HDD
X
2x 2.5" SATA I/II/III SSD/HDD
External data interface USB 3.1 (Gen 2) T
RAID Level RAID 0, 1, SINGLE, LARGE
Chipset ASM1352R, USB 3.1 (Gen 2) Dual SA TA Bridge Controller
LED Power, HDD in use, access and error
Transfer rate USB 3.1 up to 10 Gbit/s.
Up to 780 MB/s or more (under RAID 0 mode with
SSDs, depending on hardware)
Power button Yes
Auto rebuilding Yes
Operating system Windows 7 or higher, MAC OS X 10.5 or higher
Power connector External wall power supply, Input: AC 100~240 V, 0.3 A
Output: 5 V / 1.5 A, 7.5 W
ype-B with UASP support
RaidSonic Technology GmbH • Kurt-Fischer-Straße 50 • 22926 Ahrensburg / Germany
elephone: +49-(0)4102 – 468 900 (Sales) • Fax: +49-(0)4102 – 468 901 • www.raidsonic.de
T
Offers and deliveries are only done under our General Terms and Conditions. Errors and omissions excepted.
RaidSonic
STORAGE SOLUTIONS WITHOUT LIMITS
Description for RAID modes of IB-RD2253-U31
LARGE
LARGE concatenates multiple hard driv
in a seamless expansion of virtual volumes beyond the physical limitations of
separately connected hard drives. The data are written from HDD1 to HDD2.
RAID0
RAID 0 is a method of concatenating multiple hard drives into one logical
storage unit. It is the automated process of writing data across multiple drives
simultaneously. Striping is used to increase the performance of disk reads. The
multiple hard drives will write data in "column" effect. If one drive in a striped
set fails, all of the data in the stripe set is lost.
es as a single large volume; resulting
RAID1
RAID 1 is the automated process of writing data to multiple driv
RAID 1 is used to provide redundancy. If one drife fails, the redundant drive will continue
to store the data and provide access to it. The failed drive can then be replaced and
the drive set can be rebuild.
SINGLE
Hard drives are be handled independently as separate logical volumes where files
are stored.
es simultaneously.
LED for Power LEDs
Packing content
1x RD2253-U31, 1x external w
Logistical data
Packing unit: 20 pcs./carton Dimension/Carton: 405x315x350 mm
Total weight: 9.4 kg/carton Dimension (with packing): 195x145x65 mm
Gross weight: 0.435 kg Dimension of article: 132x92x32 mm
Net weight: 0.178 kg Country of Origin: China
all power supply, 1x USB 3.1 (Gen 2) cable (Type-B to Type-A), 1x screwdriver, 1x set of screws, 1x manual
for HDD 1 and HDD 2
in use, access and
error
RAID Mode switch USB 3.0 host
RAID Reset button
RaidSonic Technology GmbH • Kurt-Fischer-Straße 50 • 22926 Ahrensburg / Germany
elephone: +49-(0)4102 – 468 900 (Sales) • Fax: +49-(0)4102 – 468 901 • www.raidsonic.de
T
Offers and deliveries are only done under our General Terms and Conditions. Errors and omissions excepted.
interface
Power connector
On/Off switch
RaidSonic
STORAGE SOLUTIONS WITHOUT LIMITS
Loading...