RAFI RAFIX 22 QR Technical data

Control components 2 - 83

2

RAFIX

22 QR

RAFIX 22 QR

General data

RAFIX 22QR control component range

• For a mounting hole diameter of 22.3 mm to IEC 60947

• 250V/10A max.

• Water-jet proof IP65

• 2 collar shapes

• The lamps of the pushbuttons can also be replaced from the front

• The contact blocks (silver or gold contacts) snap onto the actuators with a coupling

• Screw, cage clamp, quick connect terminals or RJ12 connector

• 3 NC + 3 NO max.

The specified data apply only if actuators/signal indicators are combined with contact blocks and lamp sockets within the
same product range.

Content

RAFIX 22 QR pushbutton 2 - 88

RAFIX 22 QR pushbutton, flush lens, round collar 2 - 89
RAFIX 22 QR pushbutton, protruding lens, round collar 2 - 90
RAFIX 22 QR pushbutton, protruding front ring, round collar 2 - 91
RAFIX 22 QR pushbutton, flush lens, square collar 2 - 92
RAFIX 22 QR pushbutton, protruding lens, square collar 2 - 93
RAFIX 22 QR pushbutton, protruding front ring, square collar 2 - 94

RAFIX 22 QR selector switch 2 - 96

RAFIX 22 QR selector switch, round collar, short handle 2 - 97
RAFIX 22 QR selector switch, round collar, long handle 2 - 98
RAFIX 22 QR selector switch, square collar, short handle 2 - 99
RAFIX 22 QR selector switch, square collar, long handle 2 - 100

RAFIX 22 QR keylock switch 2 - 102

RAFIX 22 QR keylock switch, round collar 2 - 103
RAFIX 22 QR keylock switch, square collar 2 - 104

RAFIX 22 QR mushroom-headed pushbutton 2 - 106

RAFIX 22 QR mushroom-headed pushbutton 40 mm, round collar 2 - 107
RAFIX 22 QR mushroom-headed pushbutton 40 mm, illuminated, round collar 2 - 107
RAFIX 22 QR mushroom-headed pushbutton 60 mm, round collar 2 - 108
RAFIX 22 QR mushroom-headed pushbutton 40 mm, square collar 2 - 108
RAFIX 22 QR mushroom-headed pushbutton 40 mm, illuminated, square collar 2 - 109
RAFIX 22 QR mushroom-headed pushbutton 60 mm, square collar 2 - 109

2 - 84 Control components

2

RAFIX

22 QR

RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418 2 - 110

RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418 2 - 111
RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, with indication to EN 60947-1 2 - 112
RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, with keylock 2 - 112
RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, illuminated 2 - 113
RAFIX 22 QR emergency stop pushbutton, dupe-proof to EN 418, illuminated 2 - 113

RAFIX 22 QR toggle switch 2 - 114

RAFIX 22 QR, toggle switch, round collar 2 - 115
RAFIX 22 QR, toggle switch, square collar 2 - 115

RAFIX 22 QR twin pushbutton 2 - 116

RAFIX 22 QR twin pushbutton, oval collar 2 - 117
RAFIX 22 QR twin pushbutton, rectangular collar 2 - 117

RAFIX 22 QR potentiometer drive 2 - 118

RAFIX 22 QR potentiometer drive, round collar 2 - 119
RAFIX 22 QR potentiometer drive, square collar 2 - 119

RAFIX 22 QR buzzer 2 - 120

RAFIX 22 QR buzzer, round collar 2 - 121
RAFIX 22 QR buzzer, square collar 2 - 121

RAFIX 22 QR signal indicator 2 - 122

RAFIX 22 QR signal indicator, round collar 2 - 123
RAFIX 22 QR signal indicator, square collar 2 - 123

RAFIX 22 QR contact blocks with silver contacts 2 - 124

RAFIX 22 QR contact block with silver contacts 2 - 125
RAFIX 22 QR contact block assembly, with coupling, without lamp socket, silver contacts 2 - 126
RAFIX 22 QR contact block assembly, with coupling and lamp socket, silver contacts 2 - 127
RAFIX 22 QR contact blocks with gold contacts 2 - 128
RAFIX 22 QR contact block with gold contacts 2 - 129
RAFIX 22 QR contact block assembly, with coupling, without lamp socket, gold contacts 2 - 130
RAFIX 22 QR contact block assembly, with coupling and lamp socket, gold contacts 2 - 131

Contact blocks with coupling, gold contacts, RJ 12 connector, integrated LED 2 - 132

Contact block with coupling, gold contacts, RJ 12 connector, integrated LED 2 - 133

RAFIX 22 QR lamp sockets BA 9s (MBC/MCC), screw terminals and cage clamp terminals 2 - 134

RAFIX 22 QR lamp socket, without coupling 2 - 135
RAFIX 22 QR lamp socket assembly, with coupling 2 - 136

RAFIX 22 QR lamp sockets with integrated LED, screw terminals 2 - 138

RAFIX 22 QR lamp socket with integrated LED, without coupling 2 - 139

RAFIX 22 QR special accessories 2 - 140

Housings for flush pushbuttons 2 - 140
Lenses for flush pushbuttons 2 - 141
Front ring 2 - 142
RAFIX 22 QR plastic front ring with thermoflex protective cap 2 - 142
Label holder 2 - 143
Legend label to clip into label holder 5.07.620.xxx 2 - 143
Coupling 2 - 143
Blanking cap 2 - 144
Ring nut 2 - 144
Lamp tester 2 - 144
Protective cover, suitable for pushbuttons with flush lens 2 - 145
Marking tag 2 - 145
Insulating housing IP65 for RAFIX 22 QR 2 - 146
Emergency stop label plate 2 - 146

RAFIX 22 QR

RAFIX 22 QR

cast-on collar seal

Contact blocks marked with different
colours for ease of identification in
stock and when connecting.

• NC contacts: red

• NO contacts: green

• NC/NO contacts: red/green

• Lamp socket: black

• Silver contacts:
basic housing colour is black

• Gold contacts:
basic housing colour is grey

• The terminals associated with a
contact pair are colour coded on the
connection side and marked with
the respective contact numbers.

The lamps of pushbuttons and signal
lamps can be replaced from the front.
This method saves time and increa­ses safety since it eliminates the
need for accessing the machine/
control station interior and handling
live cables for lamp replacement.
After unscrewing the front ring, the
lens can be removed and the lamp
replaced.

The components feature a removable
locating lug. If installed without loca­ting lug, the ring nut with claw can
be used. Accurate alignment of the
actuator can be achieved behind the
front panel. The cast-on collar seal
can not get lost nor be twisted during
installation and allows single-person
assembly: the actuator is held in the
mounting hole by the cast-on seal
and can then be fixed by screwing
from the rear.

First, snap the lamp socket and
contact blocks into the coupling.
Then snap the assembly on to the
actuator. To release it, the bayonet

must be pressed (prevents inadver-

tent releasing at the same time).

➭

Control Components 2 - 85

2

RAFIX

22 QR

Screw terminals

Cage clamp terminals

Insert the wire. Open the terminal.

Tighten the screw. Insert the wire.

Done. Remove the screwdriver.

Assembly

Versatility of design for customized panels

The RAFIX 22 QR system does not only have a

particularly low profile and is also available in

many different versions. Your design options for

your customized panels are nearly unlimited

thanks to the interchangeable front rings and

lenses. In this way you can achieve an attrac-

tive design while ensuring safe operation of

your equipment at the same time.

RAFIX 22 QR components are available

either with a round or with a square collar.

Terminals

The RAFIX 22 QR contact blocks are available in different
connection styles as required for your application:

• Screw terminals
The terminals are open and the captive screws are
mounted in the terminal recess.

• Quick connect/solder terminals 6.3 x 0.8 mm

• Cage clamp terminals
Simply insert a screwdriver to open the terminal, insert
the cable and remove the screwdriver to close the termi­nal.

• RJ 12-terminal
Just plug in the cable with a RJ 12 connector.

Your

advantage:

This offers your savings in three ways:

• Drastically reduced assembly time thanks to wire
insertion from the rear, i.e. no more bending and lateral
insertion of the wires required.

• You save material: No wire end sleeves are required.

• You save the time previously required for mounting the
wire end sleeves.

Sealed for life against
humidity and dirt

The special seal reliably

prevents moisture, oil and
dust from penetrating to the
contact block. In contrast to

other sealing types which

move up and down the shaft,
this special seal is firmly seated on
the housing (degree of protection
IP 65 to DIN).

2 - 86 Control Components

2

RAFIX

22 QR

RAFIX 22 QR

The RAFIX 22 QR control component
range meets all the technical require­ments and current standards for
control units. The system is of modu­lar design. Actuators, contact blocks
and lamp sockets can be combined
freely. This means that you may

implement modifications
of design or configuration
even at the last minute.
An additional positive
effect is the reduction of
stockholding costs.

• Fix the actuator in the front panel
with the ring nut.

• Snap the individual elements (a ma­ximum three contact blocks or two
contact blocks together with a lamp
socket) in the coupling. You can in­stall them on any assembling axis.

• Insert the lamp or LED into the lamp
socket.

• Snap the coupling with
the contact blocks on to
the actuator.

• Connect the cables.

• Disassembly is performed in
reverse order. To remove the
coupling from the actuator, the
latch lever must be pressed
(by hand or with a screwdriver).

Panel cut-out according to
IEC 60947-5-1

All actuators are provided with a
locating lug which may be removed
using a screwdriver for installation
into mounting holes if required.

With a grid spacing of 30 mm
horizontally and 50 mm vertically,
the collars of the square actuators
touch each other. We revommend to
use the same grid spacing also for
the round collar shapes (IEC 947).

Approvals ● = approved, ●● = pending

Sequence of assembly/disassembly at screw, cage clamp
and quick connect terminals

1.20 124.– – –

●● ●● ● ● ●●

1.20 125.– – –

●● ●● ● ● ●●

1.30 243.– – –

●● ●

1.71 213.– – –

●● ● ● ●●

1.71 214.– – –

●● ● ● ●●

Part no.

BG

zert.

VDE

0660 10/15

ULc GL

Assembly Disassembly

Dimensioned drawing

2

RAFIX

22 QR

Control Components 2 - 87

RAFIX 22 QR

30.00

50.00

Stock items are marked

by bold printed order numbers.

2 - 88 Control components

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR pushbutton

Panel cut-out to IEC 60947-5-1with contact blockPict.: transparent green

Technical data

General information

Form of lens see order block
Colour of lens see order block
Colout of front ring see order block
Form of collar see order block

Dimensions

Length of collar see order block
Width of collar see order block
Overall height see order block
Mounting depth with
contact block without cable 56.4 mm
Mounting hole 22.3 mm
Key grid 50 x 30 mm
Diameter of collar see order block

Mechanical design

Mounting ring nut
Contact function see order block
Illuminability see order block

Mechanical characteristics

Operating travel 4 mm

Operating force max. approx. 5 N for

1 switching element

Robustness min. 100 N

Other specifications

Operating life
(operations) 1 million momentary/

0.5 million latching
Degree of protection
from front side IP65
Ambient temp. operating
min. -25 °C
Ambient temp. operating
max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Resistance to constant
environment according to

IEC 600 68-2-3 and 2-30
Resistance at variable
environment according to

IEC 600 68-2-14 and 2-33

Description Photo Order no.

Page

Accessories RAFIX 22 QR pushbutton

RAFIX 22 QR contact block with silver contacts, with cou­pling, without lamp socket, screw terminals, 1 NO

1.20.124.002/0000 2 - 126

RAFIX 22 QR contact block with silver contacts, with cou­pling and lamp socket, screw terminals, 1 NC + 1 NO

1.20.124.027/0000 2 - 127

RAFIX 22 QR contact block with gold contacts, with cou­pling and lamp socket, screw terminals, 1 NO

1.20.124.122/0000 2 - 131

RAFIX 22 QR contact block with silver contacts, with cou­pling and lamp socket, cage clamp terminals, 1 NO, 1 NC

1.20.125.025/0000 2 - 127

Contact block with RJ 12 connector, 2 NO, white LED 1.20.128.015/0000 2 - 133

Filament lamp, BA 9s base (MBC/MCC), 24 - 30 V 1.90.060.133/0000 5 - 8

LED BA 9s (MBC/MCC) superbright, white, 24 V 1.90.690.345/0000 5 - 19

Stock items are marked

by bold printed order numbers.

Control components 2 - 89

2

RAFIX

22 QR

RAFIX 22 QR

Description Photo Order no.

Page

Accessories RAFIX 22 QR pushbutton

Fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 23

Label holder, round collar, with adhesive tape and release
liner on back

5.07.620.010/0000 2 - 143

For other contact blocks, refer to the chapter „Contact blocks“; for additional accessories, refer to „RAFIX 22 QR special accessories“.

RAFIX 22 QR pushbutton, flush lens, round collar

Pict.: transparent green Panel cut-out to IEC 60947-5-1

Colour of lensIlluminability Order no. momentary

Plastic front ring Metallized front ring

Order no. latching

Plastic front ring Metallized front ring

yes transparent white 1.30.240.001/10xx 1.30.240.021/1000 1.30.240.011/10xx 1.30.240.031/1000

yes transparent red 1.30.240.001/13xx 1.30.240.021/1300 1.30.240.011/13xx 1.30.240.031/1300

yes transparent yellow 1.30.240.001/14xx 1.30.240.021/1400 1.30.240.011/14xx 1.30.240.031/1400

yes transparent green 1.30.240.001/15xx 1.30.240.021/1500 1.30.240.011/15xx 1.30.240.031/1500

yes transparent blue 1.30.240.001/16xx 1.30.240.021/1600 1.30.240.011/16xx 1.30.240.031/1600

no opaque black 1.30.240.101/01xx 1.30.240.121/0100 1.30.240.111/01xx 1.30.240.131/0100

no opaque white 1.30.240.101/02xx 1.30.240.121/0200 1.30.240.111/02xx 1.30.240.131/0200

no opaque red 1.30.240.101/03xx 1.30.240.121/0300 1.30.240.111/03xx 1.30.240.131/0300

no opaque yellow 1.30.240.101/04xx 1.30.240.121/0400 1.30.240.111/04xx 1.30.240.131/0400

no opaque green 1.30.240.101/05xx 1.30.240.121/0500 1.30.240.111/05xx 1.30.240.131/0500

no opaque blue 1.30.240.101/06xx 1.30.240.121/0600 1.30.240.111/06xx 1.30.240.131/0600

no opaque slate-grey 1.30.240.101/07xx 1.30.240.121/0700 1.30.240.111/07xx 1.30.240.131/0700

Technical data see page 2 - 88

Accessories:

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08
Pushbuttons with plastic front ring and white lens are also available with the following front ring colours: red = 03, yellow = 04, green =

05, blue = 06. Other colour combinations on request.
Order numbers 1.30.240.001/--08, 1.30.240.011/--08 and 1.30.240.101/--08 (with silver grey plastic front ring) are stock items.

Front ring, plastic with thermoflex protective cap, black: 5.05.004.914/0100
Front ring, plastic with protective cap, slate grey: 5.05.004.914/0700
Front ring, plastic with thermoflex protective cap, silver grey: 5.05.004.914/0800
Schutzklappe, selbstschließend: 5.05.511.194/0000
Protective cover, latching: 5.05.511.195/0000

1...6mm

29.80

M22x1.5

22.90

21.80

9.40

Stock items are marked

by bold printed order numbers.

2 - 90 Control components

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR pushbutton, protruding lens, round collar

Pict.: transparent red Panel cut-out to IEC 60947-5-1

Colour of lensIlluminability Order no. momentary

Plastic front ring Metallized front ring

Order no. latching

Plastic front ring Metallized front ring

yes transparent white 1.30.240.201/10xx 1.30.240.221/1000 1.30.240.211/10xx 1.30.240.231/1000

yes transparent red 1.30.240.201/13xx 1.30.240.221/1300 1.30.240.211/13xx 1.30.240.231/1300

yes transparent yellow 1.30.240.201/14xx 1.30.240.221/1400 1.30.240.211/14xx 1.30.240.231/1400

yes transparent green 1.30.240.201/15xx 1.30.240.221/1500 1.30.240.211/15xx 1.30.240.231/1500

yes transparent blue 1.30.240.201/16xx 1.30.240.221/1600 1.30.240.211/16xx 1.30.240.231/1600

no opaque black 1.30.240.301/01xx 1.30.240.321/0100 1.30.240.311/01xx 1.30.240.331/0100

no opaque white 1.30.240.301/02xx 1.30.240.321/0200 1.30.240.311/02xx 1.30.240.331/0200

no opaque red 1.30.240.301/03xx 1.30.240.321/0300 1.30.240.311/03xx 1.30.240.331/0300

no opaque yellow 1.30.240.301/04xx 1.30.240.321/0400 1.30.240.311/04xx 1.30.240.331/0400

no opaque green 1.30.240.301/05xx 1.30.240.321/0500 1.30.240.311/05xx 1.30.240.331/0500

no opaque blue 1.30.240.301/06xx 1.30.240.321/0600 1.30.240.311/06xx 1.30.240.331/0600

no opaque slate-grey 1.30.240.301/07xx 1.30.240.321/0700 1.30.240.311/07xx 1.30.240.331/0700

Technical data see page 2 - 88

Accessories:

Legend insert without legend: 5.70.802.000/2000

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08

Pushbuttons with plastic front ring and white lens are also available with the following front ring colours: red = 03, yellow = 04, green =
05, blue = 06. Other colour combinations on request.

Order numbers 1.30.240.201/--08 and 1.30.240.211/--08 (with silver grey plastic front ring) are stock items.

1...6mm

29.80

M22x1.5

22.90

22.00

12.45

Stock items are marked

by bold printed order numbers.

Control components 2 - 91

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR pushbutton, protruding front ring, round collar

Pict.: transparent red Panel cut-out to IEC 60947-5-1

Colour of lensIlluminability Order no. momentary

Plastic front ring Metallized front ring

Order no. latching

Plastic front ring Metallized front ring

yes transparent white 1.30.240.401/10xx 1.30.240.421/1000 - -

yes transparent red 1.30.240.401/13xx 1.30.240.421/1300 - -

yes transparent yellow 1.30.240.401/14xx 1.30.240.421/1400 - -

yes transparent green 1.30.240.401/15xx 1.30.240.421/1500 - -

yes transparent blue 1.30.240.401/16xx 1.30.240.421/1600 - -

no opaque black 1.30.240.501/01xx 1.30.240.521/0100 - -

no opaque white 1.30.240.501/02xx 1.30.240.521/0200 - -

no opaque red 1.30.240.501/03xx 1.30.240.521/0300 - -

no opaque yellow 1.30.240.501/04xx 1.30.240.521/0400 - -

no opaque green 1.30.240.501/05xx 1.30.240.521/0500 - -

no opaque blue 1.30.240.501/06xx 1.30.240.521/0600 - -

no opaque slate-grey 1.30.240.501/07xx 1.30.240.521/0700 - -

Technical data see page 2 - 88

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08

The protruding collar offers protection against inadvertent operation and thereby fulfils the safety requirements of various machinery
manufacturers, particularly from the printing industry.

1...6mm

29.80

M22x1.5

22.90

24.30

12.60

Stock items are marked

by bold printed order numbers.

2 - 92 Control components

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR pushbutton, flush lens, square collar

Pict.: transparent red Panel cut-out to IEC 60947-5-1

Colour of lensIlluminability Order no. momentary

Plastic front ring Metallized front ring

Order no. latching

Plastic front ring Metallized front ring

yes transparent white 1.30.240.051/10xx 1.30.240.071/1000 1.30.240.061/10xx 1.30.240.081/1000

yes transparent red 1.30.240.051/13xx 1.30.240.071/1300 1.30.240.061/13xx 1.30.240.081/1300

yes transparent yellow 1.30.240.051/14xx 1.30.240.071/1400 1.30.240.061/14xx 1.30.240.081/1400

yes transparent green 1.30.240.051/15xx 1.30.240.071/1500 1.30.240.061/15xx 1.30.240.081/1500

yes transparent blue 1.30.240.051/16xx 1.30.240.071/1600 1.30.240.061/16xx 1.30.240.081/1600

no opaque black 1.30.240.151/01xx 1.30.240.171/0100 1.30.240.161/01xx 1.30.240.181/0100

no opaque white 1.30.240.151/02xx 1.30.240.171/0200 1.30.240.161/02xx 1.30.240.181/0200

no opaque red 1.30.240.151/03xx 1.30.240.171/0300 1.30.240.161/03xx 1.30.240.181/0300

no opaque yellow 1.30.240.151/04xx 1.30.240.171/0400 1.30.240.161/04xx 1.30.240.181/0400

no opaque green 1.30.240.151/05xx 1.30.240.171/0500 1.30.240.161/05xx 1.30.240.181/0500

no opaque blue 1.30.240.151/06xx 1.30.240.171/0600 1.30.240.161/06xx 1.30.240.181/0600

no opaque slate-grey 1.30.240.151/07xx 1.30.240.171/0700 1.30.240.161/07xx 1.30.240.181/0700

Technical data see page 2 - 88

Accessories:

Front ring, plastic with thermoflex protective cap, black: 5.05.004.914/0100
Front ring, plastic with protective cap, slate grey: 5.05.004.914/0700

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08

Pushbuttons with plastic front ring and white lens are also available with the following front ring colours: red = 03, yellow = 04, green =
05, blue = 06. Other colour combinations on request.

Order numbers 1.30.240.051/--08, 1.30.240.061/--08 and 1.30.240.151/--08 (with silver grey plastic front ring) are stock items.

Front ring, plastic with thermoflex protective cap, silver grey: 5.05.004.914/0800

1...6mm

29.80

M22x1.5

22.90

21.80

9.40

Stock items are marked

by bold printed order numbers.

Control components 2 - 93

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR pushbutton, protruding lens, square collar

Pict.: transparent red Panel cut-out to IEC 60947-5-1

Colour of lensIlluminability Order no. momentary

Plastic front ring Metallized front ring

Order no. latching

Plastic front ring Metallized front ring

yes transparent white 1.30.240.251/10xx 1.30.240.271/1000 1.30.240.261/10xx 1.30.240.281/1000

yes transparent red 1.30.240.251/13xx 1.30.240.271/1300 1.30.240.261/13xx 1.30.240.281/1300

yes transparent yellow 1.30.240.251/14xx 1.30.240.271/1400 1.30.240.261/14xx 1.30.240.281/1400

yes transparent green 1.30.240.251/15xx 1.30.240.271/1500 1.30.240.261/15xx 1.30.240.281/1500

yes transparent blue 1.30.240.251/16xx 1.30.240.271/1600 1.30.240.261/16xx 1.30.240.281/1600

no opaque black 1.30.240.351/01xx 1.30.240.371/0100 1.30.240.361/01xx 1.30.240.381/0100

no opaque white 1.30.240.351/02xx 1.30.240.371/0200 1.30.240.361/02xx 1.30.240.381/0200

no opaque red 1.30.240.351/03xx 1.30.240.371/0300 1.30.240.361/03xx 1.30.240.381/0300

no opaque yellow 1.30.240.351/04xx 1.30.240.371/0400 1.30.240.361/04xx 1.30.240.381/0400

no opaque green 1.30.240.351/05xx 1.30.240.371/0500 1.30.240.361/05xx 1.30.240.381/0500

no opaque blue 1.30.240.351/06xx 1.30.240.371/0600 1.30.240.361/06xx 1.30.240.381/0600

no opaque slate-grey 1.30.240.351/07xx 1.30.240.371/0700 1.30.240.361/07xx 1.30.240.381/0700

Technical data see page 2 - 88

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08

Pushbuttons with plastic front ring and white lens are also available with the following front ring colours: red = 03, yellow = 04, green =
05, blue = 06. Other colour combinations on request.

Order numbers 1.30.240.251/--08 and 1.30.240.261/--08 (with silver grey plastic front ring) are stock items.

1...6mm

29.80

M22x1.5

22.90

22.00

12.45

Stock items are marked

by bold printed order numbers.

2 - 94 Control components

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR pushbutton, protruding front ring, square collar

Pict.: transparent green Panel cut-out to IEC 60947-5-1

Colour of lensIlluminability Order no. momentary

Plastic front ring Metallized front ring

Order no. latching

Plastic front ring Metallized front ring

yes transparent white 1.30.240.451/10xx 1.30.240.471/1000 - -

yes transparent red 1.30.240.451/13xx 1.30.240.471/1300 - -

yes transparent yellow 1.30.240.451/14xx 1.30.240.471/1400 - -

yes transparent green 1.30.240.451/15xx 1.30.240.471/1500 - -

yes transparent blue 1.30.240.451/16xx 1.30.240.471/1600 - -

no opaque black 1.30.240.551/01xx 1.30.240.571/0100 - -

no opaque white 1.30.240.551/02xx 1.30.240.571/0200 - -

no opaque red 1.30.240.551/03xx 1.30.240.571/0300 - -

no opaque yellow 1.30.240.551/04xx 1.30.240.571/0400 - -

no opaque green 1.30.240.551/05xx 1.30.240.571/0500 - -

no opaque blue 1.30.240.551/06xx 1.30.240.571/0600 - -

no opaque slate-grey 1.30.240.551/07xx 1.30.240.571/0700 - -

Technical data see page 2 - 88

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08

The protruding collar offers protection against inadvertent operation and thereby fulfils the safety requirements of various machinery
manufacturers, particularly in the industry.

1...6mm

29.80

M22x1.5

22.90

24.30

12.60

Stock items are marked

by bold printed order numbers.

2 - 96 Control components

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR selector switch

Panel cut-out to IEC 60947-5-1Front ring, metallized, illuminatedPict.: Front ring, black, non-illuminated

General data

The illuminated selector switches are provided with translucent handle markings. These are opaque on the non-illumi­nated versions.

Technical data

General information

Actuator handle
Marking of handle white
Colout of front ring see order block
Form of collar see order block

Dimensions

Length of collar see order block
Width of collar see order block
Overall height 22.2 mm
Mounting depth with
contact block without cable 56.4 mm
Mounting hole 22.3 mm
Key grid 50 x 30 mm
Diameter of collar see order block

Mechanical design

Mounting ring nut
Contact function see order block
Illuminability see order block
Rotating angle see order block

Mechanical characteristics

Operating force max. approx. 5 N for

1 switching element

Torque max. 2 Nm

Electrical characteristics

Protection class II

Other specifications

Operating life 0.5 million
Degree of protection
from front side IP65
Ambient temp. operating
min. -27 °C
Ambient temp. operating
max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Resistance to constant
environment according to

IEC 600 68-2-3 and 2-30
Resistance at variable
environment according to

IEC 600 68-2-14 and 2-33

Description Photo Order no. Page

Accessories RAFIX 22 QR selector switch

RAFIX 22 QR contact block with silver contacts, with cou­pling, without lamp socket, screw terminals, 1 NC + 1 NO

1.20.124.017/0000 2 - 126

RAFIX 22 QR contact block with silver contacts, with cou­pling and lamp socket, screw terminals, 1 NC + 1 NO

1.20.124.027/0000 2 - 127

RAFIX 22 QR contact block with gold contacts, with coupling
and lamp socket, screw terminals, 1 NC + 1 NO, 1 NC + 1 NO

1.20.124.128/0000 2 - 131

Contact block with coupling, gold contacts, RJ 12 connec­tor, 1 NC + 1 NO, white LED

1.20.128.013/0000 2 - 133

RAFIX 22 QR

Stock items are marked

by bold printed order numbers.

Control components 2 - 97

2

RAFIX

22 QR

Description Photo Order no.

Page

Accessories RAFIX 22 QR selector switch

Label holder, round collar, with adhesive tape and release
liner on back

5.07.620.010/0000 2 - 143

For other contact blocks, refer to the chapter „Contact blocks“; for additional accessories, refer to „RAFIX 22 QR special accessories“.

RAFIX 22 QR selector switch, round collar, short handle

Pict.: Front ring, silver grey, non-illuminated Panel cut-out to IEC 60947-5-1

Illuminability Rotating

angle

Order no.

Plastic front ring Metal front ring

Contact function Rotating angle

yes momentary 1 x 40° 1Ö + 1S 1.30.242.001/22xx 1.30.242.002/2200

yes momentary 2 x 40° 1Ö + 1S 1.30.242.026/22xx 1.30.242.027/2200

yes latching 1 x 90°, form L 1Ö + 1S 1.30.242.101/22xx 1.30.242.102/2200

yes latching 1 x 90°, form V 1Ö + 1S 1.30.242.201/22xx 1.30.242.202/2200

yes latching 2 x 60° 1Ö + 1S 1.30.242.301/22xx 1.30.242.302/2200

yes latching 2 x 90° 1Ö + 1S 1.30.242.126/22xx 1.30.242.127/2200

no momentary 1 x 40° 1Ö + 1S 1.30.242.501/02xx 1.30.242.502/0200

no momentary 2 x 40° 1Ö + 1S 1.30.242.526/02xx 1.30.242.527/0200

no latching 1 x 90°, form L 1Ö + 1S 1.30.242.601/02xx 1.30.242.602/0200

no latching 1 x 90°, form V 1Ö + 1S 1.30.242.701/02xx 1.30.242.702/0200

no latching 2 x 60° 1Ö + 1S 1.30.242.801/02xx 1.30.242.802/0200

no latching 2 x 90° 1Ö + 1S 1.30.242.626/02xx 1.30.242.627/0200

Technical data see page 2 - 96

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08; other colours on request.

Included: Ring nut with claw.

Other contact versions on request

On keylock switches with 3 switching positions (e.g. 2 x 90 degrees), either the left-hand or right-hand contact block is activated, depen­ding on the sense of rotation. A third contact block arranged in the centre would be actuated with either sense of rotation.

The following selector switches with silver grey plastic front ring are stock items:
Illuminated: 1.30.252.001/2208, 1.30.252.026/2208, 1.30.252.101/2208, 1.30.252.201/2208, 1.30.252.301/2208
Non-illuminated: 1.30.252.501/0208, 1.30.252.526/0208, 1.30.252.601/0208, 1.30.252.701/0208, 1.30.252.801/0208

Stock items are marked

by bold printed order numbers.

2 - 98 Control components

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR selector switch, round collar, long handle

Pict.: Front ring, metallized, illuminated Panel cut-out to IEC 60947-5-1

Illuminability Rotating

angle

Order no.

Plastic front ring Metal front ring

Contact function Rotating angle

yes momentary 1 x 40° 1Ö + 1S 1.30.242.011/22xx 1.30.242.012/2200

yes momentary 2 x 40° 1Ö + 1S 1.30.242.036/22xx 1.30.242.037/2200

yes latching 1 x 90°, form L 1Ö + 1S 1.30.242.111/22xx 1.30.242.112/2200

yes latching 1 x 90°, form V 1Ö + 1S 1.30.242.211/22xx 1.30.242.212/2200

yes latching 2 x 60° 1Ö + 1S 1.30.242.311/22xx 1.30.242.312/2200

yes latching 2 x 90° 1Ö + 1S 1.30.242.136/22xx 1.30.242.137/2200

no momentary 1 x 40° 1Ö + 1S 1.30.242.511/02xx 1.30.242.512/0200

no momentary 2 x 40° 1Ö + 1S 1.30.242.536/02xx 1.30.242.537/0200

no latching 1 x 90°, form L 1Ö + 1S 1.30.242.611/02xx 1.30.242.612/0200

no latching 1 x 90°, form V 1Ö + 1S 1.30.242.711/02xx 1.30.242.712/0200

no latching 2 x 60° 1Ö + 1S 1.30.242.811/02xx 1.30.242.812/0200

no latching 2 x 90° 1Ö + 1S 1.30.242.636/02xx 1.30.242.637/0200

Technical data see page 2 - 96

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08; other colours on request.

Included: Ring nut with claw.

At selector switches with 3 switching positions (e.g. 2 x 90 degrees), either the left-hand or right-hand contact block is activated, depen­ding on the sense of rotation. A third contact block arranged in the centre would be actuated with either sense of rotation.
Other contact versions on request.

1...6

29.80

M 22x1.5

9.10

22.90

22.20

RAFIX 22 QR

Stock items are marked

by bold printed order numbers.

Control components 2 - 99

2

RAFIX

22 QR

RAFIX 22 QR selector switch, square collar, short handle

Pict.: Front ring, red, non-illuminated Panel cut-out to IEC 60947-5-1

Illuminability Rotating

angle

Order no.

Plastic front ring Metal front ring

Contact function Rotating angle

yes momentary 1 x 40° 1Ö + 1S 1.30.242.051/22xx 1.30.242.052/2200

yes momentary 2 x 40° 1Ö + 1S 1.30.242.076/22xx 1.30.242.077/2200

yes latching 1 x 90°, form L 1Ö + 1S 1.30.242.151/22xx 1.30.242.152/2200

yes latching 1 x 90°, form V 1Ö + 1S 1.30.242.251/22xx 1.30.242.252/2200

yes latching 2 x 60° 1Ö + 1S 1.30.242.351/22xx 1.30.242.352/2200

yes latching 2 x 90° 1Ö + 1S 1.30.242.176/22xx 1.30.242.177/2200

no momentary 1 x 40° 1Ö + 1S 1.30.242.551/02xx 1.30.242.552/0200

no momentary 2 x 40° 1Ö + 1S 1.30.242.576/02xx 1.30.242.577/0200

no latching 1 x 90°, form L 1Ö + 1S 1.30.242.651/02xx 1.30.242.652/0200

no latching 1 x 90°, form V 1Ö + 1S 1.30.242.751/02xx 1.30.242.752/0200

no latching 2 x 60° 1Ö + 1S 1.30.242.851/02xx 1.30.242.852/0200

no latching 2 x 90° 1Ö + 1S 1.30.242.676/02xx 1.30.242.677/0200

Technical data see page 2 - 96

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08; other colours on request.

Included: Ring nut with claw.

At selector switches with 3 switching positions (e.g. 2 x 90 degrees), either the left-hand or right-hand contact block is activated, depen­ding on the sense of rotation.
A third contact block arranged in the centre would be actuated with either sense of rotation.
Other contact versions on request.

The following selector switches with silver grey plastic front ring are stock items:
Illuminated: 1.30.242.051/2208, 1.30.242.076/2208, 1.30.242.151/2208, 1.30.242.251/2208, 1.30.242.351/2208
Non-illuminated: 1.30.242.551/0208, 1.30.242.576/0208, 1.30.242.651/0208, 1.30.242.751/0208, 1.30.242.851/0208

Stock items are marked

by bold printed order numbers.

2 - 100 Control components

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR selector switch, square collar, long handle

Pict.: Front ring, black, non-illuminated Panel cut-out to IEC 60947-5-1

Illuminability Rotating

angle

Order no.

Plastic front ring Metal front ring

Contact function Rotating angle

yes momentary 1 x 40° 1Ö + 1S 1.30.242.061/22xx 1.30.242.062/2200

yes momentary 2 x 40° 1Ö + 1S 1.30.242.086/22xx 1.30.242.087/2200

yes latching 1 x 90°, form L 1Ö + 1S 1.30.242.161/22xx 1.30.242.162/2200

yes latching 1 x 90°, form V 1Ö + 1S 1.30.242.261/22xx 1.30.242.262/2200

yes latching 2 x 60° 1Ö + 1S 1.30.242.361/22xx 1.30.242.362/2200

yes latching 2 x 90° 1Ö + 1S 1.30.242.186/22xx 1.30.242.187/2200

no momentary 1 x 40° 1Ö + 1S 1.30.242.561/02xx 1.30.242.562/0200

no momentary 2 x 40° 1Ö + 1S 1.30.242.586/02xx 1.30.242.587/0200

no latching 1 x 90°, form L 1Ö + 1S 1.30.242.661/02xx 1.30.242.662/0200

no latching 1 x 90°, form V 1Ö + 1S 1.30.242.761/02xx 1.30.242.762/0200

no latching 2 x 60° 1Ö + 1S 1.30.242.861/02xx 1.30.242.862/0200

no latching 2 x 90° 1Ö + 1S 1.30.242.686/02xx 1.30.242.687/0200

Technical data see page 2 - 96

xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08; other colours on request.

Included: Ring nut with claw.

At selector switches with 3 switching positions (e.g. 2 x 90 degrees), either the left-hand or right-hand contact block is activated, depen­ding on the sense of rotation. A third contact block arranged in the centre would be actuated with either sense of rotation.
Other contact versions on request.

Stock items are marked

by bold printed order numbers.

2 - 102 Control components

2

RAFIX

22 QR

RAFIX 22 QR

RAFIX 22 QR keylock switch

Panel cut-out to IEC 60947-5-1operating element and contact blockPict.: Front ring, metallized

Technical data

General information

Form of lens see order block
Colout of front ring see order block
Form of collar see order block

Dimensions

Length of collar see order block
Width of collar see order block
Overall height 30.6 mm
Mounting depth with
contact block without cable 56.4 mm
Mounting hole 22.3 mm
Key grid 50 x 30 mm
Diameter of collar see order block

Mechanical design

Mounting ring nut
Contact function see order block
Illuminability no
Lock Ronis
Wafers 4
Lock type 455
Main key no
Symmetric key no
Rotating angle see order block
Key removal position see order block

Mechanical characteristics

Operating force max. approx. 5 N for

1 switching element
Torque max. 2 Nm

Electrical characteristics

Protection class II

Other specifications

Operating life 0.3 million momentary /

50000 latching
Degree of protection
from front side IP65
Ambient temp. operating
min. -25 °
Ambient temp. operating
max. +70 °
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Resistance to constant
environment according to

IEC 600 68-2-3 and 2-30
Resistance at variable
environment according to

IEC 600 68-2-14 and 2-33

Description Photo Order no. Page

Accessories RAFIX 22 QR keylock switch

RAFIX 22 QR contact block with silver contacts, with cou­pling, without lamp socket, screw terminals, 1 NC + 1 NO

1.20.124.017/0000 2 - 126

RAFIX 22 QR contact block with silver contacts, with cou­pling, without lamp socket, cage clamp terminals, 1 NO

1.20.125.002/0000 2 - 126

Contact block with coupling, gold contacts,
RJ 12 connector, 1 NC + 1 NO, without LED

1.20.128.003/0000 2 - 133

Label holder, round collar, with adhesive tape and release
liner on back

5.07.620.010/0000 2 - 143

Spare key for RAFIX 22 QR 5.58.017.001/0000

For other contact blocks, refer to the chapter „Contact blocks“; for additional accessories, refer to „RAFIX 22 QR special accessories“.