RaidSonic IB-HUB1429-CPD operation manual

User‘s Manual (English) IB-HUB1429-CPD
4 Port USB 3.1 (Gen 2) hub with Power Delivery
Handbuch (Deutsch) IB-HUB1429-CPD
4 Port USB 3.1 (Gen 2) Hub mit Power Delivery
Sicherheitshinweise IB-HUB1429-CPD
Zur Vermeidung körperlicher Schäden, sowie von Sach-, Geräteschäden und Datenverlust beachten Sie bitte folgende Hinweise:
Warnstufen
GEFAHR
WARNUNG
VORSICHT
ACHTUNG
1. Gefahren durch elektrische Spannung
WARNUNG
• vor Benutzung Betriebsanleitung lesen
• vor Arbeiten am Gerät, Spannungsfreiheit sicherstellen
• Kontaktschutzblenden nicht entfernen
• Kontakt mit Spannungsführenden Komponenten vermeiden.
• Steckkontakte nicht mit spitzen und metallischen Gegenständen berühren
• Verwendung nur in dafür vorgesehenen Umgebungen
• Gerät ausschließlich mit Typenschildkonformen Netzteil betreiben!
• Gerät/Netzteil fern von Feuchtigkeit, Flüssigkeit, Dampf und Staub halten
• Eigenständige Modifikationen sind unzulässig
• Gerät nicht während eines Gewitters anschließen
• Geben Sie Ihr Gerät im Reparaturfall in den Fachhandel
2. Gefahren während Montage (wenn vorgesehen)
VORSICHT
• vor Montage, Betriebsanleitung lesen
• Kontakt mit scharfen Kanten oder spitzen Bauteilen vermeiden
• Bauteile nicht mit Gewalt zusammensetzen
• geeignetes Werkzeug verwenden
• nur gegebenenfalls mitgeliefertes Zubehör und Werkzeug verwenden
3. Gefahren durch Wärmeentwicklung
ACHTUNG
• externe Erwärmung vermeiden und Luftaustausch zulassen
• Lüfter-Auslass und passive Kühlkörper freihalten
• direkte Sonneneinstrahlung auf Gerät/Netzteil vermeiden
• ausreichend Umgebungsluft für Gerät/Netzteil sicherstellen
• keine Gegenstände auf dem Gerät/Netzteil abstellen
4. Gefahren durch Kleinstteile und Verpackung
WARNUNG
• Kleinteile, Zubehör für Kinder unzugänglich verwahren
• Plastiktüten und Verpackung für Kinder unzugänglich verwahren/entsorgen
• Kleinteile und Verpackungen nicht in Kinderhände geben
warnt vor einer unmittelbar gefährlichen Situation, die zum Tod oder zu schweren Verletzungen führen wird.
warnt vor einer möglicherweise gefährlichen Situation, die zum Tod oder zu schweren Verletzungen führen kann.
warnt vor einer möglicherweise gefährlichen Situation, die zu leichten Verletzungen führen kann.
warnt vor einer möglichen Situation, die zu Sach- und Um­weltschäden führen und den Betriebsablauf stören kann.
Kontakt mit elektrisch leitenden Teilen
Lebensgefahr durch Stromschlag
Scharfkantige Bauteile
Finger- oder Handverletzungen bei Zusammenbau (wenn vorgesehen) möglich
Mangelhafte Belüftung des Geräts/Netzteils
Überhitzung und Ausfall des Geräts/Netzteils
Erstickungsgefahr
Lebensgefahr durch Ersticken oder Verschlucken
5. Möglicher Datenverlust
ACHTUNG
• Unbedingt Hinweise in der Bedienungsanleitung/Schnellinstallationsanleitung beachten
• Produkt nur verwenden, wenn Spezifikationen erfüllt sind
• Datensicherung vor Inbetriebnahme durchführen
• Datensicherung vor Anschluss neuer Hardware durchführen
• dem Produkt beiliegendes Zubehör verwenden
6. Reinigung des Gerätes
ACHTUNG
• vor Reinigung, das Gerät außer Betrieb nehmen
• aggressive bzw. scharfe Reinigungs- und Lösungsmittel sind ungeeignet
• nach der Reinigung sicherstellen, dass keine Restfeuchtigkeit vorhanden ist
• Reinigung der Geräte am besten mit trockenem Antistatiktuch durchführen
7. Entsorgung des Gerätes
ACHTUNG
Dieses auf dem Produkt und der Verpackung angebrachte Symbol zeigt an, dass dieses Produkt nicht mit dem Hausmüll entsorgt werden darf. In Über­einstimmung mit der Richtlinie über Elektro- und Elektronik-Altgeräte (WEEE) darf dieses Elektrogerät und ggf. enthaltene Batterien nicht im normalen Hausmüll oder dem Gelben Sack entsorgt werden. Wenn Sie dieses Pro­dukt und ggf. enthaltene Batterien entsorgen möchten, bringen Sie diese bitte zur Verkaufsstelle zurück oder zum Recycling-Sammelpunkt Ihrer Gemeinde.
Bei Fragen kontaktieren Sie gerne unseren Support unter support@raidsonic.de oder besuchen Sie unsere Internetseite www.raidsonic.de.
Datenverlust bei Inbetriebnahme
Unwiederbringlicher Datenverlust möglich
Schädigende Reinigungsmittel
Kratzer, Farbveränderungen, Feuchteschäden oder Kurzschluss am Gerät
Umweltverschmutzung, Wiederverwertung nich t möglich
Mögliche Umweltbelastung durch Bestandteile, Recyclingkreislauf unterbrochen
Safety information IB-HUB1429-CPD
Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.
DANGER
WARNING
CAUTION
IMPORTANT
1. Risk of electrical shock
WARNING
• Read the operating instructions prior to use
• Make sure the device has been de-energised prior to working on it
• Do not remove contact protection panels
• Avoid contact with conducting parts
• Do not bring plug contacts in contact with pointed and metal objects
• Use in intended environments only
• Operate the device using a power unit meeting the specifications of the type plate only!
• Keep the device/power unit away from humidity, liquid, vapour and dust
• Do not modify the device
• Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs
2. Hazards during assembly (if intended)
CAUTION
• Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed components
• Do not force components together
• Use suitable tools
• Use potentially enclosed accessories and tools only
3. Hazards caused by a development of heat
IMPORTANT
• Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
• Avoid direct sunlight on the device/power unit
• Guarantee sufficient ambient air for the device/power unit
• Do not place objects on the device/power unit
4. Hazards caused by very small parts and packaging
WARNING
• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
• Do not hand over small parts and packaging to children
Warns of a directly hazardous situation causing death or serious injury.
Warns of a potentially hazardous situation that may cause death or serious injury.
Warns of a potentially hazardous situation that may cause minor injury.
Warns of a potential situation that may cause material or environmental damage and disrupt operative processes.
Contact with parts conducting electricity
Risk of death by electrical shock
Sharp components
Potential injuries to fingers or hands during assembly (if intended)
Insufficient device/power unit ventilation
Overheating and failure of the device/power unit
Risk of suffocation
Risk of death by suffocation or swallowing
Safety information IB-HUB1429-CPD
5. Potential data loss
IMPORTANT
• Always comply with the information in the operating instructions/quick installation guide
• Exclusively use the product once the specifications have been met
• Back up data prior to commissioning
• Back up data prior to connecting new hardware
• Use accessories enclosed with the product
6. Cleaning the device
IMPORTANT
• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
• Make sure there is no residual moisture after cleaning
• We recommend cleaning devices using a dry, anti-static cloth
7. Disposing of the device
IMPORTANT
This icon on product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Elec­trical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, do­mestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.
If you have any questions, please do not hesitate to contact our support at
support@raidsonic.de or visit our website at www.raidsonic.de.
Data lost during commissioning
Potentially irreversible data loss
Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short circuit in the device
Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle interrupted
Manual IB-HUB1429-CPD
Product overview
Package content
IB-HUB1429-CPD, quick installation guide
Front view
1. 2. 3.
Side view
4.
1. 3x USB 3.1 (Gen 2) Type-C™ interfaces with up to 10 Gbit/s
2. Power LED (white)
3. USB 3.1 (Gen 2) Type-C™ host connection with up to 10 Gbit/s
4. Type-C
PD interface for Power Delivery (no data transfer)
5.5. Connect an available Type-C™ PD power supply
to charge the connected host computer
Important product information
Dear Customer,
Please note the following information about the compatibility of USB Type-C™ hubs and adapters, including this device!
Your host computer must have a USB Type C™ interface.
The IB-HUB1429-CPD also works with computers and notebooks with USB
3.0/2.0/1.1 Type-A interfaces as long as an appropriate adapter is available.
The hub also works on devices with a Thunderbolt™ 3 interface with the transfer rate of up to 10 Gbit/s specified by USB 3.1 (Gen 2).
The Type-C™ interface can be connected with USB 3.0 or 2.0 standard in some computers and notebooks. The hub only supplies the full data transfer rate of up to 10 Gbit/s via USB 3.1 (Gen 2) Type-C™ host interfaces.
The following operating systems are supported: Windows®, macOS
4 Port USB Type-C™ Hub
The IB-HUB1429-CPD is a four port USB 3.1 (Gen 2) hub that can be connected easily to a USB Type-C™ port on a notebook or computer. This enables data transfer rates twice as high as USB 3.0 when using multiple USB devices simultaneously. In addition, on the side is an additional Type-C™ Port with Power Delivery function which can charge the connect­ed notebook by using your existing Type-C™ power supply at once.
Key features
•Interface to host computer: USB 3.1 (Gen 2) Type-C™, up to 10 Gbit/s
•USB Type-C™ Hub with three USB 3.1 (Gen 2) Type-C™ ports
•Additional Type-C™ Power Delivery port to charge your notebook
•Fast, simultaneous usage of multiple USB devices
•Housing made of high-grade aluminium
•Integrated USB cable - 10 cm length
®
Manual IB-HUB1429-CPD
Usage
1. For the first use of the product, connect the USB Type-C™ connector to a USB Type-C™ interface of your computer.
2. Connect your USB Type-C™ devices and a power supply to the appropriate ports.
Note: In order to power and charge your connected laptop, its USB Type-C™ port must support USB Power Delivery or Thunderbolt 3™. Attention! When plugging in and out an adapter to the Type-C™ interface of the IB-HUB1429-CPD, the connected USB devices may get disconnected flashily and then reconnect in a few seconds, so to prevent possible data loss or corruption, avoid (dis-) connecting the PD adapter from AC power while transferring data.
USB
Type-C
USB
Type-C
Handbuch IB-HUB1429-CPD
Produktübersicht
Verpackungsinhalt:
1x IB-HUB1429-CPD, 1x Schnellinstallationsanleitung
Vorderansicht
1. 2. 3.
Seitenansicht
4.
1. 3x USB 3.1 (Gen 2) Type-C™ mit bis zu 10 Gbit/s
2. Betriebs LED (Weiß)
3. USB 3.1 (Gen 2) Type-C™ Hostanschluss mit bis zu 10 Gbit/s
4. Type-C
PD Schnittstelle für Power Delivery (keine Datenübertragung)
5.5. Verbinden Sie ein vorhandenes Type-C™ PD Netzteil,
um den angeschlossenen Rechner zu laden.
Wichtige Produktinformationen
Sehr geehrter Kunde,
nehmen Sie bitte folgende Informationen zur Kompatibilität von USB Type-C™ Hubs und Adaptern, inklusive dieses Gerätes, zur Kenntnis!
Ihr Hostcomputer muss über eine USB Type-C™ Schnittstelle verfügen.
Der IB-HUB1429-CPD arbeitet auch mit und Computern und Notebooks mit USB 3.0/2.0/1.1 Type-A Schnittstellen sofern der passende Adapter vorhanden ist.
Das Gehäuse arbeitet auch an Geräten mit der Thunderbolt™ 3 Schnittstelle mit der von USB 3.1 (Gen 2) angegebenen Transferrate von bis zu 10 Gbit/s.
Die Type-C™ Schnittstelle kann in einigen Computern und Notebooks mit USB 3.0 oder 2.0 angebunden sein. Der Hub liefert nur über USB 3.1 Type-C™ (Gen 2) Hostschnittstellen die volle Datenübertragungsrate von bis zu 10 Gbit/s.
Folgende Betriebssysteme werden grundsätzlich unterstützt: Windows®, macOS
4 Port USB Type-C™ Hub
Der IB-HUB1429-CPD ist ein vierfach USB 3.1 (Gen 2) Hub, der einfach an einen USB Type-C™ Anschluss am Notebook oder Computer angeschlossen werden kann. Mit seinen drei Type-C™ Anschlüssen für Datenübertragung bietet der Hub eine hohe Performance beim Anschluss von mehreren Geräten. An der Seite befindet sich ein zusätzlicher Type-C™ Port mit Power Delivery Funktion, mit dem Sie Ihr Notebook per Type-C™ Netzteil aufladen können. Darüber hinaus erlaubt das integrierte USB Kabel das Anschließen ohne weitere Kabel mit sich herumtragen zu müssen.
®
Hauptmerkmale
•Anschluss zum Hostcomputer: USB 3.1 (Gen 2) Type-C™, bis zu 10 Gbit/s
•USB Type-C™ Hub mit drei USB 3.1 (Gen 2) Type-C™ Anschlüssen
•Zusätzlicher Power Delivery Anschluss um Ihr Notebook aufzuladen
•Schnelle, gleichzeitige Nutzung von mehreren USB Geräten
•Gehäuse aus hochwertigem Aluminium
•Integriertes USB Kabel - 10 cm Länge
Handbuch IB-HUB1429-CPD
Verwendung
1. Für die erste Verwendung des Produktes verbinden Sie den USB Type-C™ Stecker mit einer USB Type-C™ Schnittstelle Ihres Computers.
2. Verbinden Sie Ihre USB Type-C™ Geräte und ein Netzteil mit den entsprechenden Anschlüssen.
Hinweis: Damit Ihr Laptop mit Strom versorgt und auch geladen wird, muss dessen USB Type-C™ Schnittstelle USB Power Delivery oder Thunderbolt 3™ unterstützen.
Achtung! Beim Verbinden bzw. Entfernen eines PD Netzteils über die Type-C™ Schnittstelle der IB-HUB1429-CPD, werden die anderen verwendeten Schnittstellen möglicherweise kurzzeitig getrennt und sofort wieder verbunden. Um Datenverlust während einer Datenübertragung, Streamunterbrechungen oder ähnliches zu vermeiden, verbinden oder entfernen sie die PD Stromversorgung NICHT, während Datenübertragungen stattfinden.
USB
Type-C
USB
Type-C
© Copyright 2019 by RaidSonic Technology GmbH. All Rights Reserved.
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes in the specifications and/or design of the above-mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic Technology GmbH assumes no responsibility for any differences between the product mentioned in this manual and the product you may have. DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the United States and other countries. The terms HDMI® and HDMI® High-Definition Multimedia Interface, and the HDMI® logo are trademarks or registered trademarks of HDMI® LA, Inc. in the United States and other countries. Apple and macOS are registered trademarks of Apple Computer Inc. Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation.
Loading...