Pushbuttons 1 - 37
1
LUMO
75 (40)
LUMOTAST 75 IP40
General data
LUMOTAST 75 IP40 pushbutton range
Illuminated pushbuttons, signal lamps and keylock switches
• Mounting hole diameter 16.2 mm
• Degree of protection IP40
• Solder terminals for the following wire cross-sections:
- Installed 0.5 mm
2
max.
- Factory terminated 0.35 mm
2
max.
• 250 V/4 A max.
• 2 NC + 2 NO max. (3 NC + 3 NO on request)
• Lamp socket T 4.5
Content
LUMOTAST 75 illuminated pushbutton IP40 1 - 38
LUMOTAST 75 illuminated pushbutton IP40, protruding lens, round collar 1 - 40
LUMOTAST 75 illuminated pushbutton IP40, flush lens, square collar 1 - 41
LUMOTAST 75 illuminated pushbutton IP40, flush lens, rectangular collar 1 - 42
LUMOTAST 75 illuminated pushbutton IP40, protruding lens, square collar 1 - 43
LUMOTAST 75 keylock switch IP40 1 - 44
LUMOTAST 75 keylock switch IP40, round collar 1 - 45
LUMOTAST 75 keylock switch IP40, rectangular collar 1 - 46
LUMOTAST 75 IP40 signal lamp with lamp socket T 4.5 1 - 48
LUMOTAST 75 IP40 signal lamp with lamp socket T 4.5, round collar, protruding lens 1 - 49
LUMOTAST 75 IP40 signal lamp, square collar, flush lens 1 - 50
LUMOTAST 75 IP40 signal lamp, rectangular collar, flush lens 1 - 50
LUMOTAST 75 IP40 signal lamp, square collar, protruding lens 1 - 51
Stock items are marked
by bold printed order numbers.
1 - 38 Pushbuttons
1
LUMO
75 (40)
LUMOTAST 75 IP40
LUMOTAST 75 illuminated pushbutton IP40
Mounting holePict.: with colourless lens
Technical data
General information
Form of lens see order block
Form of collar see order block
Colour of collar see order block
Dimensions
Length of collar see order block
Width of collar see order block
Diameter of collar see order block
Overall height 7.5 mm
Mounting depth 41.5/49.5/57.5 mm
Mounting hole 16.2 mm
Mechanical design
Mounting ring nut
Terminals solder terminals
Contact system snap-action bridge contact
Contact function see order block
Contact arrangement see order block
Contact materials Ag
Illuminability yes
Lamp socket T 4.5
Mechanical characteristics
Operating force max. 3 ... 6.5 N
Operating travel 2.7 mm
Switching travel NC 1.6 mm
Switching travel NO 0.9 mm
Robustness min. 100 N
Electrical characteristics
Rated voltage AC max. 250 V
Rated voltage DC max. 220 V
Rated voltage AC/DC min. 12 V
Rated current AC max. 4 A
Rated current DC max. 0.2 A
Rated current AC/DC min. 5 mA
Contact resistance acc.
to life max. 200 mΩ
Protection class II
Other specifications
Operating life, at 250
V/2 A (operations) 200000 (momentary)
Operating life, at 250
V/4 A (operations) 60000 (momentary),
10000 (latching)
Degree of protection
from front side IP40
Ambient temp. operating
min. -25 °C
Ambient temp. operating
without lamp max. +70 °C
Ambient temp. operating
with lamp max. +55 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Resistance to constant
environment according to
IEC 600 68-2-3 and 2-30
Resistance at variable
environment according to
IEC 600 68-2-14 and 2-33
Approvals ENEC 25 T 55 (70), UL,
CSA
Flame class acc. to UL 94 V 1
Hot wire ignition acc.
to IEC 60695-2-1 yes
Description Photo Order no. Page
Accessories LUMOTAST 75 illuminated pushbutton IP40
Filament lamp, T 4.5 base, 12 V 1.90.100.022/0000 5 - 6
Filament lamp, T 4.5 base, 24 V 1.90.100.023/0000 5 - 6
Stock items are marked
by bold printed order numbers.
Pushbuttons 1 - 39
1
LUMO
75 (40)
LUMOTAST 75 IP40
Description Photo Order no.
Page
Accessories LUMOTAST 75 illuminated pushbutton IP40
LED T 4.5 superbright, red, 24 V 1.90.690.331/0000 5 - 18
LED T 4.5 superbright, green, 24 V 1.90.690.332/0000 5 - 18
LED T 4.5 superbright, yellow, 24 V 1.90.690.333/0000 5 - 18
LED T 4.5 superbright, blue, 24 V 1.90.690.334/0000 5 - 18
LED T 4.5 superbright, white, 24 V 1.90.690.335/0000 5 - 18
LED T 4.5, red, 2-3 V 1.90.692.001/0000 5 - 18
LED T 4.5, green, 2-3 V 1.90.692.002/0000 5 - 18
LED T 4.5, yellow, 2-3 V 1.90.692.003/0000 5 - 18
Lamp extractor for T 4.5/5.5, lamp diameter 4 mm 1.90.900.002/0000 5 - 22
Lamp extractor for lamp diameter 5-6 mm 1.90.900.004/0000 5 - 22
Protective cap (for 18 x 24 collar) 5.05.800.027/0000 5 - 26
Blanking cap, black, to cover spare holes, dimensions
18 x 18 mm
5.52.006.020/0103 5 - 28
Blanking cap, black, to cover spare holes, dimensions
18 x 24 mm
5.52.006.021/0100 5 - 28
Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 28
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 23
Stock items are marked
by bold printed order numbers.
1 - 40 Pushbuttons
1
LUMO
75 (40)
LUMOTAST 75 IP40
LUMOTAST 75 illuminated pushbutton IP40, protruding lens, round collar
Pict.: with colourless lens Mounting hole
Contact arrangement Contact function Colour of collar Order no.
without lens
Note
1 NC + 1 NO momentary black 1.15.108.451/0000 Please include the desired lens and
diffuser in your order.
1 NC + 1 NO latching black 1.15.108.551/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO momentary black 1.15.108.452/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO latching black 1.15.108.552/0000 Please include the desired lens and
diffuser in your order.
Technical data see page 1 - 38
Lenses:
Lens, round, transparent colourless, for filament lamp or LED: 5.49.257.011/1002
Lens, round, transparent red, for LED: 5.49.257.011/1301
Lens, round, transparent red, for filament lamp: 5.49.257.011/1303
Lens, round, transparent yellow, for filament lamp or LED: 5.49.257.011/1402
Lens, round, transparent green, for filament lamp: 5.49.257.011/1502
Lens, round, transparent green, for LED: 5.49.257.011/1503
Lens, round, transparent blue, for filament lamp: 5.49.257.011/1601
Accessories:
Diffuser, round, for filament lamp, without legend: 5.72.050.000/0202
Diffuser, round, for LED, without legend: 5.72.050.000/0214
Stock items are marked
by bold printed order numbers.
Pushbuttons 1 - 41
1
LUMO
75 (40)
LUMOTAST 75 illuminated pushbutton IP40, flush lens, square collar
Pict.: with red lens, without ring nut Mounting hole
Contact arrangement Contact function Colour of collar Order no.
without lens
Note
1 NC + 1 NO momentary black 1.15.108.251/0000 Please include the desired lens and
diffuser in your order.
1 NC + 1 NO latching black 1.15.108.351/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO momentary black 1.15.108.252/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO latching black 1.15.108.352/0000 Please include the desired lens and
diffuser in your order.
Technical data see page 1 - 38
LUMOTAST 75 IP40
Lenses:
Lens, square, transparent colourless, for filament lamp or LED: 5.49.275.036/1002
Lens, square, transparent red, for LED: 5.49.275.036/1301
Lens, square, transparent red, for filament lamp: 5.49.275.036/1303
Lens, square, transparent yellow, for filament lamp or LED: 5.49.275.036/1402
Lens, square, transparent green, for filament lamp: 5.49.275.036/1502
Lens, square, transparent green, for LED: 5.49.275.036/1503
Lens, square, transparent blue, for filament lamp: 5.49.275.036/1601
Accessories:
Sealing cap IP65 (for 18 x 18 collar): 5.05.200.009/0000
Protective cap (for 18 x 18 collar): 5.05.800.030/0000
Diffuser, square, for filament lamp, without legend: 5.73.013.000/0202
Diffuser, square, for LED, without legend: 5.73.013.000/0214
Stock items are marked
by bold printed order numbers.
1 - 42 Pushbuttons
1
LUMO
75 (40)
Lenses:
LUMOTAST 75 illuminated pushbutton IP40, flush lens, rectangular collar
Pict.: with green lens
Contact arrangement Contact function Colour of collar Order no.
without lens
Note
1 NC + 1 NO momentary black 1.15.108.051/0000 Please include the desired lens and
diffuser in your order.
1 NC + 1 NO latching black 1.15.108.151/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO momentary black 1.15.108.052/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO latching black 1.15.108.152/0000 Please include the desired lens and
diffuser in your order.
Technical data see page 1 - 38
Lens, rectangular, transparent colourless, for filament lamp or LED: 5.49.275.032/1002
Lens, rectangular, transparent red, for LED: 5.49.275.032/1301
Lens, rectangular, transparent red, for filament lamp: 5.49.275.032/1303
Lens, rectangular, transparent yellow, for filament lamp or LED: 5.49.275.032/1402
Lens, rectangular, transparent green, for filament lamp: 5.49.275.032/1502
Lens, rectangular, transparent green, for LED: 5.49.275.032/1503
Lens, rectangular, transparent blue, for filament lamp: 5.49.275.032/1601
Accessories:
Sealing cap IP65 (for 18 x 24 collar): 5.05.200.008/0000
Protective cap (for 18 x 24 collar): 5.05.800.027/0000
Diffuser, rectangular, for filament lamp, without legend: 5.73.012.000/0202
Diffuser, rectangular, for LED, without legend: 5.73.012.000/0214
Stock items are marked
by bold printed order numbers.
Pushbuttons 1 - 43
1
LUMO
75 (40)
LUMOTAST 75 IP40
LUMOTAST 75 illuminated pushbutton IP40, protruding lens, square collar
Pict.: with colourless lens Mounting hole
Contact arrangement Contact function Colour of collar Order no.
without lens
Note
1 NC + 1 NO momentary black 1.15.108.256/0000 Please include the desired lens and
diffuser in your order.
1 NC + 1 NO latching black 1.15.108.356/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO momentary black 1.15.108.257/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO latching black 1.15.108.357/0000 Please include the desired lens and
diffuser in your order.
Technical data see page 1 - 38
Lenses:
Lens, square, transparent colourless, for filament lamp or LED: 5.49.275.036/1002
Lens, square, transparent red, for LED: 5.49.275.036/1301
Lens, square, transparent red, for filament lamp: 5.49.275.036/1303
Lens, square, transparent yellow, for filament lamp or LED: 5.49.275.036/1402
Lens, square, transparent green, for filament lamp: 5.49.275.036/1502
Lens, square, transparent green, for LED: 5.49.275.036/1503
Lens, square, transparent blue, for filament lamp: 5.49.275.036/1601
Accessories:
Sealing cap IP65 (for 18 x 18 collar): 5.05.200.009/0000
Protective cap (for 18 x 18 collar): 5.05.800.030/0000
Diffuser, square, for filament lamp, without legend: 5.73.013.000/0202
Diffuser, square, for LED, without legend: 5.73.013.000/0214
Stock items are marked
by bold printed order numbers.
1 - 44 Pushbuttons
1
LUMO
75 (40)
LUMOTAST 75 IP40
LUMOTAST 75 keylock switch IP40
Mounting hole
Technical data
General information
Form of lens see order block
Colour of collar see order block
Form of collar see order block
Dimensions
Length of collar see order block
Diameter of collar see order block
Width of collar see order block
Overall height (without
key) 7.5 mm
Mounting depth see order block
Mounting hole 16.2 mm
Mechanical design
Mounting ring nut
Terminals solder terminals
Contact system snap-action bridge contact
Contact function see order block
Contact arrangement see order block
Contact materials Ag
Illuminability no
Lock cylinder lock
Wafers 4 pins
Lock type 1D 21
Number of locking
positions 45
Main key no
Symmetric key no
Key removal position see order block
Mechanical characteristics
Rotating angle see order block
Electrical characteristics
Rated voltage AC max. 250 V
Rated voltage DC max. 220 V
Rated voltage AC/DC min. 12 V
Rated current AC max. 4 A
Rated current DC max. 0.02 A
Rated current AC/DC min. 5 mA
Contact resistance acc.
to life max. 200 mΩ
Bouncing time max. 10 ms
ESD-strength min. 14 kV
Other specifications
Operating life, at 250
V/2 A (operations) 50000 (momentary)
Operating life, at 250
V/4 A (operations) 50000 (momentary)
Degree of protection
from front side IP40
Ambient temp. operating
min. -25 °C
Ambient temp. operating
max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Resistance to constant
environment according to
IEC 600 68-2-3 and 2-30
Resistance at variable
environment according to
IEC 600 68-2-14 and 2-33
Weight max. 35 g
Approvals ENEC 25 T 55 (70), UL,
CSA
Flame class acc. to UL 94 V 1
Hot wire ignition acc.
to IEC 60695-2-1 yes
Description Photo Order no.
Page
Accessories LUMOTAST 75 keylock switch IP40
Blanking cap, black, to cover spare holes, dimensions
18 x 24 mm
5.52.006.021/0100 5 - 28
Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 28
Stock items are marked
by bold printed order numbers.
Pushbuttons 1 - 45
1
LUMO
75 (40)
LUMOTAST 75 IP40
Description Photo Order no.
Page
Accessories LUMOTAST 75 keylock switch IP40
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 23
Key cap for LUMO 75 5.58.002.030/0000
Spare key for LUMO 75 5.58.004.721/0000
LUMOTAST 75 keylock switch IP40, round collar
Mounting hole
Contact
arrangement
Rotating angle
Order no.
Contact function Key removal
position
Colour of collar
1 NC + 1 NO latching 0 black90° 1.15.108.851/0000
1 NC + 1 NO latching 0+1 black90° 1.15.108.911/0000
1 NC + 1 NO momentary 0 black45° 1.15.108.941/0000
2 NC + 2 NO latching 0 black90° 1.15.108.852/0000
2 NC + 2 NO latching 0+1 black90° 1.15.108.912/0000
Technical data see page 1 - 44
Included: 2 keys.
Other lock variants and contacts available on request.
Stock items are marked
by bold printed order numbers.
1 - 46 Pushbuttons
1
LUMO
75 (40)
LUMOTAST 75 IP40
LUMOTAST 75 keylock switch IP40, rectangular collar
Panel cut-out
Contact
arrangement
Rotating angle
Order no.
Contact function Key removal
position
Colour of collar
1 NC + 1 NO latching 0 black90° 1.15.108.571/0100
1 NC + 1 NO latching 0+1 black90° 1.15.108.631/0100
1 NC + 1 NO momentary 0 black45° 1.15.108.661/0100
2 NC + 2 NO latching 0 black90° 1.15.108.572/0100
2 NC + 2 NO latching 0+1 black90° 1.15.108.632/0100
Technical data see page 1 - 44
Included: 2 keys.
Other lock variants and contacts available on request.
Loading...