RAFI RAFIX 22 FS Technical data

24

2

RAFIX

22 FS

System

RAFI offers contact blocks with quick-connect terminals for the tried and tested RAFIX 22 FS actuators.
The contact block snaps into the actuator with a gentle >>>click<<< and is thereby fitted permanently.

Concept

For those applications where designing a PCB layout is too expensive or not possible at all, a new option has been
made available by complementing the series. Catch noses provided on the new contact block snap precisely into the
actuator. The screw neck of the actuator is provided with indents safeguarding a reliable union.
The contacts of the contact block are easily connected by conventional quick-connect terminals on the rear end. A fin
arranged at the centre of the contact block with quick-connect terminals helps to ensure good insulation. It serves as a
guide for the additional LED-Clip at the same time if illumination is desired.
The new contact blocks with quick-connect terminals makes the RAFIX 22 FS series complete and perfect. Any external
control components can be integrated into the system

very easily

and

without needing any tools

and you save space,

effort and material.

Matching all RAFIX 22 FS actuators

Panel cut-out to IEC 60947:

22.3 mm with locating indent

Ring nut fixing

RAFIX 22 FS contact blocks

- Quick-connect/solder terminals

- 2.8 x 0.8 mm with soldering lugs

- Gold / silver contacts

Plug-in LED-Clip (24 V)
for illuminated actuators

RAFIX 22 FS Contact blocks with quick-connect terminals

Contact blocks with quick-connect terminals

Design

NEW

fl

29.80

Allgemeintoleranzen

mittel

2001 Datum Name

Drucktaste

Rafix FS

Bearb. 24.01 Gl ck
Ma stab: 5:1 Gepr. 24.01 gl ck
Originalformat: A2

FZ FZ 1.30 250.---

Modellname:

9.90

25.70

27.00

25

2

RAFIX

22 FS

RAFIX 22 FS Contact blocks with quick-connect terminals

• Depth behind panel only 27 mm including LED-Clip
and cable lugs

• Quick-connect/solder terminals 2.8 x 0.8 mm

• The contact block engages permanently with the
actuator only at the time of final assembly

• Compatible with all RAFIX 22 FS actuators:
Pushbuttons, selector switc hes, keylock switches, emer­gency stop buttons and signal indicators, with all advan­tages this series offers:

- Large actuating and indicating areas

- Round or square collar shape

- Panel cut-out to IEC 60947: 22.3 mm with locating

indent

- Degree of protection IP 65 (water-jet proof)

• Protection against contact for quick-connect terminals
and cable lugs: Short-circuit proof even when the
connection cables are under tensile strain

Reliable assembly method

Essential features

• Gold contacts for 100% reliable switching of low
voltage (min. 5 V / 1 mA) or

• Silver contacts (max. 250 V/4 A) for mains voltage

• Contact arrangements: 1 NC, 1 NO, 2 NC, 2 NO,
1 NC + 1 NO

• Illumination with replaceable superbright LED-Clips
in various LED colours, with quick-connect terminals

2.8 x 0.8 mm

• Actuators / contact blocks, signal indicators / lamp
sockets and LED-Clips are stocked separately and
only assembled at final assembly. This ensures
utmost flexibility and most economic stockkeeping
for this product range.

27.00

25.70

29.80

9.90

NEW