Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in
terms of the probability of occurrence as well as the type and severity of the consequences if the
measures to prevent hazards are not complied with.
DANGER
WARNING
CAUTION
IMPORTANT
1. Risk of electrical shock
WARNING
• Read the operating instructions prior to use
• Make sure the device has been de-energised prior to working on it
• Do not remove contact protection panels
• Avoid contact with conducting parts
• Do not bring plug contacts in contact with pointed and metal objects
• Use in intended environments only
• Operate the device using a power unit meeting the specifications of the type plate only!
• Keep the device/power unit away from humidity, liquid, vapour and dust
• Do not modify the device
• Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs
2. Hazards during assembly (if intended)
CAUTION
• Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed components
• Do not force components together
• Use suitable tools
• Use potentially enclosed accessories and tools only
3. Hazards caused by a development of heat
IMPORTANT
• Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
• Avoid direct sunlight on the device/power unit
Warns of a directly hazardous situation causing death or serious injury.
Warns of a potentially hazardous situation that may cause death or
serious injury.
Warns of a potentially hazardous situation that may cause minor injury.
Warns of a potential situation that may cause material or environmental
damage and disrupt operative processes.
Contact with parts conducting electricity
Risk of death by electrical shock
Sharp components
Potential injuries to fingers or hands during assembly (if intended)
Insufficient device/power unit ventilation
Overheating and failure of the device/power unit
Safety information IB-DK2102-C
• Guarantee sufficient ambient air for the device/power unit
• Do not place objects on the device/power unit
4. Hazards caused by very small parts and packaging
WARNING
• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
• Do not hand over small parts and packaging to children
5. Potential data loss
IMPORTANT
• Always comply with the information in the operating instructions/quick installation guide
• Exclusively use the product once the specifications have been met
• Back up data prior to commissioning
• Back up data prior to connecting new hardware
• Use accessories enclosed with the product
6. Cleaning the device
IMPORTANT
• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
• Make sure there is no residual moisture after cleaning
• We recommend cleaning devices using a dry, anti-static cloth
7. Disposing of the device
IMPORTANT
This icon on product and packaging indicates that this product must not be disposed of
as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not
be disposed of in conventional, domestic waste or recycling waste. If you would like
to dispose of this product and potentially included batteries, please return it to the retailer
or your local waste disposal and recycling point.
If you have any questions, please do not hesitate to contact our support at
support@raidsonic.de or visit our website at www.raidsonic.de.
Risk of suffocation
Risk of death by suffocation or swallowing
Data lost during commissioning
Potentially irreversible data loss
Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short circuit in
the device
Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle
interrupted
Sicherheitshinweise IB-DK2102-C
Zur Vermeidung körperlicher Schäden, sowie von Sach-, Geräteschäden und Datenverlust beachten Sie bitte folgende Hinweise:
Warnstufen
Signalwort und Sicherheitszeichen kennzeichnen die Warnstufe und geben einen sofortigen Hinweis
auf Wahrscheinlichkeit, Art und Schwere der Folgen, wenn die Maßnahmen zur Vermeidung der
Gefahr nicht befolgt werden.
GEFAHR
WARNUNG
VORSICHT
ACHTUNG
1. Gefahren durch elektrische Spannung
WARNUNG
• vor Benutzung Betriebsanleitung lesen
• vor Arbeiten am Gerät, Spannungsfreiheit sicherstellen
• Kontaktschutzblenden nicht entfernen
• Kontakt mit Spannungsführenden Komponenten vermeiden.
• Steckkontakte nicht mit spitzen und metallischen Gegenständen berühren
• Verwendung nur in dafür vorgesehenen Umgebungen
• Gerät ausschließlich mit Typenschildkonformen Netzteil betreiben!
• Gerät/Netzteil fern von Feuchtigkeit, Flüssigkeit, Dampf und Staub halten
• Eigenständige Modifikationen sind unzulässig
• Gerät nicht während eines Gewitters anschließen
• Geben Sie Ihr Gerät im Reparaturfall in den Fachhandel
2. Gefahren während Montage (wenn vorgesehen)
VORSICHT
• vor Montage, Betriebsanleitung lesen
• Kontakt mit scharfen Kanten oder spitzen Bauteilen vermeiden
• Bauteile nicht mit Gewalt zusammensetzen
• geeignetes Werkzeug verwenden
• nur gegebenenfalls mitgeliefertes Zubehör und Werkzeug verwenden
3. Gefahren durch Wärmeentwicklung
ACHTUNG
• externe Erwärmung vermeiden und Luftaustausch zulassen
warnt vor einer unmittelbar gefährlichen Situation, die zum Tod oder zu
schweren Verletzungen führen wird.
warnt vor einer möglicherweise gefährlichen Situation, die zum Tod
oder zu schweren Verletzungen führen kann.
warnt vor einer möglicherweise gefährlichen Situation, die zu leichten
Verletzungen führen kann.
warnt vor einer möglichen Situation, die zu Sach- und Umweltschäden
führen und den Betriebsablauf stören kann.
Kontakt mit elektrisch leitenden Teilen
Lebensgefahr durch Stromschlag
Scharfkantige Bauteile
Finger- oder Handverletzungen bei Zusammenbau (wenn vorgesehen)
möglich
Mangelhafte Belüftung des Geräts/Netzteils
Überhitzung und Ausfall des Geräts/Netzteils
Sicherheitshinweise IB-DK2102-C
• Lüfter-Auslass und passive Kühlkörper freihalten
• direkte Sonneneinstrahlung auf Gerät/Netzteil vermeiden
• ausreichend Umgebungsluft für Gerät/Netzteil sicherstellen
• keine Gegenstände auf dem Gerät/Netzteil abstellen
4. Gefahren durch Kleinstteile und Verpackung
WARNUNG
• Kleinteile, Zubehör für Kinder unzugänglich verwahren
• Plastiktüten und Verpackung für Kinder unzugänglich verwahren/entsorgen
• Kleinteile und Verpackungen nicht in Kinderhände geben
5. Möglicher Datenverlust
ACHTUNG
• Unbedingt Hinweise in der Bedienungsanleitung/Schnellinstallationsanleitung beachten
• Produkt nur verwenden, wenn Spezifikationen erfüllt sind
• Datensicherung vor Inbetriebnahme durchführen
• Datensicherung vor Anschluss neuer Hardware durchführen
• dem Produkt beiliegendes Zubehör verwenden
6. Reinigung des Gerätes
ACHTUNG
• vor Reinigung, das Gerät außer Betrieb nehmen
• aggressive bzw. scharfe Reinigungs- und Lösungsmittel sind ungeeignet
• nach der Reinigung sicherstellen, dass keine Restfeuchtigkeit vorhanden ist
• Reinigung der Geräte am besten mit trockenem Antistatiktuch durchführen
7. Entsorgung des Gerätes
ACHTUNG
Dieses auf dem Produkt und der Verpackung angebrachte Symbol zeigt an, dass dieses
Produkt nicht mit dem Hausmüll entsorgt werden darf. In Übereinstimmung mit der Richtlinie über Elektro- und Elektronik-Altgeräte (WEEE) darf dieses Elektrogerät und ggf.
enthaltene Batterien nicht im normalen Hausmüll oder dem Gelben Sack entsorgt
werden. Wenn Sie dieses Produkt und ggf. enthaltene Batterien entsorgen möchten,
bringen Sie diese bitte zur Verkaufsstelle zurück oder zum Recycling-Sammelpunkt Ihrer
Gemeinde.
Bei Fragen kontaktieren Sie gerne unseren Support unter support@raidsonic.de oder besuchen
Sie unsere Internetseite www.raidsonic.de.
Erstickungsgefahr
Lebensgefahr durch Ersticken oder Verschlucken
Datenverlust bei Inbetriebnahme
Unwiederbringlicher Datenverlust möglich
Schädigende Reinigungsmittel
Kratzer, Farbveränderungen, Feuchteschäden oder Kurzschluss am Gerät
Umweltverschmutzung, Wiederverwertung nicht möglich
Mögliche Umweltbelastung durch Bestandteile, Recyclingkreislauf
unterbrochen
Manual IB-DK2102-C
Package content
IB-DK2102-C, quick installation guide
Verpackungsinhalt
IB-DK2102-C, Schnellinstallationsanleitung
Side view / Seitenansicht
1.
Rear view / Rückansicht
1.2.3.4.5.6.7.8.
1. 1x USB 3.0 Type-A data interface/Datenschnittstelle + 1.5 A charging/aufladen
2. 2x USB 3.0 Type-A data interface/Datenschnittstelle + 0.9 A charging/aufladen
5. Mini DisplayPort™ interface/Schnittstelle / up to/bis zu 3840x2160@30Hz
6. HDMI® interface/Schnittstelle / up to/bis zu 3840x2160@30Hz
7. VGA interface/Schnittstelle / up to/bis zu 1920x1200@60 Hz
8. USB Type-C™ only for Power Delivery (PD) 2.0 up to 20 V@3 A / nur für PD 2.0
bis zu 20 V@3 A
1. Headset interface/Schnittstelle
Manual IB-DK2102-C
Starting up / Inbetriebnahme
1. Connect USB Type-C™ cable / USB Type-C™ Kabel anschließen
2. Connect your devices to the appropriate interfaces on the dock /
Schließen Sie Ihre Perepheriegeräte an die entsprechenden Schnittstellen an.
MiniDP
HDMI
Usage of memory card slots / Verwendung der Speicherkartenschächte
SD card (UHS-I)
Insert the SD card into the SD card slot with the bevelled corner in front of it. The golden PIN’s of the
card must be directed downwards.
microSD card (UHS-I)
Insert the microSD card into the microSD card slot with the bevelled corner in front of it. The golden
PIN’s of the card must be directed upwards.
SD Karte (UHS-I)
Schieben Sie die SD Karte mit der abgeschrägten Ecke voraus in den SD-Kartenschacht. Die goldenen Kontaktpunkte zeigen dabei nach unten.
microSD Karte (UHS-I)
Schieben Sie die microSD Karte mit der abgeschrägten Ecke voraus in den microSD Kartenschacht.
Die goldenen Kontaktpunkte zeigen dabei nach oben.
VGA
Manual IB-DK2102-C
Note: In order to power and charge your connected laptop, its USB Type-C ™ port must support
USB Power Delivery 2.0 or Thunderbolt 3™.
Hinweis: Damit Ihr Laptop mit Strom versorgt und auch geladen wird, muss dessen USB Type-C™
Schnittstelle USB Power Delivery 2.0 oder Thunderbolt 3™ unterstützen.
General information
The USB Type-C™ multi DockingStation is designed for extra connectivity demands. With this
DockingStation you can extend a USB Type-C™ host interface and DisplayPort™ Alt Mode supported computer to more displays and USB peripherals, Ethernet network, memory cards, speaker
and microphone through one USB Type-C ™ cable. Adopting Power Delivery 2.0 charging technology, upstream charging function through the Type-C™ interface, you can charge the connected
notebook by using your existing Type-C™ power supply at once.
Features
• Premium aluminium enclosure
• USB Type-C™ with Power Delivery (specification 2.0)
• Charge your notebook with up to 60 W via the USB Type-C™ interface
• Three additional video interfaces:
1x High Speed HDMI® Type-A (up to 3840x2160@30 Hz)
1x Mini DP++ interface (up to 3840x2160@30 Hz)
1x VGA interface up to 1920x1200@60 Hz
• Three USB 3.0 Type-A interfaces, data transfer rate up to 5 Gbit/s
• SD 3.0 (UHS-I) and microSD 3.0 (UHS-I) card reader for data transfer up to 100 MB/s
• Gigabit LAN RJ45 interface with wake-on-LAN function
• 3.5 mm stereo combo jack (headset)
Requirements
• Host notebook with an available USB Type-C™ port (to ensure full dock functionality, the
host USB Type-C™ port must support USB Power Delivery 2.0 and DisplayPort™ Alt Mode
or Thunderbolt™ 3).
Note: The docking station can still connect to a host laptop with a USB Type-C™ port that doesn’t
support Power Delivery (must still support DisplayPort™ Alt Mode). In this configuration, the docking
station will not provide power to your host laptop.
• DisplayPort™, HDMI® or VGA enabled display(s) with cables as needed (for additional
external displays)
• A 4K-capable display is required to achieve 3840x2160@30 Hz resolution
• Any of the following operating systems: Windows® 10, macOS® (no MST support for
macOS® computer)
Manual IB-DK2102-C
USB Type-C™
Not all USB Type-C™ ports support the full functionality of the USB Type-C™ standard. Some ports
might only provide data transfers, and might not support video or Power Delivery over USB. To use
this dock to its full potential, ensure that the host USB Type-C ™ port from your computer supports
DisplayPort™ Alt Mode, as well as USB Power Delivery or Thunderbolt 3™.
Note! The USB Type-C™ port on the DockingStation supports only Power Delivery 2.0.
Install and use the docking station
The dock will automatically install some of the required drivers once it is connected to your laptop’s
USB Type-C™ port. If you receive a prompt to automatically install the driver(s), follow the
on-screen instructions to complete the installation.
Connect your devices to the appropriate ports on the dock. Connect your external display(s) to the
dock’s video port(s).
Note: Video output capabilities are dependent on the video card and hardware specifications of
your connected host laptop. Certain video cards have limited MST support, while some monitors
will also limit the available resolution.
Configure a display device
Please setup your display settings accordingly to your operating system and requirements. For
detailed information, see the corresponding operation manual and description of your operating
system. Your laptop hardware must support dual external displays (e.g.: MST). You can set up
dual displays by using the video output ports (1x Mini DisplayPort™ and 1x HDMI® or 1x Mini
DisplayPort™ and VGA).
Supported video resolutions
The docking station supports 4K HD resolution if the connected HDMI® or DisplayPort™ display
supports it.
Number of displays Video output configuration Maximum resolution/monitor
2 mini DisplayPort™ and HDMI® 1920x1080@60Hz
2 mini DisplayPort™ and VGA 1920x1080p@60 Hz
1 mini DisplayPort™ 3820x2160p@30 Hz
1 HDMI® 3820x2160p@30 Hz
1 VGA 1920x1200p@60 Hz
Manual IB-DK2102-C
Important
1. Mini DisplayPort™ and HDMI® can work simultaneously; Mini DisplayPort™ and VGA can
work simultaneously, but HDMI® and VGA cannot work at the same time.
2. When connecting Mini DisplayPort™ and HDMI® on macOS® based system, the computer
can read only one EDID (Extended Display Interface Data). It is recommended using two
monitors, which have the same highest resolution. If the resolutions are different for these two
monitors, please adjust manually. On Windows® OS the computer can read two different
EDID´s at the same time.
3. When connecting Mini DisplayPort™ and VGA on macOS®, the computer can read only
one EDID. Please connect the Mini DisplayPort™ port before the VGA port; otherwise, there
might be no sound from the device. Please adjust the resolution for both monitors manually.
This issue will not happen on Windows® OS.
4. When using macOS® on the dual monitor mode, the computer can read only one EDID. If
you are using two monitors which do not using the same resolution, there won´t be an image.
Please properly reset the resolution and adjust it manually.
5. When connecting the USB Type-C plug of the IB-DK2102-C to a Chromebook, the mouse
to be connected to the USB 3.0 Type-A port will not work immediately; it will have seconds’
delay. This problem also occurs in other similar Type-C™ adapter (including Apple original 3
in 1 adapter) when connected to Chromebook.
6. When connecting the IB-DK2102-C to Chromebook, the VGA video signal may not appear
on the screen of the VGA monitor under certain resolutions.
7. Attention! When plugging in and out a PD 2.0 adapter to the Type-C™ interface of the
IB-DK2102-C, the connected USB devices will get disconnected flashily and then reconnect
in a few seconds, so to prevent possible data loss or corruption, avoid (dis-)connecting the
PD 2.0 adapter from AC power while transferring data.
Handbuch IB-DK2102-C
Allgemeine Informationen
Die USB Type-C™ Multi DockingStation von ICY BOX in elegantem Design und mit Power Delivery
Technologie, ist für den Anschluss an einen Computer (z.B. Laptop, Notebook, etc.) mit Type-C™
Schnittstelle und DisplayPort™ Alt Mode Unterstützung entwickelt worden um zusätzliche Monitore,
sowie externe Peripherie per USB, LAN, SD Kartenschächten und Audioschnitstelle anschließen zu
können und den Computer gleichzeitig über eine Power Delivery 2.0 Type-C Schnittstelle mit Strom
zu versorgen.
Merkmale
• Hochwertiges und stylisches Aluminiumgehäuse
• USB Type-C™ mit Power Delivery (Spezifikation 2.0)
• Versorgt Ihr Notebook mit bis zu bis zu 60 W über den USB Type-C™ Anschluss
• Drei zusätzliche Videoanschlüsse:
1x High Speed HDMI® Type-A (bis zu 3840x2160@30 Hz)
1x Mini DP++ Anschluss (bis zu 3840x2160@30 Hz)
1x VGA Anschluss bis zu 1920x1200@60 Hz
• Drei USB 3.0 Type-A Anschlüsse mit Datenübertragungsrate bis zu 5 Gbit/s
• SD 3.0 (UHS-I) und microSD 3.0 (UHS-I) Kartenleser für Datenübertragungen bis zu 100 MB/s
• Gigabit LAN RJ45 Schnittstelle mit Wake-on-LAN Funktion
• 3,5 mm Kombi-Headset-Anschluss
Anforderungen
• Host Notebook mit freier USB Type-C™ Schnittstelle (um den vollen Funktionsumfang zu
gewährleisten muss der verwendete USB Type-C™ Anschluss USB Power Delivery 2.0 und
den DisplayPort™ Alt Mode oder Thunderbolt 3™ unterstützen)
Hinweis: Die Dockingstation kann auch an Host Laptops mit USB Type-C™ Schnittstelle OHNE
Power Delivery 2.0 Unterstützung genutzt werden (DisplayPort™ Alt Mode wird weiterhin benötigt).
In diesem Falle kann das Notebook NICHT über die Type-C ™ Schnittstelle mit Strom versorgt werden.
• DisplayPort™, HDMI® oder VGA Monitor(e) mit entsprechenden Verbindungskabeln (wenn
zusätzliche externe Monitore verwendet werden sollen)
• 4K-fähigen Monitor um die volle Auflösung von 3840x2160@30 Hz erreichen zu können
Nicht alle USB Type-C™ Schnittstellen am Markt unterstützen den vollen Funktionsumfang des USB
Type-C™ Standards. Einige Schnittstellen ermöglichen unter Umständen lediglich Datenübertragung, aber eventuell keine Videoübertragung oder Stromversorgung via USB.
Handbuch IB-DK2102-C
Um das volle Potential der IB-DK2102-C ausschöpfen zu können, vergewissern Sie sich, dass
Ihre Host USB Type-C™ Schnittstelle den DisplayPort™ Alt Mode und USB Power Delivery oder
Thunderbolt™ 3 Type-C ™unterstützt.
Hinweis! Die zusätzliche USB Type-C™ Schnittstelle an der Dockingstation unterstützt lediglich
Power Delivery 2.0 und keine Datenübertragung.
Installieren und Verwenden der Dockingstation
Nach dem Anschließen der IB-DK2102-C werden automatisch benötigte Treiber installiert bzw.
aktualisiert. Um die Installation abzuschließen, folgen Sie den Anweisungen, falls während der
automatischen Installation dazu aufgefordert werden sollten.
Schließen Sie Ihre Perepheriegeräte an die entsprechenden Schnittstellen an. Verbinden Sie bei
Bedarf zusätzliche Monitore mit den Videoanschlüssen der IB-DK2102-C.
Hinweis: Die Videoausgabemöglichkeiten hängen von der verwendeten Grafikkarte und weiteren
Hardwarespezifikationen des angeschlossenen Host Computers ab. Bestimmte Grafikkarten verfügen nur über eingeschränkte MST- oder Videounterstützung, während auch einige Monitore nur
geringere Auflösungen unterstützen.
Monitoreinrichtung
Zur optimalen Einstellung Ihrer Anzeigeeinheiten gehen Sie bitte entsprechend Ihres Betriebssystems und Ihrer Bedürfnisse vor. Genauere Informationen entnehmen Sie bitte dem Handbuch und
Beschreibungen ihres Betriebssystems. Die Hardware Ihres Computers muss über eine Unterstützung
für externe Dualanzeigeeinheiten verfügen (z.B.: MST). Sie können zwei externe Anzeigeeinheiten
hinzufügen, indem Sie diese an die Videoschnittstellen der IB-DK2102-C anschließen (1x Mini
DisplayPort™ und 1x HDMI® oder 1x Mini DisplayPort™ und VGA).
Unterstützte Videoauflösungen
Die IB-DK2102-C unterstützt 4K Ultra HD Auflöungen, wenn der angeschlossene HDMI® oder
DisplayPort™ Monitor diese Auflöung ebenfalls unterstützt.
2 mini DisplayPort™ und HDMI® 1920x1080@60Hz
2 mini DisplayPort™ und VGA 1920x1080p@60 Hz
1 mini DisplayPort™ 3820x2160p@30 Hz
1 HDMI® 3820x2160p@30 Hz
1 VGA 1920x1200p@60 Hz
Handbuch IB-DK2102-C
Wichtig:
1. Mini DisplayPort™ und HDMI® oder Mini DisplayPort™ und VGA können gleichzeitig verwendet werden, während HDMI® und VGA nicht gleichzeitg betrieben werden können.
2. Bei der Verwendung mit einem macOS® Rechner und dem Anschluss von Mini DisplayPort™
und HDMI® kann der Computer nur eine EDID-Kennung (Extended Display Interface Data)
lesen. Wir empfehlen zwei Monitore mit der gleichen maximalen Auflösung zu verwenden.
Bei unterschiedlichen Auflösungen zweier Monitore, müssen Sie die Auflösungen manuell
anpassen.
Unter Windows® kann der Computer in der Regel zwei verschiedene EDID-Kennungen
gleichzeitig lesen.
3. Bei der Verwendung mit einem macOS® Rechner und dem Anschluss von Mini DisplayPort™
und VGA kann der Computer nur eine EDID-Kennung (Extended Display Interface Data)
lesen. Schließen Sie den Mini DisplayPort™ vor dem VGA-Anschluss an. Andernfalls erfolgt
möglicherweise keine Tonausgabe am Gerät. Passen Sie die Auflösung für beide Monitore
manuell an. Dieses Problem tritt in der Regel bei Windows® nicht auf.
4. Bei der Verwendung mit einem macOS® Rechner im Doppelmonitor-Modus kann der Rechner nur eine EDID-Kennung lesen. Wenn Sie zwei Monitore verwenden, die nicht die gleiche
Auflösung haben, wird kein Bild ausgegeben. Setzen Sie die Auflösung ordnungsgemäß
zurück und passen sie für beide Monitore manuell an.
5. Wird die IB-DK2102-C über die USB Type-C™ Schnittstelle eines Chromebooks angeschlossen, wird eine per USB Type-A angeschlossene Maus nicht sofort erkannt; die
Verbindung wird mit einigen Sekunden Verzögerung hergestellt. Dies geschieht auch mit
anderen Type-C™ Adaptern (inclusive Appleadaptern) wenn diese an einem Chromebook
angeschlossen werden.
6. Wird die IB-DK2102-C über die USB Type-C™ Schnittstelle eines Chromebooks angeschlossen und ein VGA Monitor verbunden, werden unter Umständen nicht alle verfügbaren Auflösungen unterstützt, so dass in diesem Fall kein Bild verfügbar wäre. Passen Sie die Auflösung
für den Monitor manuell an.
7. Achtung! Beim Verbinden bzw. Entfernen eines PD 2.0 Netzteils über die Type-C™ Schnittstelle der IB-DK2102-C, werden die anderen verwendeten Schnittstellen unter Umständen
kurzzeitig getrennt und sofort wieder verbunden. Um Datenverlust während einer Datenübertragung, Streamunterbrechungen oder ähnliches zu vermeiden, verbinden oder entfernen sie
die PD 2.0 Stromversorgung NICHT, während irgendwelche Datenübertragungen stattfinden.
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes in the specifications and/or design of the above
mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic
Technology GmbH assumes no responsibility for any differences between the product mentioned in this
manual and the product you may have. The terms HDMI® and HDMI® High-Definition Multimedia Interface, and the HDMI® logo are trademarks or registered trademarks of HDMI® LA, Inc. in the United States
and other countries. DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electron-
ics Standards Association (VESA®) in the United States and other countries.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.